Experimental and numerical investigations of interface properties of Ti6Al4V/CP-Ti/Copper composite plate prepared by explosive welding

Explosive welding technique is widely used in many industries. This technique is useful to weld different kinds of metal alloys that are not easily welded by any other welding methods. Interlayer plays an important role to improve the welding quality and control energy loss during the collision process. In this paper, the Ti6Al4V plate was welded with a copper plate in the presence of a commercially pure titanium interlayer. Microstructure details of welded composite plate were observed through optical and scanning electron microscope. Interlayer-base plate interface morphology showed a wavy structure with solid melted regions inside the vortices. Moreover, the energy dispersive spectroscopy analysis in the interlayer-base interface reveals that there are some identified regions of different kinds of chemical equilibrium phases of Cu–Ti, i.e. CuTi, Cu₂Ti, CuTi₂, Cu₄Ti, etc. To study the mechanical properties of composite plates, mechanical tests were conducted, including the tensile test, bending test, shear test and Vickers hardness test. Numerical simulation of explosive welding process was performed with coupled Smooth Particle Hydrodynamic method, Euler and Arbitrary Lagrangian-Eulerian method. The multi-physics process of explosive welding, including detonation, jetting and interface morphology, was observed with simulation. Moreover, simulated plastic strain, temperature and pressure profiles were analysed to understand the welding conditions. Simulated results show that the interlayer base plate interface was created due to the high plastic deformation and localized melting of the parent plates. At the collision point, both alloys behave like fluids, resulting in the formation of a wavy morphology with vortices, which is in good agreement with the experimental results.     

Effects of material of metallic frame on the penetration resistances of ceramic-metal hybrid structures

The effects of metallic material on the penetration resistances of ceramic-metal hybrid structures against vertical long-rod tungsten projectiles were studied by artillery-launched experiments and numerical simulation. Hybrid structures with rectangular cores in transverse orthogonal arrangement and slide-fitting ceramic inserts of zirconia toughened alumina prisms were fabricated with titanium alloy TC4 (Ti6Al4V), AISI 4340 steel and 7075 aluminum alloy panels, respectively. The results showed that the hybrid structure of Ti6Al4V exhibited the highest penetration resistance, followed by that of 7075 aluminum alloy with the same area density. The penetration resistance of the hybrid structure of AISI 4340 steel was the lowest. The underlying mechanisms showed that the metallic material of a ceramic-metal hybrid structure can directly affect its energy absorption from the impact projectile, which further affects its penetration resistance. Different metallic frames exhibited different failure characteristics, resulting in different constraint conditions or support conditions for ceramic prisms. The high penetration resistance of the Ti6Al4V hybrid structure was due to its stronger back support to ceramic prisms as compared with that of AISI 4340 steel hybrid structure, and better constraint condition for ceramic prisms by metallic webs as compared with that of 7075 aluminum alloy hybrid structure. The results of mass efficiency and thickness efficiency showed that the Ti6Al4V hybrid structure has advantages in reducing both the thickness and the mass of protective structure. In addition, because the ceramic-metal hybrid structures in the present work were heterogeneous, impact position has slight influence on their penetration resistances.     

Combustion characteristic and aging behavior of bimetal thermite powders

Nanothermites have been employed as fuel additives in energetic formulations due to their higher en-ergy density over CHNO energetics. Nevertheless, sintering and degradation of nanoparticles signifi-cantly limit the practical use of nanothermites. In this work, combustion characteristic and aging behavior of aluminum/iron oxide (Al/Fe2O3) nanothermite mixtures were investigated in the presence of micron-scale nickel aimed to produce bimetal thermite powders. The results showed that the alumina content in the combustion residue increased from 88.3％ for Al/Fe2O3 nanothermite to 96.5％ for the nanothermite mixture containing 20 wt％nickel. Finer particle sizes of combustion residue were obtained for the nanothermite mixtures containing nickel, indicative of the reduced agglomeration. Both results suggested a more complete combustion in the bimetal thermite powders. Aging behavior of the nano-thermite mixture was also assessed by measuring the heat of combustion of the mixture before and after aging process. The reduction in heat of combustion of nanothermite mixtures containing nickel was less severe as compared to a significant decrease for the nanothermite mixture without nickel, indicating better aging resistance of the bimetal thermite powders.     

Fabrication and analysis of TIG welding-brazing butt joints of in-situ TiB2/7050 composite and TA2

Lightweight hybrid structures of Al MMCs and titanium alloy dissimilar materials have great prospect in the defence industry application. So, it is necessary to join Al MMCs with Ti metal to achieve this structural design. In this work, in-situ TiB2/7050 composite and TA2 were firstly attempted to join by TIG welding-brazing technique. The result was that the intact welding-brazing butt joint was successfully fabricated. The joint presents dual characteristics, being a brazing on TA2 side and a welding on TiB2/7050 side. At brazing joint side, ER4043 filler metal effectively wets on TA2 under TIG heating condition, and a continuous interfacial reaction layer with 1—3μm is formed at welded metal/TA2 interface. The whole interfacial reaction layers are composed of Ti(AlSi)3 intermetallic compounds (IMCs), but their morphologies at the different regions present obvious distinguishes. The microhardness of the reaction layers is as much as 141—190 HV. At welding joints side, the fusion zone appears the equixaed crystal structure, and the grain sizes are much smaller than those of welded metal, which is attributed to the effect of TiB2 particulates from the melted TiB2/7050 on acceleration formation and inhibiting growth for the new crystal nucleus. The tensile test results show that average tensile strength of the optimal welding-brazing joint is able to achieve 138 MPa. The failure of the tensile joint occurs by quasi-cleavage pattern, and the cracks initiate from the IMCs layer at the groove surface of TA2 and propagate into the welded metal.     

航空轮胎用橡胶弹性体Mullins效应动态加载方法

航空轮胎用橡胶弹性体在服役过程中遭受严苛的动态循环工况。为了研究弹性体在此工况下的力学响应特征和损伤机理,提出基于应力波作用的Mullins效应动态加载实验方法。根据应力波传导与作用特征,采用Hopkinson压杆加载思路,设计和配置了各单元尺寸参数,进而搭建可用于橡胶弹性体材料动态循环加载的实验系统,并开展了航空轮胎用丁苯橡胶的动态循环加载试验。基于试验信号分析发现：加载系统实现了弹性体材料Mullins效应动态应变递增的试验加载。最后开展加载测试参数的影响因素分析,结果表明通过优化系统各单元可实现Mullins效应的动态加、卸载参数的控制。     

Dynamic necking of a near α titanium alloy at high strain rates:Experiments and modelling

The tensile behaviour of near α Ti3Al2.5 V alloy, conceived for applications in aerospace and automotive engineering, is characterized from quasi-static to high strain rates. The material is found to present noticeable strain rate sensitivity. The dynamic true strain rate in the necking cross-section reaches values up to ten times higher than the nominal strain rate. It is also observed that beyond necking the dynamic true stress-strain curves present limited rate dependence. The experimental results at different strain rates are used to determine a suitable constitutive model for finite element simulations of the dynamic tensile tests. The model predicts the experimentally macroscopic force-time response, true stress-strain response and effective strain rate evolution with good agreement.     

Formation of adiabatic shearing band for high-strength Ti-5553 alloy: A dramatic thermoplastic microstructural evolution

By using split Hopkinson pressure bar, optical microscopy and electronic microscopy, we investigate the influence of initial microstructures on the adiabatic shear behavior of high-strength Ti–5Al–5V–5Mo–3Cr (Ti-5553) alloy with lamellar microstructure and bimodal microstructure. Lamellar alloy tends to form adiabatic shearing band (ASB) at low compression strain, while bimodal alloy is considerably ASB-resistant. Comparing with the initial microstructure of Ti-5553 alloy, we find that the microstructure of the ASB changes dramatically. Adiabatic shear of lamellar Ti-5553 alloy not only results in the formation of recrystallized β nano-grains within the ASB, but also leads to the chemical redistribution of the alloying elements such as Al, V, Cr and Mo. As a result, the alloying elements distribute evenly in the ASB. In contrast, the dramatic adiabatic shear of bimodal alloy might give rise to the complete lamination of the globular primary α grain and the equiaxial prior β grain, which is accompanied by the dynamic recrystallization of α lamellae and β lamellae. As a result, ASB of bimodal alloy is composed of α/β nano-multilayers. Chemical redistribution does not occur in ASB of bimodal alloy. Bimodal Ti-5553 alloy should be a promising candidate for high performance armors with high mass efficiency due to the processes high dynamic flow stress and excellent ASB-resistance.     

Experimental investigation of Tie6Ale4V titanium alloy and 304L stainless steel friction welded with copper interlayer

The basic principle of friction welding is intermetallic bonding at the stage of super plasticity attained with self-generating heat due to friction and finishing at upset pressure. Now the dissimilar metal joints are especially popular in defense, aerospace, automobile, bio-medical,refinery and nuclear engineerings. In friction welding, some special alloys with dual phase are not joined successfully due to poor bonding strength. The alloy surfaces after bonding also have metallurgical changes in the line of interfacing. The reported research work in this area is scanty. Although the sound weld zone of direct bonding between Tie6Ale4 V and SS304 L was obtained though many trials, the joint was not successful. In this paper, the friction welding characteristics between Tie6Ale4 V and SS304 L into which pure oxygen free copper(OFC) was introduced as interlayer were investigated. Boxe Behnken design was used to minimize the number of experiments to be performed. The weld joint was analyzed for its mechanical strength. The highest tensile strength between Tie6Ale4 V and SS304 L between which pure copper was used as insert metal was acquired. Micro-structural analysis and elemental analysis were carried out by EDS, and the formation of intermetallic compound at the interface was identified by XRD analysis.     

基于DDS的虚拟信号发生器LabVIEW程序设计

针对传统信号发生器存在的成本高、功能单一、电子线路复杂等缺点,设计了一种基于频率合成技术的虚拟任意信号发生器。通过动态链接库(DLL)与下位机设备DDS-3X25进行通信,基于"模块化"和事件结构的设计思想,用LabVIEW编程实现了基本波形、任意波形、噪声叠加、波形数据载入、波形数据量化转换和线性插值等程序模块。实验结果表明,该设计不仅能产生纯净和叠加噪声的正弦波、方波、三角波和锯齿波等基本波形,而且可以输出手绘的任意波形,验证了设计的有效性。     

软硬交替多层膜法向压入过程的有限元分析

采用大变形弹塑性有限单元法,对高速钢基体上的软硬交替多层膜在法向压痕作用下的力学行为,进行了模拟和分析.为了研究膜层数和膜厚的影响,对从单层到16层的不同膜层体系进行了计算.通过对诸如膜层的变形、最大应力随膜层数的变化、界面剪应力分布、表面张应力分布等的分析,得出了这些参数的分布及其对膜层体系的摩擦学性能的影响.这些结果可为多层膜的结构优化设计提供定量的依据.     

Ti含量对Ti-B4C-C体系自蔓延高温合成的影响

以14Ti+3B4C+5C为基础反应体系,通过热力学分析及静态燃烧合成实验研究了钛含量对该体系SHS反应的绝热温度、反应速度和产物致密度的影响.研究表明,Ti含量适当增加,能够使反应速度加快、产物致密度提高.当Ti过量16%(摩尔分数)时,体系的绝热温度仍高达3 193K,反应速度最快,产物的致密度也较高.     

Mechanical behavior and failure mechanism of polyurea nanocomposites under quasi-static and dynamic compressive loading

Polyurea is an elastomeric material that can be applied to enhance the protection ability of structures under blast and impact loading.In order to study the compressive mechanical properties of SiC/polyurea nanocomposites under quasi-static and dynamic loading,a universal testing machine and split Hop-kinson pressure bar(SHPB)apparatus were used respectively.The stress-strain curves were obtained on polyurea and its composites at strain rates of 0.001-8000 s-1.The results of the experiment suggested that increase in the strain rates led to the rise of the flow stress,compressive strength,strain rate sensitivity and strain energy.This indicates that all of the presented materials were dependent on strain rate.Moreover,these mechanical characters were enhanced by incorporating a small amount of SiC into polyurea matrix.The relation between yield stress and strain rates were established using the power law functions.Finally,in order to investigate the fracture surfaces and inside information of failed specimens,scanning electron microscopy(SEM)and micro X-ray computed tomography(micro-CT)were used respectively.Multiple voids,crazes,micro-cracks and cracking were observed in fracture surfaces.On the other hand,the cracking propagation was found in the micro-CT slice images.It is essential to understand the deformation and failure mechanisms in all the polyurea materials.     

X射线衍射仪图谱的定量分析初探

在XD-2型X射线衍射仪分析软件的基础上,制作了Al2O3定量分析所用的内标曲线,并对混合物样品中的物相进行了定量分析,结果和配比值完全一致,说明这种定量分析方法均能运用于多相混合物中物相的定量分析     

铝合金-纯铝-钢复合板爆炸焊接试验及性能研究

通过设计爆炸焊接试验复合了铝合金-纯铝-钢爆炸复合板,对其界面形态、显微硬度及力学性能进行了研究。结果表明,铝合金-纯铝界面纯规则正弦波形,纯铝-钢复合板界面波形较小,铝合金-纯铝-钢复合板的界面剪切强度在75 MPa以上,爆炸复合过程中,纯铝与钢界面生成了金属间化合物,其界面处基体金属发生强烈的塑性变形。复合板变形及组织变化的结果造成复合板界面处的显微硬度最高,随着距界面距离的增加,两侧基体金属的硬度逐渐降低。     

原位反应电火花沉积TiN陶瓷增强相的工艺性能

以TC4钛合金为电极,氮气作为反应气和保护气,在45钢表面原位反应生成含TiN的沉积层。对电压、电容、频率、转速和比沉积时间5个沉积层厚度影响因子,各设4个工艺水平,进行正交试验,研究多项工艺参数同时变化时沉积层厚度的变化规律。结果表明：选用电容为120μF,输出电压145 V,比沉积时间3 min/cm2时可获得综合质量最优的沉积层。电火花反应沉积层与基体形成冶金结合,沉积层均匀致密,厚度约为30～40μm,主要由TiN、FeTi和Fe9.64Ti0.36组成。沉积层的弹性模量为183.614 GPa,而纳米硬度达14.039 GPa,是基体的4倍。结果表明：原位反应电火花沉积可有效改善材料的表面性能。     

Numerical investigation of the failure mechanism of cubic concrete specimens in SHPB tests

Cylindrical specimens are commonly used in Split Hopkinson pressure bar (SHPB) tests to study the uniaxial dynamic properties of concrete-like materials.In recent years,true tri-axial SHPB equipment has also been developed or is under development to investigate the material dynamic properties under tri-axial impact loads.For such tests,cubic specimens are needed.It is well understood that static material strength obtained from cylinder and cube specimens are different.Conversion factors are obtained and adopted in some guidelines to convert the material strength obtained from the two types of specimens.Previous uniaxial impact tests have also demonstrated that the failure mode and the strain rate effect of cubic specimens are very different from that of cylindrical ones.However,the mechanical background of these findings is unclear.As an extension of the previous laboratory study,this study performs numerical SHPB tests of cubic and cylindrical concrete specimens subjected to uniaxial impact load with the validated numerical model.The stress states of cubic specimens in relation to its failure mode under different strain rates is analyzed and compared with cylindrical specimens.The detailed analyses of the numerical simulation results show that the lateral inertial confinement of the cylindrical specimen is higher than that of the cubic specimen under the same strain rates.For cubic specimen,the corners are more severely damaged because of the lower lateral confinement and the occurrence of the tensile radial stress which is not observed in cylindrical specimens.These results explain why the dynamic material strengths obtained from the two types of specimens are different and are strain rate dependent.Based on the simulation results,an empirical formula of conversion factor as a function of strain rate is proposed,which supplements the traditional conversion factor for quasi-static material strength.It can be used for transforming the dynamic compressive strength from cylinders to cubes obtained from impact tests at different strain rates.     

Research on the fracture behavior of PBX under static tension

The fracture behavior of polymer-bonded explosive (PBX) seriously affects the safety and reliability of weapon system. The effects of interface debonding and initial meso-damage on the fracture behavior of PBX under quasi-static tension are studied using numerical method. A two-dimensional representative volume element (RVE) is established based on Voronoi model in which the component contents could be regulated and the particles are randomly distributed. A nonlinear damage model of polymer matrix relative to matrix depth between particles is constructed. The results show that the simulated strain-stress relation is coincident with experiment data. It is found that interface debonding leads to the nucleation and propagation of meso-cracks, and a main crack approximately perpendicular to the loading direction is generated finally. The interface debonding tends to occur in the interface perpendicular to the loading direction. There seems to be a phenomenon that strain softening and hardening alternatively appear around peak stress of stress and strain curve. It is shown that the initial damages of intragranular and interfacial cracks both decrease the modulus and failure stress, and the main crack tends to propagate toward the initial meso-cracks.     

Prediction of flow stress of 7017 aluminium alloy under high strain rate compression at elevated temperatures

An artificial neural network(ANN) constitutive model and JohnsoneC ook(Je C) model were developed for 7017 aluminium alloy based on high strain rate data generated from split Hopkinson pressure bar(SHPB) experiments at various temperatures. A neural network configuration consists of both training and validation, which is effectively employed to predict flow stress. Temperature, strain rate and strain are considered as inputs, whereas flow stress is taken as output of the neural network. A comparative study on Johnsone Cook(Je C) model and neural network model was performed. It was observed that the developed neural network model could predict flow stress under various strain rates and temperatures. The experimental stressestrain data obtained from high strain rate compression tests using SHPB over a range of temperatures(25 e300 C), strains(0.05e0.3) and strain rates(1500e4500 s 1) were employed to formulate JeC model to predict the flow stress behaviour of 7017 aluminium alloy under high strain rate loading. The JeC model and the back-propagation ANN model were developed to predict the flow stress of 7017 aluminium alloy under high strain rates, and their predictability was evaluated in terms of correlation coefficient(R) and average absolute relative error(AARE). R and AARE for the J-C model are found to be 0.8461 and 10.624%, respectively, while R and AARE for the ANN model are 0.9995 and 2.58%, respectively. The predictions of ANN model are observed to be in consistent with the experimental data for all strain rates and temperatures.     

飞行器动态滑翔的受力平衡状态

为了研究动态滑翔的物理本质,从受力平衡的角度出发,根据物理定律推导平衡方程,从数学上求解出方程解集构成的平衡曲线。以信天翁和某小型无人机在不同风梯度下滑翔为例对平衡曲线进行仿真。分析和仿真结果表明:平衡曲线是满足受力平衡的所有速度状态的集合,由上升和下降两个分支构成;上升分支只有当风梯度足够大时才存在,是动态滑翔的关键。     

B4C/Al复合板中应力波行为分析（Ⅰ）

依据7.62mm穿甲燃烧弹与B4C,Al板的物理和力学特性,提出弹、板的力学模型;在此基础上,给出弹板碰撞后B4C/Al复合板的弹性动力学方程,建立应力波的传播模型,讨论了应力波传播时复合板的力学行为,最后确定了复合板承受的初始冲击应力。理论分析表明：一维应变条件的B4C和Al板的弹性极限高于一维应力条件下的值;弹、板间的作用力服从指数衰减规律;B4C板的初始应力高于430MPa时,应力波的作用使Al板在卸载过程中发生反向屈服。