填充式波纹夹层结构超高速撞击特性仿真

基于航天器空间碎片被动防护需求,对一种新型填充式波纹夹层结构进行超高速撞击仿真研究,分析超高速撞击过程以及结构的穿孔破坏情况和所形成的碎片云的特性,并与相同面密度Whipple结构进行对比。其撞击现象与Whipple结构相似,但其碎片云的头部速度小于Whipple结构,而径向膨胀最大速度和膨胀半角均大于Whipple结构。随撞击初速从3 km/s~10 km/s不断增大,波纹夹层结构的撞击穿孔尺寸变大,形状也更不规则。此外,结构中的填充树脂对碎片撞击能量的吸收贡献最大,后面板所吸收的能量所占比重较大,而前面板和波纹板对碎片撞击能量的吸收贡献较小。研究结果对空间碎片防护结构的设计具有一定的参考意义。     

Characteristics structure analysis on debris cloud in the hypervelocity impact of disk projectile on thin plate

In this paper, the gauge points setting is introduced in the SPH simulation to analyze the debris cloud structure generated by the hypervelocity impact of disk projectile on thin plate. Compared with the experiments, more detailed information of the debris cloud structure can be classified from the numerical simulation. However, due to the solitary dispersion and overlap display of the particles in the SPH simulation, accurate comparison between numerical and experimental results is difficult to be performed. To track the velocity and spatial distribution of the particles in the debris cloud induced from disk and plate, gauge points are locally set in the single-layer profile in the SPH model. By analyzing the gauge points’ spatial coordinate and velocity, the location and velocity of characteristic points in the debris cloud are determined. The boundary of debris cloud is achieved, as well as the fragments distribution outside the main structure of debris cloud.     

高速/超高速碰撞效应研究

高速/超高速碰撞会产生大量破片,并伴随闪光、等离子体等现象.高速碰撞材料受冲击产生射流及破片高温会引起碰撞闪光现象,获得了碰撞等离子体电磁场强度的变化规律.采用数值仿真与理论分析相结合的方法,获得了高速碰撞破片云团分布规律.     

Analysis of the stress wave and rarefaction wave produced by hypervelocity impact of sphere onto thin plate

Shock wave is emitted into the plate and sphere when a sphere hypervelocity impacts onto a thin plate. The fragmentation and phase change of the material caused by the propagation and unloading of shock wave could result in the formation of debris cloud eventually. Propagation models are deduced based on one-dimensional shock wave theory and the geometry of sphere, which uses elliptic equations (corresponding to ellipsoid equations in physical space) to describe the propagation of shock wave and the rarefaction wave. The “Effective thickness” is defined as the critical plate thickness that ensures the rarefaction wave overtake the shock wave at the back of the sphere. The “Effective thickness” is directly related to the form of the debris cloud. The relation of the “Effective thickness” and the “Optimum thickness” is also discussed. The impacts of Al spheres onto Al plates are simulated within SPH to verify the propagation models and associated theories. The results show that the wave fronts predicted by the propagation models are closer to the simulation result at higher impact velocity. The curvatures of the wave fronts decrease with the increase of impact velocities. The predicted “Effective thickness” is consistent with the simulation results. The analysis about the shock wave propagation and unloading in this paper can provide a new sight and inspiration for the quantitative study of hypervelocity impact and space debris protection.     

SPH算法在超高速碰撞数值模拟中的应用

采用大型动力学软件Ls-dyna中的SPH求解器,对球形弹丸超高速碰撞靶板的过程进行数值模拟。给出由于碰撞速度不同,而引起的不同的碎片云图像,以及不同的靶板破碎孔的尺寸。同时模拟了入射角度不同,而得到不同的超高速碰撞物理过程。初步分析结果表明数值模拟结果是合理的,较清晰地模拟了超高速碰撞下碎片云的生成、膨胀过程。另外,通过数值模拟结果与实验结果的比较分析,表明SPH方法得到的结果能描述相应的超高速碰撞现象。所以采用SPH算法针对超高速碰撞物理过程进行数值模拟是可行的。     

Investigation on the spatial distribution characteristics of behind-armor debris formed by the perforation of EFP through steel target

The behind-armor debris (BAD) formed by the perforation of an EFP is the main damage factor for the secondary destruction to the behind-armor components. Aiming at investigating the BAD caused by EFP, flash X-ray radiography combined with an experimental witness plate test method was used, and the FEM-SPH adaptive conversion algorithm in LS-DYNA software was employed to model the perforation process. The simulation results of the debris cloud shape and number of debris were in good agreement with the flash X-ray radiographs and perforated holes on the witness plate, respectively. Three-dimensional numerical simulations of EFP's penetration under various impact conditions were conducted. The results show that, an ellipsoidal debris cloud, with the major-to-minor axis radio (a/b) smaller than that caused by shaped charge jets, was formed behind the target. With the increase of target thickness (h) and decrease of impact velocity (v₀) and obliquity (θ), the value of a/b decreases. The number of debris ejected from target is significantly higher than that from EFP. Based on the statistical analysis of the spatial distribution of the BAD, An engineering calculation model was established considering the influence of h, v₀ and θ. The model can with reasonable accuracy predict the quantity and velocity distribution characteristics of BAD formed by EFP.     

爆炸成型弹丸贯穿靶板靶后破片空间分布模型

深空撞击载荷对探测小天体内部物质成分和结构特性具有重要意义,因此,在考虑爆炸成型弹丸(explosively formed projectile, EFP)可变截面的特性和区分靶后破片来源的基础上,建立了EFP贯穿靶板靶后破片空间分布模型。在靶板厚度30 mm至70 mm、EFP着靶速度1 650 m/s至1 860 m/s的条件下,该模型可以定量预测靶后破片云中各个破片的速度、质量、数量与空间位置的关系。结果表明,相对速度总是随相对空间位置的增加而呈线性增加,相对质量、相对数量总是随相对空间位置的增加而呈幂函数增加。     

空间碎片碰撞风险评估模型及其应用

以现有的空间碎片环境模型为基础,建立了一套空间碎片风险评估模型。该模型包括空间碎片环境、航天器有限元建模、几何遮挡处理以及碰撞概率计算四个模块。为了验证风险评估模型的精度及有效性,针对机构间空间碎片协调委员会指定的三种标准工况,将该计算结果与国内外已有的风险评估模型的计算结果进行比较,验证了风险评估模型的正确性。利用开发的风险评估模型,对立方体航天器遭遇空间碎片碰撞风险进行仿真评估与分析,给出了轨道高度、倾角以及航天器自身的姿态参数对航天器遭遇空间碎片碰撞风险的影响特性。     

应用地面电磁发射清除空间碎片方法

针对传统化学发射的空间碎片清除技术成本过高、难以实施的问题,提出应用地基电磁发射方式的空间碎片清除新方法。通过地面电磁发射的方式以低成本将射弹运送至空间,并通过释放空间微粒云团控制空间碎片离轨,进而实现对空间碎片的清除。由于取消使用占绝大部分成本的化学推进剂,所提出的应用地基电磁发射的空间碎片清除技术为空间碎片低成本清除提供了有效解决途径。     

Survivability assessment of spacecraft impacted by orbit debris

To help optimize the spacecraft design and reduce the risk of spacecraft mission failure, a new approach to assess the survivability of spacecraft in orbit is presented here, including the following three steps:1) Sensitivity Analysis of spacecraft. A new sensitivity analysis method, a ray method based on virtual outer wall, is presented here. Using rays to simulate the debris cloud can effectively address the component shadowing issues. 2) Component Vulnerability analysis of spacecraft. A function"Component functional reduction degree — Component physical damage degree"is provided here to clearly describe the component functional reduction. 3) System-level Survivability Assessment of spacecraft. A new method based on expert knowledge reasoning, instead of traditional artificial failure tree method, is presented here to greatly improve the efficiency and accuracy of calculation.     

基于ABM方法的空间碎片网捕体系结构建模

空间碎片网捕是一种新型的空间碎片清理方式。首先介绍了基于活动的建模方法(ABM)以及进行体系结构建模的流程,之后基于系统的基本工作流程,使用System Architect软件对空间碎片网捕任务的体系结构进行了可视化建模,得到了典型的作战视图,并进行了任务流程的仿真;对理解空间目标网捕系统的功能、研究空间碎片网捕任务的流程,提出系统构建需求具有一定的参考价值。。     

抗超高速撞击多层结构复合材料研究

本文介绍了抗超高速撞击多层结构复合材料的设计、制备和实验,并对结果进行了讨论,实验证明,以SiC陶瓷基复合材料为防护层、以空心微珠或多孔变密度复合材料为缓冲层、以编织物复合材料为结构层的多层结构复合材料,具有面密度低、抗撞击速度范围宽、抗撞击性能好的特点。     

电磁轨道炮电感梯度影响因素分析

利用Ansoft Maxwell 14.0有限元分析软件,在考虑和不考虑电枢2种情况下对简单电磁轨道炮电感梯度的影响作对比分析,得出计算电感梯度时有必要将电枢的影响考虑进去的结论.为提高增强型轨道炮的电感梯度,分析不同轨道间距、厚度以及不同炮口宽度对2种增强型轨道炮电感梯度的影响,得出电感梯度随轨道参数变化的规律.     

一种云计算中的身份认证协议

针对当前在云计算中身份认证机制个人信息容易泄漏的问题,提出了一种云计算中的身份认证协议。协议的安全性是基于离散对数的难解问题。协议模型由用户、云服务提供者和注册实体等三个实体组成;通过先属性注册协议、后身份认证协议两个步骤完成整个认证过程;从用户伪装身份和云服务提供者盗取身份信息两个角度,对协议的安全性进行了分析;通过与云计算中基于公钥生成器的协议进行对比以及实验仿真,证明了该协议在对承诺的注册和认证时间上的优越性。     

有线控制飞行器群脉冲耦合效应及加固方法研究

飞行器在飞行状态时，控制导线在电快速瞬变脉冲群（EFT）作用下，该设备控制指令将会出现控制状态错误翻转、持续无指令输出等故障，产生故障的机理是电磁脉冲（EMP）通过传导方式进入控制箱产生紊乱的回输信号所致，严重时会损坏控制器及起飞装置。在实验基础上，研究了飞行器控制导线对电磁脉冲的防护加固方法，研究结果表明，对控制导线采取屏蔽法能够使飞行器对电磁脉冲具有很好的防护效果。     

Numerical investigation of the shockwave overpressure fields of multi-sources FAE explosions

Shockwaves from fuel-air explosive (FAE) cloud explosions may cause significant casualties. The ground overpressure field is usually used to evaluate the damage range of explosion shockwaves. In this paper, a finite element model of multi-sources FAE explosion is established to simulate the process of multiple shockwaves propagation and interaction. The model is verified with the experimental data of a fourfold-source FAE explosion, with the total fuel mass of 340 kg. Simulation results show that the overpressure fields of multi-sources FAE explosions are different from that of the single-source. In the case of multi-sources, the overpressure fields are influenced significantly by source scattering distance and source number. Subsequently, damage ranges of overpressure under three different levels are calculated. Within a suitable source scattering distance, the damage range of multi-sources situation is greater than that of the single-source, under the same amount of total fuel mass. This research provides a basis for personnel shockwave protection from multi-sources FAE explosion.     

金属靶体材料动力硬度测试及动态阻力分析

以高速侵彻下45钢靶体侵彻阻力为研究对象,开展了弹体高速侵彻45钢靶体试验,获取了典型弹体对45钢靶体的成坑参数。基于高速侵彻阻力模型对靶体侵彻阻力及影响因素进行分析。结合流体动力学侵彻模型对不同弹体材料侵彻45钢靶体侵彻深度规律进行研究。研究结果表明:随着撞击速度的增大,45钢的靶体阻力从5. 13 GPa减小到3. 7 GPa;基于材料动力硬度测试方法的靶体动态阻力测试结果和理论计算结果吻合较好;随着靶体动态屈服强度的增大,靶体阻力呈线性增大的趋势;侵彻深度及靶体动态阻力理论计算结果和试验数据吻合较好,说明所提动态阻力确定方法可行,可为高速侵彻动力学研究提供参考。     

云重心评判法的防空兵C4ISR系统生存能力效能评估

指挥自动化系统是军队现代化的重要组成部分,高质量的指挥自动化系统可以起到强大的军力倍增作用,因此其效能评估研究越来越受到人们的重视.结合实战情况,确立了防空兵C4ISR系统生存能力指标体系,就其效能评估给出了一种综合评判法--云重心评判法,对其理论介绍的同时详细的给出了云重心评判法的实现步骤,并通过算例验证了此方法的有效性和实用性.此方法简单易行可操作性强,对指挥自动化系统的效能评估提供了有效的方法和途径.     

Data-driven prediction of plate velocities and plate deformation of explosive reactive armor

Explosive reactive armor (ERA) is currently being actively developed as a protective system for mobile devices against ballistic threats such as kinetic energy penetrators and shaped-charge jets. Considering mobility, the aim is to design a protection system with a minimal amount of required mass. The efficiency of an ERA is sensitive to the impact position and the timing of the detonation. Therefore, different designs have to be tested for several impact scenarios to identify the best design. Since analytical models are not predicting the behavior of the ERA accurately enough and experiments, as well as numerical simulations, are too time-consuming, a data-driven model to estimate the displacements and deformation of plates of an ERA system is proposed here. The ground truth for the artificial neural network (ANN) is numerical simulation results that are validated with experiments. The ANN approximates the plate positions for different materials, plate sizes, and detonation point positions with sufficient accuracy in real-time. In a future investigation, the results from the model can be used to estimate the interaction of the ERA with a given threat. Then, a measure for the effectiveness of an ERA can be calculated. Finally, an optimal ERA can be designed and analyzed for any possible impact scenario in negligible time.     

“作战云”理论视阈下的装甲兵装备保障

"作战云"的作战理念将引发装甲装备保障领域的深刻变革。文章剖析了"作战云"理论视阈下装甲兵装备保障问题的基本内涵,从装备保障力量部署、指挥控制方式、协同方式、防护手段四个方面分析了"作战云"视阈下装甲兵装备保障的主要特点,提出"探测——决策——保障——评估"的装备保障行动流程。