Pseudo-monotonic interval programming

A pseudo-monotonic interval program is a problem of maximizing f(x) subject to x ε X = {x ε Rⁿ | a < Ax < b, a, b ε R^m} where f is a pseudomonotonic function on X, the set defined by the linear interval constraints. In this paper, an algorithm to solve the above program is proposed. The algorithm is based on solving a finite number of linear interval programs whose solutions techniques are well known. These optimal solutions then yield an optimal solution of the proposed pseudo-monotonic interval program.     

The conjugate gradient technique for certain quadratic network problems

We consider a class of network flow problems with pure quadratic costs and demonstrate that the conjugate gradient technique is highly effective for large-scale versions. It is shown that finding a saddle point for the Lagrangian of an m constraint, n variable network problem requires only the solution of an unconstrained quadratic programming problem with only m variables. It is demonstrated that the number of iterations for the conjugate gradient algorithm is substantially smaller than the number of variables or constraints in the (primal) network problem. Forty quadratic minimum-cost flow problems of various sizes up to 100 nodes are solved. Solution time for the largest problems (4,950 variables and 99 linear constraints) averaged 4 seconds on the CBC Cyber 70 Model 72 computer.     

Pricing bridges to cross a river

We consider a pricing problem in directed, uncapacitated networks. Tariffs must be defined by an operator, the leader, for a subset of m arcs, the tariff arcs. Costs of all other arcs in the network are assumed to be given. There are n clients, the followers, and after the tariffs have been determined, the clients route their demands independent of each other on paths with minimal total cost. The problem is to find tariffs that maximize the operator's revenue. Motivated by applications in telecommunication networks, we consider a restricted version of this problem, assuming that each client utilizes at most one of the operator's tariff arcs. The problem is equivalent to pricing bridges that clients can use in order to cross a river. We prove that this problem is APX‐hard. Moreover, we analyze the effect of uniform pricing, proving that it yields both an m approximation and a (1 + lnD)‐approximation. Here, D is upper bounded by the total demand of all clients. In addition, we consider the problem under the additional restriction that the operator must not reject any of the clients. We prove that this problem does not admit approximation algorithms with any reasonable performance guarantee, unless P = NP, and we prove the existence of an n‐approximation algorithm. © 2007 Wiley Periodicals, Inc. Naval Research Logistics, 2007     

Computing equilibria via nonconvex programming

The problem of determining a vector that places a system in a state of equilibrium is studied with the aid of mathematical programming. The approach derives from the logical equivalence between the general equilibrium problem and the complementarity problem, the latter being explicitly concerned with finding a point in the set S = {x: < x, g(x)> = 0, g(x) ≦ 0, x ≧ 0}. An associated nonconvex program, min{? < x, g(x) > : g(x) ≦ 0, x ≧ 0}, is proposed whose solution set coincides with S. When the excess demand function g(x) meets certain separability conditions, equilibrium solutions are obtained by using an established branch and bound algorithm. Because the best upper bound is known at the outset, an independent check for convergence can be made at each iteration of the algorithm, thereby greatly increasing its efficiency. A number of examples drawn from economic and network theory are presented in order to demonstrate the computational aspects of the approach. The results appear promising for a wide range of problem sizes and types, with solutions occurring in a relatively small number of iterations.     

Maximizing the ratio of two convex functions over a convex set

The purpose of this article is to present an algorithm for globally maximizing the ratio of two convex functions f and g over a convex set X. To our knowledge, this is the first algorithm to be proposed for globally solving this problem. The algorithm uses a branch and bound search to guarantee that a global optimal solution is found. While it does not require the functions f and g to be differentiable, it does require that subgradients of g can be calculated efficiently. The main computational effort of the algorithm involves solving a sequence of subproblems that can be solved by convex programming methods. When X is polyhedral, these subproblems can be solved by linear programming procedures. Because of these properties, the algorithm offers a potentially attractive means for globally maximizing ratios of convex functions over convex sets. © 2006 Wiley Periodicals, Inc. Naval Research Logistics, 2006     

Production-allocation scheduling and capacity expansion using network flows under uncertainty

This paper extends Connors and Zangwill's work in network flows under uncertainty to the convex costs case. In this paper the extended network flow under uncertainty algorithm is applied to compute N-period production and delivery schedules of a single commodity in a two-echelon production-inventory system with convex costs and low demand items. Given an initial production capacity for N periods, the optimal production and delivery schedules for the entire N periods are characterized by the flows through paths of minimal expected discounted cost in the network As a by-product of this algorithm the multi-period stochastic version of the parametric budget problem for the two-echelon production-inventory system is solved.     

On the uncapacitated K‐commodity network design problem with zero flow‐costs

Extending Sastry's result on the uncapacitated two‐commodity network design problem, we completely characterize the optimal solution of the uncapacitated K‐commodity network design problem with zero flow costs for the case when K = 3. By solving a set of shortest‐path problems on related graphs, we show that the optimal solutions can be found in O(n³) time when K = 3, where n is the number of nodes in the network. The algorithm depends on identifying a list of “basic patterns”; the number of basic patterns grows exponentially with K. We also show that the uncapacitated K‐commodity network design problem can be solved in O(n³) time for general K if K is fixed; otherwise, the time for solving the problem is exponential. © 2004 Wiley Periodicals, Inc. Naval Research Logistics, 2004     

Algorithms for minimizing total cost,bottleneck time and bottleneck shipment in transportation problems

We consider the transportation problem of determining nonnegative shipments from a set of m warehouses with given availabilities to a set of n markets with given requirements. Three objectives are defined for each solution: (i) total cost, TC, (ii) bottleneck time, BT (i.e., maximum transportation time for a positive shipment), and (iii) bottleneck shipment, SB (i.e., total shipment over routes with bottleneck time). An algorithm is given for determining all efficient (pareto-optimal or nondominated) (TC, BT) solution pairs. The special case of this algorithm when all the unit cost coefficients are zero is shown to be the same as the algorithms for minimizing BT. provided by Szwarc and Hammer. This algorithm for minimizing BT is shown to be computationally superior. Transportation or assignment problems with m=n=100 average about a second on the UNIVAC 1108 computer (FORTRAN V)) to the threshold algorithm for minimizing BT. The algorithm is then extended to provide not only all the efficient (TC, BT) solution pairs but also, for each such BT, all the efficient (TC, SB) solution pairs. The algorithms are based on the cost operator theory of parametric programming for the transportation problem developed by the authors.     

Economic lot sizing with constant capacities and concave inventory costs

This article studies the classical single‐item economic lot‐sizing problem with constant capacities, fixed‐plus‐linear order costs, and concave inventory costs, where backlogging is allowed. We propose an O(T³) optimal algorithm for the problem, which improves upon the O(T⁴) running time of the famous algorithm developed by Florian and Klein (Manage Sci18 (1971) 12–20). Instead of using the standard dynamic programming approach by predetermining the minimal cost for every possible subplan, we develop a backward dynamic programming algorithm to obtain a more efficient implementation. © 2012 Wiley Periodicals, Inc. Naval Research Logistics, 2012     

Optimal interdiction policy for a flow network

This paper analyzes the problem faced by a field commander who, confronted by an enemy on N battlefields, must determine an interdiction policy for the enemy's logistics system which minimizes the amount of war material flowing through this system per unit time. The resource utilized to achieve this interdiction is subject to constraint. It can be shown that this problem is equivalent to determining the set of arcs Z* to remove subject to constraint from a directed graph G such that the resulting maximal flow is minimized. A branch and bound algorithm for the solution to this problem is described, and a numerical example is provided.     

A branch and bound algorithm for computing optimal replacement policies in consecutive k‐out‐of‐n‐systems

This paper presents a branch and bound algorithm for computing optimal replacement policies in a discrete‐time, infinite‐horizon, dynamic programming model of a binary coherent system with n statistically independent components, and then specializes the algorithm to consecutive k‐out‐of‐n systems. The objective is to minimize the long‐run expected average undiscounted cost per period. (Costs arise when the system fails and when failed components are replaced.) An earlier paper established the optimality of following a critical component policy (CCP), i.e., a policy specified by a critical component set and the rule: Replace a component if and only if it is failed and in the critical component set. Computing an optimal CCP is a optimization problem with n binary variables and a nonlinear objective function. Our branch and bound algorithm for solving this problem has memory storage requirement O(n) for consecutive k‐out‐of‐n systems. Extensive computational experiments on such systems involving over 350,000 test problems with n ranging from 10 to 150 find this algorithm to be effective when n ≤ 40 or k is near n. © 2002 Wiley Periodicals, Inc. Naval Research Logistics 49: 288–302, 2002; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/nav.10017     

Algorithms for the minimax transportation problem

In this paper, we consider a variant of the classical transportation problem as well as of the bottleneck transportation problem, which we call the minimax transportation problem. The problem considered is to determine a feasible flow x_ij from a set of origins I to a set of destinations J for which max_(i,j)εIxJ{c_ijx_ij} is minimum. In this paper, we develop a parametric algorithm and a primal-dual algorithm to solve this problem. The parametric algorithm solves a transportation problem with parametric upper bounds and the primal-dual algorithm solves a sequence of related maximum flow problems. The primal-dual algorithm is shown to be polynomially bounded. Numerical investigations with both the algorithms are described in detail. The primal-dual algorithm is found to be computationally superior to the parametric algorithm and it can solve problems up to 1000 origins, 1000 destinations and 10,000 arcs in less than 1 minute on a DEC 10 computer system. The optimum solution of the minimax transportation problem may be noninteger. We also suggest a polynomial algorithm to convert this solution into an integer optimum solution.     

Minimal disconnecting sets in directed multi-commodity networks

The problem of finding minimal disconnecting sets for multi-commodity directed networks may be solved using an arc-path formulation and Gomory's all-integer integer programming algorithm. However, the number of network constraints may be astronomical for even moderately sized networks. This paper develops a finite algorithm similar to Gomory's, but requiring no more than m rows in the tableau, where m is the number of arcs in the network.     

Algorithm to solve a chance‐constrained network capacity design problem with stochastic demands and finite support

We consider the problem of determining the capacity to assign to each arc in a given network, subject to uncertainty in the supply and/or demand of each node. This design problem underlies many real‐world applications, such as the design of power transmission and telecommunications networks. We first consider the case where a set of supply/demand scenarios are provided, and we must determine the minimum‐cost set of arc capacities such that a feasible flow exists for each scenario. We briefly review existing theoretical approaches to solving this problem and explore implementation strategies to reduce run times. With this as a foundation, our primary focus is on a chance‐constrained version of the problem in which α% of the scenarios must be feasible under the chosen capacity, where α is a user‐defined parameter and the specific scenarios to be satisfied are not predetermined. We describe an algorithm which utilizes a separation routine for identifying violated cut‐sets which can solve the problem to optimality, and we present computational results. We also present a novel greedy algorithm, our primary contribution, which can be used to solve for a high quality heuristic solution. We present computational analysis to evaluate the performance of our proposed approaches. © 2016 Wiley Periodicals, Inc. Naval Research Logistics 63: 236–246, 2016     

Machine sequencing: Disjunctive graphs and degree-constrained subgraphs

In two earlier papers, we proposed algorithms for finding an optimal sequence of processing m items on q machines, by finding a minimaximal path in a disjunctive network. In a third paper, this latter model was generalized (from 2-state to 3-state disjunctive graphs) so as to accommodate project scheduling with resource constraints. In this paper, we discuss another algorithm for the (2-state) disjunctive network problem, closely related to those mentioned above. To make the paper self-contained, section 2 briefly describes the problem. Section 3 introduces a class of constraints which forms the basis of the algorithm discussed in section 4. The constraints have only 1, ?1, or 0 as coefficients on the left-hand side, integers on the right-hand side. The whole procedure of generating these constraints and finding a feasible solution whenever a new constraint is added, can be interpreted (section 5) as a process of generating a graph with degree-constraints on its nodes, and then finding a subgraph satisfying the degree-constraints. The nodes of the graph are generated by solving a critical-path-problem, the feasible subgraphs are found by implicit enumeration.     

基于遗传算法的通信网络可靠性优化设计

在可靠性条件约束下 ,使网络成本最低是网络规划NP hard问题 .文章提出一种基于遗传算法的优化方法解决了这类问题 .仿真结果表明这种算法是有效的 .     

A finiteness proof for modified dantzig cuts in integer programming

Let be a basic solution to the linear programming problem subject to: where R is the index set associated with the nonbasic variables. If all of the variables are constrained to be nonnegative integers and x_u is not an integer in the basic solution, the linear constraint is implied. We prove that including these “cuts” in a specified way yields a finite dual simplex algorithm for the pure integer programming problem. The relation of these modified Dantzig cuts to Gomory cuts is discussed.     

A decomposable transshipment algorithm for a multiperiod transportation problem

A dynamic version of the transportation (Hitchcock) problem occurs when there are demands at each of n sinks for T periods which can be fulfilled by shipments from m sources. A requirement in period t₂ can be satisfied by a shipment in the same period (a linear shipping cost is incurred) or by a shipment in period t₁ < t₂ (in addition to the linear shipping cost a linear inventory cost is incurred for every period in which the commodity is stored). A well known method for solving this problem is to transform it into an equivalent single period transportation problem with mT sources and nT sinks. Our approach treats the model as a transshipment problem consisting of T, m source — n sink transportation problems linked together by inventory variables. Storage requirements are proportional to T² for the single period equivalent transportation algorithm, proportional to T, for our algorithm without decomposition, and independent of T for our algorithm with decomposition. This storage saving feature enables much larger problems to be solved than were previously possible. Futhermore, we can easily incorporate upper bounds on inventories. This is not possible in the single period transportation equivalent.     

Using hybrid metaheuristics for the one‐way and two‐way network design problem

A network with traffic between nodes is known. The links of the network can be designed either as two‐way links or as one‐way links in either direction. The problem is to find the best configuration of the network which minimizes total travel time for all users. Branch and bound optimal algorithms are practical only for small networks (up to 15 nodes). Effective simulated annealing and genetic algorithms are proposed for the solution of larger problems. Both the simulated annealing and the genetic algorithms propose innovative approaches. These innovative ideas can be used in the implementation of these heuristic algorithms for other problems as well. Additional tabu search iterations are applied on the best results obtained by these two procedures. The special genetic algorithm was found to be the best for solving a set of test problems. © 2002 Wiley Periodicals, Inc. Naval Research Logistics 49: 449–463, 2002; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/nav.10026     

Optimal allocation of unreliable components for maximizing expected profit over time

In the present paper, we solve the following problem: Determine the optimum redundancy level to maximize the expected profit of a system bringing constant returns over a time period T; i. e., maximize the expression \documentclass{article}\pagestyle{empty}\begin{document}$ P\int_0^T {Rdt - C} $\end{document}, where P is the return of the system per unit of time, R the reliability of this system, C its cost, and T the period for which the system is supposed to work We present theoretical results so as to permit the application of a branch and bound algorithm to solve the problem. We also define the notion of consistency, thereby determining the distinction of two cases and the simplification of the algorithm for one of them.