几何光学法用于飞机进气道 RCS 的计算

运用电磁场理论的几何光学法解决飞机进气道雷达截面(RCS)的计算。计算结果与实测值基本相符,使得复杂的飞机进气道雷达特性可以简化处理。此法既简单又严密。     

目标起伏特性对雷达威力性能的影响分析

介绍了典型雷达目标RCS起伏模型,阐述了起伏目标在实际中的应用,建立了目标损耗和雷达作用距离之间的关系,为不同目标的等效替代推算提供了理论依据.验证了雷达目标满足卡平方分布时发现概率和起伏因子之间的关系.并针对不同类型的起伏目标,建立了雷达探测距离和发现概率之间的关系,为雷达的威力检测和飞行目标的航线设计提供依据.     

地面运动激励下水中椭圆柱体的弯曲响应

首先论证了水中椭圆柱体湿模态的正交性,然后再利用湿模态展开研究了柱体在地面运动激励下的响应．由于实现了广义坐标解耦,从而得到了一个简洁的解式．     

Analysis of the mass of behind-armor debris generated by RHA subjected to normal penetration of variable cross-section EFP

Analyzing the mass of behind-armor debris (BAD) generated by Rolled Homogeneous Armor (RHA) subjected to normal penetration of variable cross-section Explosively Formed Projectile (EFP) is the purpose of this paper. So theoretical analysis, numerical simulation and experimental data are combined to analyze the influence of variable cross-section characteristic on the time history of crater radius. Moreover the relationships between time history of crater radius (as well as mass of BAD) and the thickness of RHA (from 30 mm to 70 mm) and the impact velocity of EFP (1650 m/s to 1860 m/s) are also investigated. The results indicate that: 1) being compared to the variable cross-section characteristic is ignored, the theoretical time history of crater radius is in better agreement with the simulation results when the variable cross-section characteristic is considered; 2) being compared to the other three conditions of plug, the theoretical mass of BAD is in the best agreement with the simulation results when the shape of plug is frustum of a cone and the angle between generatrix and bottom is 45° and the axial length of mushroom is considered.     

测量控制隧道开挖断面技术应用研究

介绍了毛洞断面测量系统的组成及原理,阐述了利用TC(R)1101全站仪构架的断面测量控制系统在地下隧道施工中的应用,包括准备工作、断面测量、搬移测站以及内业整理,并对测量控制隧道开挖断面技术的应用效果及效益进行了详细分析。该技术在控制断面超欠挖,提高光面爆破水平效果明显。     

激光模拟器的模匹配

本文根据椭圆高斯模的传输和变换理论,分析了椭圆高斯模的模式变换,讨论了模式匹配的计算,并列举了两种椭圆高斯模的计算实例。     

Rigid elliptical cross-section ogive-nose projectiles penetration into concrete targets

The elliptical cross-section ogive-nose projectile (ECOP) has recently attracted attention because it is well suited to the flattened shape of earth-penetrating weapons. However, the penetration performance of ECOPs has not been completely understood. The objective of this study was to investigate the pene-tration performance of ECOPs into concrete targets using a theoretical method. A general geometric model of ECOPs was introduced, and closed-form penetration equations were derived according to the dynamic cavity-expansion theory. The model was validated by comparing the predicted penetration depths with test data, and the maximum deviation was 15.8％. The increment in the penetration depth of the ECOP was evaluated using the proposed model, and the effect of the major—minor axis ratio on the increment was examined. Additionally, the mechanism of the penetration-depth increment was inves-tigated with respect to the caliber radius head, axial stress, and resistance.     

不同截面形状复合长杆弹对陶瓷复合靶板侵彻研究

采用数值模拟技术研究了由3种不同截面形状的钨芯外包覆一层钢,形成的钢包覆层复合长杆弹在入射速度为1200m/s～1700m/s时对陶瓷/金属复合靶板的侵彻过程。结果表明:对于同一入射速度、相同弹体长度、同种材料的弹芯和包覆层以及靶板材料而言,等面积的六边形截面钨芯复合长杆弹的侵彻深度明显大于圆形及方形截面,方形及六边形截面与和它们等外接圆形成的圆形截面复合长杆弹侵彻深度没有明显差别,本研究认为这是与不同截面钨芯的外接圆直径直接相关。六边形截面长杆弹侵彻过程中的自锐化现象是其侵彻深度明显大于其它两种弹体的主要原因。