指令制导防空炮弹启控点参数的确定方法

简要阐述了指令制导防空炮弹有控弹道控制模式,建立了鸭舵控制力和控制力矩作用下的有控弹道模型,研究了弹丸理想启控姿态和启控位置的确定方法,得到了确定理想启控位置的启控函数.数值仿真结果表明,该启控函数简单、快速,具有较高精度,易于计算机程序实现,弹丸有控弹道也可保持飞行稳定.研究结果对今后深入展开指令制导防空炮弹的研究和工程设计具有一定的参考意义.     

Dynamic analysis of a guided projectile during engraving process

The reliability of the electronic components inside a guided projectile is highly affected by the launch dynamics of guided projectile. The engraving process plays a crucial role on determining the ballistic performance and projectile stability. This paper analyzes the dynamic response of a guided projectile during the engraving process. By considering the projectile center of gravity moving during the engraving process, a dynamics model is established with the coupling of interior ballistic equations. The results detail the stress situation of a guided projectile band during its engraving process. Meanwhile, the axial dynamic response of projectile in the several milliseconds following the engraving process is also researched. To further explore how the different performance of the engraving band can affect the dynamics of guided projectile, this paper focuses on these two aspects: (a) the effects caused by the different band geometry; and (b) the effects caused by different band materials. The time domain and frequency domain responses show that the dynamics of the projectile are quite sensitive to the engraving band width. A material with a small modulus of elasticity is more stable than one with a high modulus of elasticity.     

高原环境对弹丸动态稳定性的影响

分析了高原环境低空气密度对弹丸动态稳定性的影响。给出了弹道坐标系中的力方程组和非滚转弹体坐标系中的力矩方程组,并通过线性化方法得到弹丸角运动的状态空间模型。列出了角运动状态矩阵的四个特征根,并利用复数平方根计算方法得到特征根实部的表达式。提出弹丸动态稳定性稳定因子的新定义,并证明新的动态稳定条件与传统的动态稳定条件是一致的。讨论了低空气密度对尾翼稳定弹和旋转稳定弹动态稳定性的影响,并通过仿真说明弹丸在高原条件和平原条件下的动态稳定性存在差异。     

火箭发动机装药温度测量

随着火箭弹射击距离的不断增长,其发动机装药温度测量精度对落点精度的影响日益突出.提出了测量火箭弹装药代用材料的方法来测量火箭弹装药温度,克服了火箭弹装药温度测量困难,提高了测量精度.介绍了装药温度特性曲线测量方法,通过试验选取代用材料,设计了火箭弹装药相似体及药温测量装置,并对结果进行了分析.     

Flow computations past a triangular boattailed projectile

This paper presents a computational study of the air flow past a triangular boattailed projectile. The study shows that there is a single normal shock wave impinges the projectile at transonic speeds. At supersonic speeds, the formed shock waves are smeared compared to a conical boattailed projectile. Also, there is a reduction of the wake region behind the triangular base and the rear stagnation point is nearer to the projectile base resulting in base drag reduction. Moreover, there is an improvement of the stability of the triangular boattailed projectile since a lower overturning moment is incurred.     

Aerodynamics analysis of a hypersonic electromagnetic gun launched projectile

A hypersonic aerodynamics analysis of an electromagnetic gun (EM gun) launched projectile configuration is undertaken in order to ameliorate the basic aerodynamic characteristics in comparison with the regular projectile layout. Static margin and pendulum motion analysis models have been applied to evaluate the flight stability of a new airframe configuration. With a steady state computational fluid dynamics (CFD) simulation, the basic density, pressure and velocity contours of the EM gun projectile flow field at Mach number 5.0, 6.0 and 7.0 (angle of attack = 0°) have been analyzed. Furthermore, the static margin values are enhanced dramatically for the EM gun projectile with configuration optimization. Drag, lift and pitch property variations are all illustrated with the changes of Mach number and angle of attack. A particle ballistic calculation was completed for the pendulum analysis. The results show that the configuration optimized projectile, launched from the EM gun at Mach number 5.0 to 7.0, acts in a much more stable way than the projectiles with regular aerodynamic layout.     

Analysis on Stability of Coning Motion of Rockets Based on Nutation Theory

A nonlinear mathematic model taking the nutation and precession angles as variables for the coning motion of projectile was established according to a short period moment projection of the spining projectile. By introducing the generalized nutation angle and precession angular speed, the model that is difficult to be resolved can be transformed to a resolvable one. The interrelationship between nutation and precession was analyzed based on the linear model, and the stability condition was obtained for the spinning projectile. For the nonlinear model, the effects of the nutation and precession on the limit circle of the projectile's coning motion were investigated, and the analytical relations between the nutation angle and the precession angular speed in the steady coning motion of the spinning projectile were given.     

自然风对旋转弹丸外弹道性能影响的仿真研究

为研究自然风对旋转弹丸外弹道性能的影响,基于坐标变换理论考虑了地球曲率变化对刚体弹道模型的作用,分析了自然风对各气动力和气动力矩的影响,建立了非标准条件下的刚体外弹道模型。应用该模型对某105mm榴弹不同风速、风向下的外弹道过程进行仿真,结果表明,自然风对飞行弹丸的攻角姿态有较大影响,进而影响弹丸的射程和方向偏移量;自然风对弹丸攻角姿态的影响在弹丸飞行的初始阶段风速大小起主要作用,而在弹丸飞行的中间阶段则是风矢方向起主要作用。     

脱壳弹弹托分离的双目视觉测量

脱壳弹的弹托分离过程对弹体的飞行稳定性和打击效能具有显著的影响。针对脱壳弹出膛后弹托相对弹体的六自由度运动过程,提出采用基于双目视觉原理的弹托分离角测量方法。通过在弹体表面和弹托表面设置标记点,采用图像处理和跟踪算法实现对标记点的识别和跟踪。结合双目空间标定参数解算出标记点的空间位置,进而获得弹托相对弹体的分离角度,同时采用实验验证了上述测量方法的精度,其精度达到2%。以实验室进行的初速度1 550 m/s和1 750 m/s的脱壳弹射击试验为例,测量并分析了不同初速度下的弹托分离轨迹。结果表明:脱壳弹分离初速度越快,弹托分离轨迹越靠近弹体。     

球形头部弹丸侵彻运动靶板的数值模拟

为研究球形头部弹丸高速侵彻运动靶板的侵彻规律,运用LS-DYNA动力分析软件仿真研究了不同条件下球形头部弹丸对靶板的正侵彻效应,获得了运动靶板厚度、材料和弹丸着速3种参数对侵彻过程中弹丸弹道偏移、翻转角度和剩余速度的响应规律。结果表明,随着着速的提高,弹丸翻转幅度和弹道偏移量逐渐减小;随着靶板厚度的增加,弹丸正向翻转角度和轴向剩余速度显著减小,而弹道偏移量增大;3种材料运动靶板中,4340钢靶对弹丸弹道偏移、翻转角度和剩余速度的影响最大,Weldox460钢次之,LY12铝最小。     

Bang-Bang控制方式旋转导弹气动特性数值分析

为研究Bang-Bang控制式鸭舵对旋转导弹气动特性的影响,在CFD软件中采用嵌套网格方法模拟导弹的旋转和鸭舵的偏转,对Bang-Bang控制式旋转导弹在不同攻角、马赫数和转速下的气动特性进行了数值模拟,得到了气动特性变化规律。研究表明,因鸭舵洗流方向的改变,耦合导弹自旋会导致弹体和尾翼的侧向力发生突变。通过与不控鸭舵的旋转导弹进行对比,采用Bang-Bang控制式鸭舵的旋转导弹的周期平均侧向力系数变小,周期平均法向力系数变大。由于侧向力的存在,导弹在一个周期内的合力会偏离竖直方向,合力偏离竖直方向的角度随着马赫数、自旋速率和攻角的增大而减小。     

舰炮一维弹道修正弹对岸校射方法研究

一维弹道修正弹是近年来兵器领域新研制的一种低成本信息化弹药，目前对其校射方法尚未有成熟的标准。为此，在分析一维弹道修正弹对岸射击工作原理、计算有无控弹试射的基础上，提出舰炮武器系统使用有控一维弹道修正弹的校射新方法，并确定了校射的组数和发数。分别对使用新方法前后的射击效能进行了数值仿真，结果表明本方法能极大地提高舰炮武器系统的射击效能。所提方法对舰炮武器作战效能的提高具有较强的理论价值和一定的参考意义。     

旋成体射弹倾斜入水运动仿真

为了研究运动参数和弹头外形对弹体斜入水过程的影响规律,采用气液两相流体积分数和水汽空化模型,通过嵌套网格实现刚体三自由度运动学和动力学耦合,模拟了弹体以80～100 m/s速度倾斜入水开空泡阶段的运动过程。经文献实验验证,入水弹体速度与位移的误差为0～6%和-8%～0,转动角度误差为-6%～0。通过对入水速度和入水角度的多工况模拟研究,发现入水速度增大,弹体轴向冲击载荷增大,最大载荷与速度的平方呈线性关系,弹体速度非线性衰减率大;入水角增大,弹体转动角速率减小,运动稳定性强,速度衰减率不受入水角影响。与圆锥头部弹体相比,采用头部阶梯状修型后的弹体的平均速度衰减率、转动角速率和最大轴向冲击载荷分别降低到66.7%、40%和77.2%,显著提高了运动稳定性。     

一种变质心高速旋转炮弹鲁棒姿态控制律

针对采用变质心技术的高速旋转炮弹的姿态控制问题,提出一种基于扩张状态观测器的动态面控制方法。根据由弹体和单滑块组成的多体系统的特点,建立了系统的姿态动力学模型,并对其进行了合理的简化。将系统的滚转通道引起的强耦合、建模误差及外部扰动等视为未知不确定干扰,并且考虑由于炮弹尺寸限制而引起的多体系统控制输入(滑块位移)的有限性,设计了扩张状态观测器和辅助系统,分别对系统的干扰进行观测以及处理控制输入的有限性,综合动态面控制技术设计了姿态控制律,最后基于李雅普诺夫稳定性原理证明了控制器的稳定性。仿真结果表明,该控制器能够在克服干扰的前提下快速稳定地跟踪指令信号,具有良好的控制精度和鲁棒性。     

基于连续波雷达微多普勒效应的弹丸转速测试方法

针对目前弹丸转速测试方法的局限,提出了一种新的弹丸转速测试方法,利用连续波雷达探测弹丸旋转产生的微多普勒效应,建立了弹丸旋转运动引起的雷达回波微多普勒调制数学模型,推导了微多普勒频率与弹丸转速的解析关系,给出了弹丸转速微多普勒数据的实测方案,并通过弹丸旋转微动辨识与数字解调技术,提取出弹丸转速,经靶场试验验证,测试效果良好。     

高旋弹头滑块控制的建模与仿真

建立了双滑块机构下的高旋弹头动力学分析模型,对气动力矩变化和惯量张量变化给外弹道参数带来的影响进行了仿真研究,结果表明:双滑块机构对弹道三维方向的改变均有效果,同时弹头飞行攻角也是逐渐减小,因此系统的稳定性也是可以得到保证的,这就为后续的闭环控制提供了必要的保证.     

Improving the damage potential of W-Zr reactive structure material under extreme loading condition

Projectiles made of reactive structure materials(RSM)can damage the target with not only kinetic but also chemical energy,but the enhanced damage potential of RSM may become compromised if extreme loading condition disintegrates the projectile before the target is reached.In this work,a ductile coating of Ni was introduced to a tungsten-zirconium(W-Zr)alloy,a typical brittle RSM,to preserve the damage potential of the projectile.Detonation driving tests were carried out with X-ray photography and gun-powder deflagration driving tests were carried out with high-speed photography for the coated and uncoated RSM samples,respectively.The craters on the witness target were analyzed by scanning electron microscopy and X-ray diffraction.The Ni coating was found to effectively preserve the damage potential of the W-Zr alloy under extreme loading conditions,whereas the uncoated sample fractured and ignited before impacting the target in both detonation and deflagration driving.The crack propa-gation between the reactively brittle core and the ductile coating was analyzed based on the crack arrest theory to mechanistically demonstrate how the coating improves the structural integrity and preserves the damage potential of the projectile.Specifically,the Ni coating envelops the W-Zr core until the coated sphere penetrates the target,and the coating is then eroded and worn to release the reactive core for the projectile to damage the target more intensively.     

正规形法在弹箭非线性运动分析中的应用

非线性气动力对弹箭运动特性具有重要影响,而其复杂性和有效分析工具的缺乏往往制约了弹箭非线性运动理论的发展.为探索正规形方法在弹箭非线性运动分析中的应用,构造了考虑二次非线性阻尼和七次非线性静力矩下攻角方程的正规形,进而求得攻角的通用解析解,通过数值积分验证了其在较大攻角范围内的有效性,该解析解也同样适用于无阻尼角运动和...     

某尾翼式火箭增程迫弹飞行失稳原因分析

针对某尾翼式火箭增程迫弹弹道飞行失稳的现象，建立了火箭增程迫弹的六自由度弹道模型，仿真分析了该弹丸的摆动角变化规律、全弹道静稳定度、动态稳定度，共振转速、平衡转速等，最终确定共振为该弹飞行失稳的主要原因。为避免弹丸共振的产生，研究确定了该弹的最佳转速范围，通过最大射程及密集度试验结果表明平衡转速为8r～10r时，发动机作用对弹丸飞行影响较小，密集度最好。     

电磁发射高速旋转弹丸马格努斯效应

和传统火药发射弹丸相比,电磁发射弹丸具有初速高、射程远等优势,但尾部的电枢臂槽会使弹丸部流场不再轴对称,产生独特的气动力特性。基于三维非定常Navier-Stokers方程,采用滑移网格技术,分析电磁发射弹丸的气动力特性。研究表明,对于高速旋转的电磁发射弹丸,马格努斯效应来源于激波层内流场畸变和电枢臂的迎风面积变化的共同作用;电枢臂迎风面积的周期性变化是导致气动力和力矩周期性变化的原因,马格努斯力矩在滚转角45°和135°时分别达到最小值和最大值;电枢臂槽的存在既加剧了马格努斯效应(135°时增加50%以上),又使得压心周期性前移(绝对前移量达5%),并且随着转速的增加,马格努斯力矩增加和压心前移效果越来越显著,不利于弹丸的动稳定。