陶瓷基复合装甲防12.7mm穿甲燃烧弹的靶试研究（Ⅱ）

基于对材料特性和防弹机理的认识,设计了由（SiC＋Si）陶瓷、616装甲钢和高强PE材料构成的陶瓷基复合靶板,靶板防护面密度为118 kg/m2,尺寸为500 mm×500 mm×25 mm。利用现役12.7 mm穿甲燃烧弹考核靶板在6发弹打击下的防护能力,检验靶板设计思路。结果表明：靶板结构是可行的,可防住V25为818 m/s的现役12.7 mm穿甲燃烧弹。     

Interface defeat studies of long-rod projectile impacting on ceramic targets

The interface defeat phenomenon always occurs when a long-rod projectile impacting on the ceramic target with certain velocity, i.e., the projectile is forced to flow radially on the surface of ceramic plates for a period of time without significant penetration. Interface defeat has a direct effect upon the ballistic performance of the armor piercing projectile, which is studied numerically and theoretically at present. Firstly, by modeling the projectiles and ceramic targets with the SPH (Smoothed Particle Hydrodynamics) particles and Lagrange finite elements, the systematic numerical simulations on interface defeat are performed with the commercial finite element program AUTODYN. Three different responses, i.e., complete interface defeat, dwell and direct penetration, are reproduced in different types of ceramic targets (bare, buffered, radially confined and oblique). Furthermore, by adopting the validated numerical algorithms, constitutive models and the corresponding material parameters, the influences of projectile (material, diameter, nose shape), constitutive models of ceramic (JH-1 and JH-2 models), buffer and cover plate (thickness, constraints, material), as well as the prestress acted on the target (radial and hydrostatic) on the interface defeat (transition velocity and dwell time) are systematically investigated. Finally, based on the energy conservation approach and taking the strain rate effect of ceramic material into account, a modified model for predicting the upper limit of transition velocity is proposed and validated. The present work and derived conclusions can provide helpful reference for the design and optimization of both the long-rod projectile and ceramic armor.     

陶瓷基复合装甲防12.7mm穿甲燃烧弹的靶试研究（Ⅰ）

基于对材料特性和防弹机理的认识,设计了由Al2O3陶瓷、616装甲钢和高强PE材料构成的陶瓷基复合装甲板,并用现役127.mm穿甲燃烧弹进行靶试考核,检验靶板设计思路,结果表明：防护面密度为128 kg/m2的靶板可防住该弹。     

4层横向运动板防护长细杆的数值分析

多层横向运动板对垂直来侵长细杆的挤压、剪切能够使长细杆发生挤压和剪切变形,进而降低长细杆后续的侵彻能力,增强装甲的防护效果。利用LS—DYNA软件对多层横向、邻层反向运动的钢装甲板防护钨合金长细杆进行运动板速度和运动板的厚度分配的相关仿真计算。通过对计算结果中开坑形状、后效板侵深和装甲效能进行分析发现,随着板运动速度的增加,后效板开坑深度减小和开坑形状的非对称性加剧,运动板的干扰作用增强及防护效能提高;在运动板总厚度相同的情况下,板的层数越少,防护性能越好。     

防半穿甲导弹战斗部动能穿甲模拟试验研究

根据半穿甲导弹破坏机理和穿甲力学中的相似理论 ,以目前世界上典型的半穿甲导弹战斗部为模拟对象 ,设计出试验装置、弹丸和 3个系列共十几种结构形式的靶板 .通过对试验结果的分析比较 ,得出各种装甲结构形式抗半穿甲导弹动能穿甲特性 .     

陶瓷基装甲抗枪弹机理研究现状

从陶瓷基装甲的特点出发,介绍了其抗弹性能的评定指标,讨论了弹靶撞击过程的划分,重点评述了抗弹机理的研究方法和陶瓷基装甲的耗能机制;并总结了影响陶瓷基装甲抗枪弹性能的4个主要因素:陶瓷厚度、约束条件、弹丸形状和撞击速度.     

Determination of penetration depth at high velocity impact using finite element method and artificial neural network tools

Determination of ballistic performance of an armor solution is a complicated task and evolved significantly with the application of finite element methods(FEM) in this research field.The traditional armor design studies performed with FEM requires sophisticated procedures and intensive computational effort,therefore simpler and accurate numerical approaches are always worthwhile to decrease armor development time.This study aims to apply a hybrid method using FEM simulation and artificial neural network(ANN) analysis to approximate ballistic limit thickness for armor steels.To achieve this objective,a predictive model based on the artificial neural networks is developed to determine ballistic resistance of high hardness armor steels against 7.62 mm armor piercing ammunition.In this methodology,the FEM simulations are used to create training cases for Multilayer Perceptron(MLP) three layer networks.In order to validate FE simulation methodology,ballistic shot tests on 20 mm thickness target were performed according to standard Stanag 4569.Afterwards,the successfully trained ANN(s) is used to predict the ballistic limit thickness of 500 HB high hardness steel armor.Results show that even with limited number of data,FEM-ANN approach can be used to predict ballistic penetration depth with adequate accuracy.     

碳化硼基3DMC材料抗弹性能的初步探讨

通过7.62穿甲燃烧弹的射击考核,分析了碳化硼基3DMC材料的抗弹性能,发现其综合抗弹性能优于等厚度的某型号装甲钢,并具有抗击连续打击的能力,认为该材料可以独立用于装甲防护。     

钢管约束混凝土抗多发打击试验

为研究钢管约束混凝土抗多发打击性能,进行了12.7 mm穿甲弹多发打击钢管约束混凝土厚靶试验,得到靶的损伤模式和侵彻深度,并建立重复打击侵彻深度预测公式。结果表明:厚度为300 mm的小直径钢管约束混凝土靶能够有效防御3发12.7 mm穿甲弹的重复打击,第二、第三发较前一发侵彻深度的增幅分别小于20%和10%;重复打击侵彻深度预测公式与试验吻合较好。研究结果可为钢管约束混凝土防枪弹结构和遮弹层结构的研究提供参考。     

穿甲弹对自行火炮易损性分析与计算

分析了自行火炮在穿甲弹作用下的易损性,建立了自行火炮易损性计算模型,并以某型自行火炮为例,分别计算了该炮在120mm穿甲弹正面命中与侧面命中时的毁伤概率。     

穿甲子弹偏心入射陶瓷/钢复合靶板试验

设计并进行了7.62mm穿甲子弹侵彻陶瓷/低碳钢复合靶板的弹道试验,得到了极限速度及陶瓷锥底部半径等数据。分析了锥底半径与入射速度、面板及背板厚度的关系,着重分析了偏心入射时靶板的抗弹机理。结果表明:陶瓷锥可分为破碎区和粉碎区,粉碎区半径约为面板厚度与弹丸半径之和;当弹着点距离陶瓷面板边缘大于5mm时,靶板的抗弹性能变化不大,而弹着点位于距陶瓷面板边缘小于5mm的板边区时,抗弹性能明显降低,靶板的有效防护面积应扣除板边区。     

激光辐照下45#钢板响应特性

采取实验和数值模拟相结合的方法对激光辐照45#钢板的响应特性进行研究。基于连续光纤激光发射系统,开展钢板的激光辐照实验,得到温度场分布及靶板的烧蚀穿孔特性;基于ANSYS建立靶板有限元模型,模拟激光辐照下靶板的热响应过程,得到了靶板厚度、激光功率和光斑直径等因素对靶板温度分布及靶板穿孔特性的影响规律。     

不同截面形状复合长杆弹对陶瓷复合靶板侵彻研究

采用数值模拟技术研究了由3种不同截面形状的钨芯外包覆一层钢,形成的钢包覆层复合长杆弹在入射速度为1200m/s～1700m/s时对陶瓷/金属复合靶板的侵彻过程。结果表明:对于同一入射速度、相同弹体长度、同种材料的弹芯和包覆层以及靶板材料而言,等面积的六边形截面钨芯复合长杆弹的侵彻深度明显大于圆形及方形截面,方形及六边形截面与和它们等外接圆形成的圆形截面复合长杆弹侵彻深度没有明显差别,本研究认为这是与不同截面钨芯的外接圆直径直接相关。六边形截面长杆弹侵彻过程中的自锐化现象是其侵彻深度明显大于其它两种弹体的主要原因。     

Experimental and numerical investigations of interface properties of Ti6Al4V/CP-Ti/Copper composite plate prepared by explosive welding

Explosive welding technique is widely used in many industries. This technique is useful to weld different kinds of metal alloys that are not easily welded by any other welding methods. Interlayer plays an important role to improve the welding quality and control energy loss during the collision process. In this paper, the Ti6Al4V plate was welded with a copper plate in the presence of a commercially pure titanium interlayer. Microstructure details of welded composite plate were observed through optical and scanning electron microscope. Interlayer-base plate interface morphology showed a wavy structure with solid melted regions inside the vortices. Moreover, the energy dispersive spectroscopy analysis in the interlayer-base interface reveals that there are some identified regions of different kinds of chemical equilibrium phases of Cu–Ti, i.e. CuTi, Cu₂Ti, CuTi₂, Cu₄Ti, etc. To study the mechanical properties of composite plates, mechanical tests were conducted, including the tensile test, bending test, shear test and Vickers hardness test. Numerical simulation of explosive welding process was performed with coupled Smooth Particle Hydrodynamic method, Euler and Arbitrary Lagrangian-Eulerian method. The multi-physics process of explosive welding, including detonation, jetting and interface morphology, was observed with simulation. Moreover, simulated plastic strain, temperature and pressure profiles were analysed to understand the welding conditions. Simulated results show that the interlayer base plate interface was created due to the high plastic deformation and localized melting of the parent plates. At the collision point, both alloys behave like fluids, resulting in the formation of a wavy morphology with vortices, which is in good agreement with the experimental results.     

超声激励条件下微裂纹生热的有限元分析及试验研究

为解决现行装甲装备裂纹检测手段效率低、输出结果不直观等问题,将超声红外热波检测技术引入装甲装备零部件缺陷鉴定环节。针对装甲板等平板类结构的厚度特点,建立了厚度9～13121m的含微裂纹铝合金平板试件有限元分析模型,通过不同厚度试件微裂纹生热及裂纹面相对运动频谱的对比,揭示了微裂纹生热机理及其与试件厚度之间的关系。最后,通过试验验证了采用有限元分析的可行性。     

Effect of fusion welding processes on tensile properties of armor grade,high thickness,non-heat treatable aluminium alloy joints

AA5059 is one of the high strength armor grade aluminium alloy that finds its applications in the military vehicles due to the higher resistance against the armor piercing (AP) threats. This study aimed at finding the best suitable process among the fusion welding processes such as gas tungsten arc welding (GTAW) and gas metal arc welding (GMAW) by evaluating the tensile properties of AA5059 aluminium alloy joints. The fracture path was identified by mapping the low hardness distribution profile (LHDP) across the weld cross section under tensile loading. Optical and scanning electron microscopies were used to characterize the microstructural features of the welded joints at various zones. It is evident from the results that GTAW joints showed superior tensile properties compared to GMAW joints and this is primarily owing to the presence of finer grains in the weld metal zone (WMZ) and narrow heat-affected zone (HAZ). The lower heat input associated with the GTAW process effectively reduced the size of the WMZ and HAZ compared to GMAW process. Lower heat input of GTAW process results in faster cooling rate which hinders the grain growth and reduces the evaporation of magnesium in weld metal compared to GMAW joints. The fracture surface of GTAW joint consists of more dimples than GMAW joints which is an indication that the GTAW joint possess improved ductility than GMAW joint.     

含孔洞铜板复合材料修复疲劳寿命数值分析

用ANSYS有限元软件对复合材料修复含中心圆孔钢板的疲劳寿命进行了数值分析。研究了孔洞大小、补片长度、宽度和厚度对钢板疲劳寿命的影响;分析了复合材料胶接修补的效果,并对修复所用的复合材料补片的大小及厚度进行了优化设计。研究结果表明,利用复合材料胶接修补带中心圆孔的钢板可以使其疲劳性能提高1.6~18倍。修补时,增加补片宽度和厚度都可增加结构疲劳寿命;补片宽度为孔径8倍以上时,增加宽度对疲劳寿命影响不大;补片的长度为孔径的3~4倍时,修复效果最佳。     

Damage of multi-layer spaced metallic target plates impacted by radial layered PELE

Three different kinds of PELE (the penetrator with lateral efficiency) were launched by ballistic artillery to impact the multi-layer spaced metal target plates. The impact velocities of the projectiles were measured by the velocity measuring system. The damage degree and process of each layer of target plate impacted by the three kinds of projectiles were analyzed. The experimental results show that all the three kinds of projectiles have the effect of expanding holes on the multi-layer spaced metal target plates. For the normal structure PELE(without layered) with tungsten alloy jacket and the radial layered PELE with tungsten alloy jacket, the diameters of holes on the second layer of plates are 3.36 times and 3.76 times of the diameter of the projectile, respectively. For radial layered PELE with W/Zr-based amorphous composite jacket, due to the large number of tungsten wires dispersed after the impact, the diameter of the holes on the four-layer spaced plates can reach 2.4 times, 3.04 times, 5.36 times and 2.68 times of the diameter of the projectile. Besides, the normal structure PELE with tungsten alloy jacket and the radial layered PELE whit tungsten alloy jacket formed a large number of fragments impact marks on the third target plate. Although the number of fragments penetrating the third target plate is not as large as that of the normal structure PELE, the area of dispersion of fragments impact craters on the third target plate is larger by the radial layered PELE. The radial layered PELE with W/Zr-based amorphous composite jacket released a lot of heat energy due to the impact of the matrix material, and formed a large area of ablation marks on the last three target plates.     

Fabrication of AA7005/TiB2-B4C surface composite by friction stir processing: Evaluation of ballistic behaviour

The present work aims to enhance the ballistic resistance of AA7005 alloy by incorporating the TiB₂ and B₄C ceramic reinforcement particles. Surface composites with different weight fractions of TiB₂ and B₄C particles were processed by friction stir processing. Micro-hardness and depth of penetration tests were carried out to evaluate the ballistic properties of the surface composites. The surface hardness of the composite was found to be nearly 70 HV higher than base alloy. The depth of penetration of the steel projectile was 20–26 mm in the composites as compared to 37 mm in the base alloy. Ballistic mass efficiency factor of the surface composite was found to be 1.6 times higher than base alloy. This is mainly attributed to the dispersion strengthening from the reinforcement particles.     

Statistical variability and fragility assessment of ballistic perforation of steel plates for 7.62 mm AP ammunition

The paper describes field test results of 7.62 × 51 mm M61 AP (armour piercing) ammunition fired into mild steel targets at an outdoor range. The targets varied from 10 mm to 32 mm in thickness. The tests recorded penetration depth, probability of perforation (i.e., complete penetration), muzzle and impact velocities, bullet mass, and plate yield strength and hardness. The measured penetration depth exhibited a variability of approximately ±12%. The paper then compared ballistic test results with predictive models of steel penetration depth and thickness to prevent perforation. Statistical parameters were derived for muzzle and impact velocity, bullet mass, plate thickness, plate hardness, and model error. A Monte-Carlo probabilistic analysis was then developed to estimate the probability of plate perforation of 7.62 mm M61 AP ammunition for a range of impact velocities, and for mild steels, and High Hardness Armour (HHA) plates. This perforation fragility analysis considered the random variability of impact velocity, bullet mass, plate thickness, plate hardness, and model error. Such a probabilistic analysis allows for reliability-based design, where, for example, the plate thickness with 95% reliability (i.e. only 1 in 20 shots will penetrate the wall) can be estimated knowing the probabilistic distribution of perforation. Hence, it was found that the plate thickness to ensure a low 5% probability of perforation needs to be 11–15% thicker than required to have a 50/50 chance of perforation for mild steel plates. Plates would need to be 20–30% thicker if probability of perforation is reduced to zero.