DSSS时变窄带干扰抑制算法研究

在传统非线性最小二乘(NLS)算法的基础上,提出一种基于线谱估计的直接序列扩频(DSSS)系统抑制窄带干扰(NBI)的方法。该算法首先通过对基于正弦波叠加模型的NBI进行频率估计,再利用最小二乘准则进行自适应滤波,恢复出干扰信号包络,从而利用干扰对消器将其从观测数据中消除。仿真验证表明,本算法相对于传统的最小均方误差(LMS)算法、自适应频域陷波法,能较好地抑制时变音频NBI模型的干扰,且信息量损失较小。     

正弦高斯组合的UWB脉冲波形设计

针对美国FCC关于超宽带传输系统提出的辐射掩蔽特性,提出了一种基于正弦高斯组合的UWB脉冲波形设计新方案。以一组正弦高斯脉冲为基函数,利用最小均方误差准则(LSE)选取加权系数对基函数进行线性组合,通过调整基函数的载波频率和脉冲形成因子,对波形进一步优化。分析了TH-PPM UWB多用户系统的误码率性能。仿真结果表明,与高斯二阶微分脉冲、随机系数组合脉冲相比,基于正弦高斯组合脉冲具有更高的频谱利用率,误码性能更优。     

基于正弦高斯组合的UWB脉冲波形设计

针对美国FCC关于超宽带传输系统提出的辐射掩蔽特性,提出了一种基于正弦高斯组合的UWB脉冲波形设计新方案。以一组正弦高斯脉冲为基函数,利用最小均方误差准则(LSE)选取加权系数对基函数进行线性组合,通过调整基函数的载波频率和脉冲形成因子,对波形进一步优化。分析了TH-PPM UWB多用户系统的误码率性能。仿真结果表明,与高斯二阶微分脉冲、随机系数组合脉冲相比,基于正弦高斯组合脉冲具有更高的频谱利用率,误码性能更优。     

基于S变换的跳频信号参数估计

对跳频信号的时频域进行分析和参数估计是识别、跟踪及干扰跳频信号的重要基础。针对接收到的未知任何先验参数的跳频信号,提出了一种基于S变换(S-transform)的跳频信号参数估计算法,通过S变换,能正确估计出跳频信号的跳频周期、跳变时刻及跳频图案。仿真结果表明,与平滑伪Wigner-Ville分布(SPWVD)进行比较,该算法能够在低信噪比条件下,在时频域中有较好的解析能力,提高了跳频信号参数估计的准确性。     

动态灰色时序系统 DGTS 及其在安全策略规范中的应用

设计安全策略模型时应考虑安全策略的时序特性和灰色特性,还应综合考虑保密性、完整性和可用性三方面的需求。已有的安全模型没有描述时序性和灰色特性,而且一般只侧重描述保密性或完整性。为此,本文提出了动态灰色时序系统（简称ＤＧＴＳ）。本文详细描述了ＤＧＴＳ,以及基于ＤＧＴＳ的动态语义设计的灰色时序安全策略规范语言ＧＴＳＬ。     

A novel noise reduction technique for underwater acoustic signals based on complete ensemble empirical mode decomposition with adaptive noise,minimum mean square variance criterion and least mean square adaptive filter

Underwater acoustic signal processing is one of the research hotspots in underwater acoustics. Noise reduction of underwater acoustic signals is the key to underwater acoustic signal processing. Owing to the complexity of marine environment and the particularity of underwater acoustic channel, noise reduction of underwater acoustic signals has always been a difficult challenge in the field of underwater acoustic signal processing. In order to solve the dilemma, we proposed a novel noise reduction technique for underwater acoustic signals based on complete ensemble empirical mode decomposition with adaptive noise (CEEMDAN), minimum mean square variance criterion (MMSVC) and least mean square adaptive filter (LMSAF). This noise reduction technique, named CEEMDAN-MMSVC-LMSAF, has three main advantages: (i) as an improved algorithm of empirical mode decomposition (EMD) and ensemble EMD (EEMD), CEEMDAN can better suppress mode mixing, and can avoid selecting the number of decomposition in variational mode decomposition (VMD); (ii) MMSVC can identify noisy intrinsic mode function (IMF), and can avoid selecting thresholds of different permutation entropies; (iii) for noise reduction of noisy IMFs, LMSAF overcomes the selection of decomposition number and basis function for wavelet noise reduction. Firstly, CEEMDAN decomposes the original signal into IMFs, which can be divided into noisy IMFs and real IMFs. Then, MMSVC and LMSAF are used to detect identify noisy IMFs and remove noise components from noisy IMFs. Finally, both denoised noisy IMFs and real IMFs are reconstructed and the final denoised signal is obtained. Compared with other noise reduction techniques, the validity of CEEMDAN-MMSVC-LMSAF can be proved by the analysis of simulation signals and real underwater acoustic signals, which has the better noise reduction effect and has practical application value. CEEMDAN-MMSVC-LMSAF also provides a reliable basis for the detection, feature extraction, classification and recognition of underwater acoustic signals.     

运载火箭随机振动环境试验条件的变带宽设计方法

针对运载火箭随机振动环境试验条件提出了基于能量等效思想的变带宽设计方法,通过采用分数倍频程数据处理方法,并确保各个频带内的均方根值与原随机振动环境的均方根值相同,有效解决传统的等带宽随机振动环境试验条件总均方根过高的问题。为了验证所提方法的有效性,通过典型管路产品进行了随机振动响应计算。结果表明,该方法既能够有效地对产品进行考核,又不至于对产品造成过考核。所提变带宽设计方法可为运载火箭随机振动环境条件的合理设计与分析提供有效手段。     

基于逆合成孔径成像激光雷达的自旋小目标成像系统

为了获得毫米级自旋小目标的清晰成像,采用逆合成孔径成像激光雷达技术设计了基于距离向数据与方位向数据相融合的图像重建系统。系统采用大带宽、窄线宽光纤激光器配合调制器实现激光脉冲的线性调频,利用光外差原理对回波信号进行采集处理。结合自旋目标的运动特性,给出了含有自旋分量的回波信号函数方程,并将该分量引入传统的R-D算法中实现了对自旋目标的ISAIL二维图像的重建。实验采用毫米级铝条构成被测小目标,通过步进电机及带倾角的转台完成运动及自旋模拟。实验结果显示,当目标固定时,可通过回波能量数据获得一维距离向图像,与被测目标的4个特征点位置一致。当目标运动时,通过数据压缩并代入自旋参量,最后通过R-D算法可以获得可识别的ISAIL二维图像,验证了系统符合自旋小目标成像的设计要求。     

激光陀螺数字抖动控制方法与特性

针对传统的模拟抖动控制系统体积大、灵活性差的缺点,设计了一种基于单片机的新的激光陀螺数字抖动控制方法,建立了陀螺抖动的数学模型,比较研究了传统的模拟正弦波驱动和新的数字方波驱动的抖动特性,指出了后者不同于前者的抖幅变化律及非线性的随机噪声注入方式。仿真和实验证明,该方法能很好满足激光陀螺抖动控制要求,保证陀螺性能。     

Dynamic signatures and their use in comparing the reliability of new and used systems

The signature of a system with independent and identically distributed (i.i.d.) component lifetimes is a vector whose ith element is the probability that the ith component failure is fatal to the system. System signatures have been found to be quite useful tools in the study and comparison of engineered systems. In this article, the theory of system signatures is extended to versions of signatures applicable in dynamic reliability settings. It is shown that, when a working used system is inspected at time t and it is noted that precisely k failures have occurred, the vector s [0,1]^n‐k whose jth element is the probability that the (k + j)th component failure is fatal to the system, for j = 1,2,2026;,n ‐ k, is a distribution‐free measure of the design of the residual system. Next, known representation and preservation theorems for system signatures are generalized to dynamic versions. Two additional applications of dynamic signatures are studied in detail. The well‐known “new better than used” (NBU) property of aging systems is extended to a uniform (UNBU) version, which compares systems when new and when used, conditional on the known number of failures. Sufficient conditions are given for a system to have the UNBU property. The application of dynamic signatures to the engineering practice of “burn‐in” is also treated. Specifically, we consider the comparison of new systems with working used systems burned‐in to a given ordered component failure time. In a reliability economics framework, we illustrate how one might compare a new system to one successfully burned‐in to the kth component failure, and we identify circumstances in which burn‐in is inferior (or is superior) to the fielding of a new system. © 2009 Wiley Periodicals, Inc. Naval Research Logistics, 2009     

基于改进人工蜂群算法的漏磁缺陷轮廓重构

漏磁缺陷重构是指由检测到的漏磁信号重构缺陷轮廓及参数,是实现漏磁反演的关键。将局部最优解和全局最优解引入到人工蜂群算法(Artificial Bee Colony Algorithm,ABC)中,提出了一种基于改进人工蜂群算法的缺陷重构模型。在该模型中,径向基函数神经网络作为前向模型求解漏磁信号,改进人工蜂群算法用于求解反演问题中的优化问题。将改进人工蜂群算法和基本人工蜂群算法作为反演算法进行了比较,实验结果表明,改进人工蜂群反演算法精度较高,速度较快,同时对实测信号具有鲁棒性,是一种有效可行的漏磁反演新方法。     

基于改进ACO算法的多UAV协同航路规划

针对无人机(Unmanned Aerial Vehicle,UAV)在执行任务过程中遇到的诸如敌方防空火力、地形障碍及恶略天气等各类威胁源,采用威胁源概率分布的方法进行威胁的量化处理,构建任务空间的威胁概率密度分布图,有效消除了威胁源的差异性。根据UAV在任务飞行过程中的性能约束与时、空协同约束,同时考虑任务过程中UAV的损毁概率最小、任务航程最短,构建了相应的综合任务航路代价最优化目标函数。结合传统蚁群优化算法(Ant Colony Optimization,ACO)在解决此类问题中的不足,给出了相应的改进策略,提出采用协同多种群ACO进化策略来实现多UAV在满足时、空协同约束下的协同航路规划。通过相应的仿真计算表明,改进后的ACO协同多种群进化策略算法更适用于多UAV协同任务航路规划问题,具有一定的实用性。从而为多UAV协同任务航路规划问题的求解提供了科学的决策依据。     

DETECTION OF TRANSIENT SIGNAL USING THE DISCRETE WAVELET TRANSFORM

ＤＥＴＥＣＴＩＯＮＯＦＴＲＡＮＳＩＥＮＴＳＩＧＮＡＬＵＳＩＮＧＴＨＥＤＩＳＣＲＥＴＥＷＡＶＥＬＥＴＴＲＡＮＳＦＯＲＭＬｉｕＺｈｅｎｇ（ＤｅｐａｒｔｍｅｎｔｏｆＩｎｆｏｒｍａｔｉｏｎＥｌｅｃｔｒｏｎｉｃｓ,ＦａｃｕｌｔｙｏｆＥｎｇｉｎｅｅｒｉｎｇ,Ｎａ...     

层次分析法在舰船作战能力分析中应用

舰载武器系统作战能力评估与分析是海军现代化建设研究领域的一个重要课题,通过对不同武器配置的作战能力的评估与分析可以检验武器配置是否优化合理,研究的着眼点就是探索能够最真实检验一种武器配置方案是否能够最大限度地满足作战能力的评估的各项指标。文中采用层次分析理论（ＡｎｅｌｙｔｉｃＨｉｅｒａｎｄｙＰｒｏｃｅｓｓ）,简称ＡＨＰ方法,引进科学评估方法,所有基本指数由专家确定,并对专家的判断进行一致性检验和最小偏差处理,理论与经验相结合,使最终的指数最大限度地符合现实,其评价体系是直观的,易被军事人员接受。     

Research on simultaneous localization and mapping for AUV by an improved method: Variance reduction FastSLAM with simulated annealing

At present, simultaneous localization and mapping (SLAM) for an autonomous underwater vehicle (AUV) is a research hotspot. Aiming at the problem of non-linear model and non-Gaussian noise in AUV motion, an improved method of variance reduction fast simultaneous localization and mapping (FastSLAM) with simulated annealing is proposed to solve the problems of particle degradation, particle depletion and particle loss in traditional FastSLAM, which lead to the reduction of AUV location estimation accuracy. The adaptive exponential fading factor is generated by the anneal function of simulated annealing algorithm to improve the effective particle number and replace resampling. By increasing the weight of small particles and decreasing the weight of large particles, the variance of particle weight can be reduced, the number of effective particles can be increased, and the accuracy of AUV location and feature location estimation can be improved to some extent by retaining more information carried by particles. The experimental results based on trial data show that the proposed simulated annealing variance reduction FastSLAM method avoids particle degradation, maintains the diversity of particles, weakened the degeneracy and improves the accuracy and stability of AUV navigation and localization system.     

直达波和杂波干扰下目标阴影逆合成孔径成像

对直达波和杂波条件下的阴影逆合成孔径雷达(SISAR)目标成像问题进行了研究。分析了直达波和杂波对侧影像畸变和运动补偿的影响,提出了一种新的直达波和杂波干扰下目标SI-SAR成像方法,即将回波信号与参考信号进行模拟对消,并利用目标回波的频谱特性剔除残留直达波,再对目标运动参数进行粗估计,采用粗搜索和精搜索2步实施准确的运动补偿,最终获得失真度较小的目标侧影像。仿真实验验证了算法的有效性。     

Optimal design of a novel cylindrical sandwich panel with double arrow auxetic core under air blast loading

The increasing threat of explosions on the battle field and the terrorist action requires the development of more effective blast resistance materials and structures. Curved structure can support the external loads effectively by virtue of their spatial curvature. In review of the excellent energy absorption property of auxetic structure, employing auxetic structure as core material in curved sandwich shows the potential to improve the protection performance. In this study, a novel cylindrical sandwich panel with double arrow auxetic (DAA) core was designed and the numerical model was built by ABAQUS. Due to the complexity of the structure, systematic parameter study and optimal design are conducted. Two cases of optimal design were considered, case1 focuses on reducing the deflection and mass of the structure, while case2 focuses on reducing the deflection and increasing the energy absorption per unit mass. Parameter study and optimal design were conducted based on Latin Hypercube Sampling (LHD) method, artificial neural networks (ANN) metamodel and the nondominated sorting genetic algorithm (NSGA-Ⅱ). The Pareto front was obtained and the cylindrical DAA structure performed much better than its equal solid panel in both blast resistance and energy absorption capacity. Optimization results can be used as a reference for different applications.     

规整化SAR图像特征提取

SAR成像算法通常都基于FFT运算,图像分辨率要受到瑞利限的制约。为了提高图像分辨率,目前常用的SAR/ISAR超分辨成像算法大多借助于现代谱估计技术。从解方程的角度考虑,认为有限长数据的高分辨率谱估计是一个欠定方程问题,估计的结果存在"病态"性。在Bayes估计准则下,把信号谱的先验概率密度作为规整项包含进信号频谱的最大后验概率估计中,提高谱估计的分辨率。将这种方法用于SAR图像峰值特征提取,提高了图像分辨率。     

雷达天线扫描方式的自动识别方法

为了对雷达天线扫描方式进行自动识别,改进开发了天线扫描方式模拟器,并分别研究了电子扫描和机械扫描的特征提取和识别方法。基于最大主瓣脉冲序列的特征参数实现电子扫描和机械扫描的区分,然后基于单个天线扫描周期脉冲序列的特征参数实现8种机械扫描方式的自动识别。仿真结果表明,本文方法能够区分一维电扫、二维电扫和机械扫描,并且采用支持向量机决策树对机械扫描方式的识别正确率高于决策树方法。     

An INS/GNSS integrated navigation in GNSS denied environment using recurrent neural network

In view of the failure of GNSS signals, this paper proposes an INS/GNSS integrated navigation method based on the recurrent neural network (RNN). This proposed method utilizes the calculation principle of INS and the memory function of the RNN to estimate the errors of the INS, thereby obtaining a continuous, reliable and high-precision navigation solution. The performance of the proposed method is firstly demonstrated using an INS/GNSS simulation environment. Subsequently, an experimental test on boat is also conducted to validate the performance of the method. The results show a promising application prospect for RNN in the field of positioning for INS/GNSS integrated navigation in the absence of GNSS signal, as it outperforms extreme learning machine (ELM) and EKF by approximately 30% and 60%, respectively.