Fabrication of AA7005/TiB2-B4C surface composite by friction stir processing: Evaluation of ballistic behaviour

The present work aims to enhance the ballistic resistance of AA7005 alloy by incorporating the TiB₂ and B₄C ceramic reinforcement particles. Surface composites with different weight fractions of TiB₂ and B₄C particles were processed by friction stir processing. Micro-hardness and depth of penetration tests were carried out to evaluate the ballistic properties of the surface composites. The surface hardness of the composite was found to be nearly 70 HV higher than base alloy. The depth of penetration of the steel projectile was 20–26 mm in the composites as compared to 37 mm in the base alloy. Ballistic mass efficiency factor of the surface composite was found to be 1.6 times higher than base alloy. This is mainly attributed to the dispersion strengthening from the reinforcement particles.     

Vapor-phase decomposition of dimethyl methylphosphonate (DMMP), a sarin surrogate,in presence of metal oxides

Chemical warfare agents (CWA) are stockpiled in large quantities across the globe. Agents stored in inaccessible facilities need to be destroyed rapidly without dispersing the compounds to surrounding areas. Metal-based energetic formulations are used in such prompt defeat applications to rapidly decompose the CWA by generating a high temperature environment. An alternate, and possibly a more effective decomposition pathway could be provided by chemicidal action of aerosolized condensed combustion products, which typically consist of metal oxides. Toxic fumes that escape the high tem-perature blast zone can be neutralized by smoke generated during combustion, depending on the par-ticle size, surface characteristics, chemical properties, and concentration of this smoke. This review considers relevant experimental and modeling studies quantifying decomposition of CWA comprising organophosphorus compounds and their surrogates on the surface of various metal oxides. Dimethyl methylphosphonate (DMMP), a sarine surrogate, was used most commonly for such experiments. Many reported efforts focused on the mechanisms of adsorption of DMMP to various metal oxides and initial reaction steps cleaving various bonds from the chemisorbed molecules. For selected oxides, these ex-periments were supported by quantum-mechanical calculations. In other studies, the capacity of oxide surfaces to adsorb and decompose DMMP was quantified. In most cases, porous catalysts were used although limited experimental data are available for aerosolized nonporous oxide particles. The reported experimental data applicable to scenarios involving prompt decomposition of CWA are summarized. It is noted that information is lacking describing respective heterogeneous reaction kinetics. Preliminary estimates of aerosolized smoke particle concentrations required to destroy CWA are made considering gas phase diffusion rates and reported values of the oxide capacity to decompose CWA or their surrogates.     

金属泡沫复合材料夹芯结构的压痕响应实验

金属泡沫夹芯结构是近年来新出现的一种明显具有结构和功能一体化特点的新型轻质材料,它在临近空间飞行器、航海及汽车等领域有着广阔的应用前景。以以纤维增强复合材料面板、闭孔泡沫铝芯子为特征的复合材料夹芯结构为研究对象,对其在球形压头作用下的压痕响应、损伤模式、变形机制和失效机理进行理论分析和实验研究。研究发现,泡沫铝复合材料夹芯结构的压痕响应是夹芯结构的各个组成部分的响应、相互作用以及压头属性的综合作用结果。泡沫铝复合材料夹芯结构在球压头作用下的损伤模式为基体开裂、纤维断裂、层间分层、泡沫铝的屈服及剪切断裂五种失效模式。     

金属泡沫断裂韧性的试验研究

金属泡沫在其实际应用中,断裂性能和断裂韧性对于承载的多孔金属泡沫有着重要的意义。基于美国试验材料学会相关标准,采用三点弯曲试样测定了铝泡沫的I型断裂韧性。研究表明,金属泡沫的断裂为脆性断裂,在裂纹尖端附近,孔壁最薄弱的区域最容易发生变形;随着进一步加载,一些孔壁发生断裂,微裂纹在断裂尖端附近出现。随着载荷的增加,主裂纹在缺口根部形成或由微裂纹合并而成,并开始在多孔结构内传播。裂纹沿着结构最薄弱处传播,并产生次生裂纹和裂纹桥。裂纹总的扩展方式还是I型断裂。根据试验P-V曲线特点,取最大载荷点对应的力与位移求解出铝泡沫的裂纹尖端临界张开位移的平均值为0.051 mm。     

Numerical investigation on cooling performance of filter in a pyrotechnic gas generator

As a key part of the pyrotechnic gas generator,the filter not only removes the particulate matter but also cools the hot gas to a safe level.This paper aims to improve the understanding of the basic heat and flow phenomenon in the gas generator.The pyrotechnic gas generator is modelling by a simplified filter structure with fiber arrays.A finite-volume model of the heat and fluid flow is proposed to simulate the detailed multi-dimensional flow and energy conversion behaviors.Several verification results are in good agreement with data in different references.Simulation results demonstrate that the filter can not only absorb heat from the gas but also cause the high intensity enhancement of the heat transfer.The per-formance difference between inline and staggered arrays is also discussed.The findings of the study put a further prediction tool for the understanding and design of the filter system with fibers.     

金属橡胶材料在某型自行火炮闩体挡杆缓冲装置中的应用

闩体挡杆折断是大口径火炮射击时容易出现的问题之一 ,其主要原因是闩体挡杆的缓冲装置不能满足使用要求。采用新型弹性阻尼材料———金属橡胶设计制作了闩体挡杆的缓冲装置样件 ,并进行了静态刚度和动态冲击试验 ,结果表明 ,金属橡胶制作的样件有较好的性能指标和使用寿命。