金属泡沫复合材料夹芯结构的压痕响应实验

金属泡沫夹芯结构是近年来新出现的一种明显具有结构和功能一体化特点的新型轻质材料,它在临近空间飞行器、航海及汽车等领域有着广阔的应用前景。以以纤维增强复合材料面板、闭孔泡沫铝芯子为特征的复合材料夹芯结构为研究对象,对其在球形压头作用下的压痕响应、损伤模式、变形机制和失效机理进行理论分析和实验研究。研究发现,泡沫铝复合材料夹芯结构的压痕响应是夹芯结构的各个组成部分的响应、相互作用以及压头属性的综合作用结果。泡沫铝复合材料夹芯结构在球压头作用下的损伤模式为基体开裂、纤维断裂、层间分层、泡沫铝的屈服及剪切断裂五种失效模式。     

Kagome点阵夹层板吸能性能的数值模拟

建立了Kagome点阵夹层板在爆炸冲击荷载作用下的数值模拟模型，计算分析了夹层板的面板厚度、夹芯层杆件半径以及爆炸冲击荷载峰值压力和作用时间对Kagome点阵夹层板吸能性能的影响。发现在给定的爆炸冲击荷载作用下，夹层板只有在合适的几何尺寸下才能使夹芯层的塑性变形能占整个结构塑性变形能的大部分，从而体现出该夹层板主要由夹芯层塑性变形耗能的优势。     

基于分束法的金属板小角度微波后向散射系数测试

使用微波分光仪构建了分束法测试系统,利用分束法测试了10.5GHz频率下0°～10°铝板、不锈钢板、镀锌铁板的后向散射系数,结果表明金属板的微波后向散射系数随方向角的增加而迅速减小,与理想导体平面的镜面反射特征一致,而且电导率较大的铝板更适合作为分束法的定标板。     

Multi-layer protective armour for underwater shock wave mitigation

The effect of underwater shock wave on different target plates has been studied.An underwater shock wave generator(shock tube) was used to study the interactions between water and different constructed targets which act as shock wave mitigation.Target plates,composed of sandwich of two aluminum sheets with rubber and foam in between,were prepared and studied.For comparison,the target plates composed of triple aluminum sheets were tested.The study includes the testing of the selected plates in water under the effect of different peak pressures and the analysis of the results.The strain gauge data and displacement sensors results showed that the multi-layer plates have higher level of underwater shock wave mitigation than the triple aluminum plates with strain and deflection of nearly 50%.     

方孔蜂窝夹层板在爆炸载荷下的动态响应

通过有限元数值模拟方法,对方孔蜂窝夹层板在爆炸冲击载荷下的动态响应和变形机理进行了分析.在单位面积质量以及夹芯层的高度、宽度给定的情况下,得出了最优的夹芯层相对密度.在此相对密度下,夹层板吸收能量最多,下面板变形最小,夹层板的抗冲击性能最优.将单位面积质量相等的夹层板和实体板进行了对比分析,结果表明:夹层板具有更加优良...     

一种新型防护结构对爆炸冲击波衰减特性的研究

运用大型有限元软件LS—DYNA,在相同爆炸冲击波作用下,对洞库口部普通钢板防护门和有泡沫铝夹层的钢板防护门两种防护结构的隔爆性能进行了数值模拟和对比分析,结果表明:有泡沫铝夹层的钢板防护门对爆炸冲击波有着良好的衰减特性。同时表明该新型防护结构对洞库口部抗爆炸冲击波设计有着很高的参考价值。     

PMI泡沫夹层结构雷达天线罩间接热-结构耦合分析与实验研究

机载PMI泡沫夹层结构雷达天线罩在环境温度变化时将产生表面变形现象并影响其使用性能,但对天线罩热变形结果进行实时检测分析具有一定难度。通过ANSYS间接热-结构耦合法建立了分析模型,对天线罩进行了计算分析,采用热膨胀片状模型进行了理论分析,在此基础上,设计并开展了温度冲击实验研究。结果表明, PMI夹层结构天线罩的热-结构耦合变形综合应变趋势是棱边处膨胀程度最大,由边缘至天线罩透波面中心处,膨胀程度逐渐减小；间接热-结构耦合计算应变值与实测应变值之间平均相差35.08%,间接热-结构耦合分析方法与模型具有一定的可信性。     

Optimal design of a novel cylindrical sandwich panel with double arrow auxetic core under air blast loading

The increasing threat of explosions on the battle field and the terrorist action requires the development of more effective blast resistance materials and structures. Curved structure can support the external loads effectively by virtue of their spatial curvature. In review of the excellent energy absorption property of auxetic structure, employing auxetic structure as core material in curved sandwich shows the potential to improve the protection performance. In this study, a novel cylindrical sandwich panel with double arrow auxetic (DAA) core was designed and the numerical model was built by ABAQUS. Due to the complexity of the structure, systematic parameter study and optimal design are conducted. Two cases of optimal design were considered, case1 focuses on reducing the deflection and mass of the structure, while case2 focuses on reducing the deflection and increasing the energy absorption per unit mass. Parameter study and optimal design were conducted based on Latin Hypercube Sampling (LHD) method, artificial neural networks (ANN) metamodel and the nondominated sorting genetic algorithm (NSGA-Ⅱ). The Pareto front was obtained and the cylindrical DAA structure performed much better than its equal solid panel in both blast resistance and energy absorption capacity. Optimization results can be used as a reference for different applications.     

铝合金-纯铝-钢复合板爆炸焊接试验及性能研究

通过设计爆炸焊接试验复合了铝合金-纯铝-钢爆炸复合板,对其界面形态、显微硬度及力学性能进行了研究。结果表明,铝合金-纯铝界面纯规则正弦波形,纯铝-钢复合板界面波形较小,铝合金-纯铝-钢复合板的界面剪切强度在75 MPa以上,爆炸复合过程中,纯铝与钢界面生成了金属间化合物,其界面处基体金属发生强烈的塑性变形。复合板变形及组织变化的结果造成复合板界面处的显微硬度最高,随着距界面距离的增加,两侧基体金属的硬度逐渐降低。     

钢管约束混凝土抗侵彻性能试验

进行了12.7mm穿甲枪弹侵彻钢管约束混凝土和PVC管约束混凝土厚靶试验,建立了硬芯枪弹侵彻深度公式,研究了钢管约束混凝土的抗侵彻性能。结果表明:钢管约束混凝土靶的破坏模式与无约束混凝土靶存在显著不同,其核心混凝土侧面出现了环向裂纹;相对于无约束混凝土靶,钢管约束混凝土靶的抗侵彻能力明显提高,并具有较强的抗多发打击能力。     

方钢刚性减振结构对组合板振动影响的计算分析

从质量引起的阻抗失配的原理出发,利用波动理论分析了在板中嵌入一块方钢所引起的对振动波传播的阻碍作用,并且通过NASTRAN有限元软件进行了模拟计算,检验了方钢结构的隔振效果.