Improved bounds for batch scheduling with nonidentical job sizes

Here, we revisit the bounded batch scheduling problem with nonidentical job sizes on single and parallel identical machines, with the objective of minimizing the makespan. For the single machine case, we present an algorithm which calls an online algorithm (chosen arbitrarily) for the one‐dimensional bin‐packing problem as a sub‐procedure, and prove that its worst‐case ratio is the same as the absolute performance ratio of . Hence, there exists an algorithm with worst‐case ratio , which is better than any known upper bound on this problem. For the parallel machines case, we prove that there does not exist any polynomial‐time algorithm with worst‐case ratio smaller than 2 unless P = NP, even if all jobs have unit processing time. Then we present an algorithm with worst‐case ratio arbitrarily close to 2. © 2014 Wiley Periodicals, Inc. Naval Research Logistics 61: 351–358, 2014     

Parallel machine scheduling with job assignment restrictions

In the classical multiprocessor scheduling problem independent jobs must be assigned to parallel, identical machines with the objective of minimizing the makespan. This article explores the effect of assignment restrictions on the jobs for multiprocessor scheduling problems. This means that each job can only be processed on a specific subset of the machines. Particular attention is given to the case of processing times restricted to one of two values, 1 and λ, differing by at most 2. A matching based polynomial time ε‐approximation algorithm is developed that has a performance ratio tending to . This algorithm is shown to have the best possible performance, tending to 3/2, for processing times 1 and 2. For the special case of nested processing sets, i.e., when the sets of machines upon which individual jobs may be assigned are non‐overlapping, the behavior of list scheduling algorithms is explored. Finally, for assignment restrictions determined by just one characteristic of the machines, such as disc storage or memory constraint in the case of high performance computing, we contribute an algorithm that provides a 3/2 worst case bound and runs in time linear in the number of jobs. © 2006 Wiley Periodicals, Inc. Naval Research Logistics, 2007     

Polynomial‐time approximation schemes for two‐machine open shop scheduling with nonavailability constraints

This paper addresses a two‐machine open shop scheduling problem, in which the machines are not continuously available for processing. The processing of an operation affected by a non‐availability interval can be interrupted and resumed later. The objective is to minimize the makespan. We present two polynomial‐time approximation schemes, one of which handles the problem with one non‐availability interval on each machine and the other for the problem with several non‐availability intervals on one of the machines. Problems with a more general structure of the non‐availability intervals are not approximable in polynomial time within a constant factor, unless . © 2005 Wiley Periodicals, Inc. Naval Research Logistics, 2006     

On‐line algorithms for minimizing makespan on batch processing machines

We consider problem of scheduling jobs on‐line on batch processing machines with dynamic job arrivals to minimize makespan. A batch machine can handle up to B jobs simultaneously. The jobs that are processed together from a batch, and all jobs in a batch start and complete at the same time. The processing time of a batch is given by the longest processing time of any job in the batch. Each job becomes available at its arrival time, which is unknown in advance, and its processing time becomes known upon its arrival. In the first part of this paper, we address the single batch processing machine scheduling problem. First we deal with two variants: the unbounded model where B is sufficiently large and the bounded model where jobs have two distinct arrival times. For both variants, we provide on‐line algorithms with worst‐case ratio (the inverse of the Golden ratio) and prove that these results are the best possible. Furthermore, we generalize our algorithms to the general case and show a worst‐case ratio of 2. We then consider the unbounded case for parallel batch processing machine scheduling. Lower bound are given, and two on‐line algorithms are presented. © 2001 John Wiley & Sons, Inc. Naval Research Logistics 48: 241–258, 2001     

Analysis of practical policies for a single link distribution system

In this paper we consider a transportation problem where several products have to be shipped from an origin to a destination by means of vehicles with given capacity. Each product is made available at the origin and consumed at the destination at the same constant rate. The time between consecutive shipments must be greater than a given minimum time. All demand needs to be satisfied on time and backlogging is not allowed. The problem is to decide when to make the shipments and how to load the vehicles with the objective of minimizing the long run average of the transportation and the inventory costs at the origin and at the destination over an infinite horizon. We consider two classes of practical shipping policies, the zero inventory ordering (ZIO) policies and the frequency‐based periodic shipping (FBPS) policies. We show that, in the worst‐case, the Best ZIO policy has a performance ratio of . A better performance guarantee of is shown for the best possible FBPS policy. The performance guarantees are tight. Finally, combining the Best ZIO and the Best FBPS policies, a policy that guarantees a performance is obtained. Computational results show that this policy gives an average percent optimality gap on all the tested instances of <1%. © 2007 Wiley Periodicals, Inc. Naval Research Logistics, 2007     

An absolute approximation algorithm for scheduling unrelated machines

Non‐preemptive scheduling of n independent jobs on m unrelated machines so as to minimize the maximal job completion time is considered. A polynomial algorithm with the worst‐case absolute error of min{(1 ? 1/m)p_max, p} is presented, where p_max is the largest job processing time and p is the mth element from the non‐increasing list of job processing times. This is better than the earlier known best absolute error of p_max. The algorithm is based on the rounding of acyclic multiprocessor distributions. An O(nm²) algorithm for the construction of an acyclic multiprocessor distribution is also presented. © 2006 Wiley Periodicals, Inc. Naval Research Logistics, 2006     

Skewness correction X̄ and R charts for skewed distributions

This paper proposes a skewness correction (SC) method for constructing the and R control charts for skewed process distributions. Their asymmetric control limits (about the central line) are based on the degree of skewness estimated from the subgroups, and no parameter assumptions are made on the form of process distribution. These charts are simply adjustments of the conventional Shewhart control charts. Moreover, the chart is almost the same as the Shewhart chart if the process distribution is known to be symmetrical. The new charts are compared with the Shewhart charts and weighted variance (WV) control charts. When the process distribution is in some neighborhood of Weibull, lognormal, Burr or binomial family, simulation shows that the SC control charts have Type I risk (i.e., probability of a false alarm) closer to 0.27% of the normal case. Even in the case where the process distribution is exponential with known mean, not only the control limits and Type I risk, but also the Type II risk of the SC charts are closer to those of the exact and R charts than those of the WV and Shewhart charts. © 2003 Wiley Periodicals, Inc. Naval Research Logistics 50: 555–573, 2003     

Scheduling deteriorating jobs to minimize makespan

We consider a single-machine problem of scheduling n independent jobs to minimize makespan, in which the processing time of job J_j grows by w_j with each time unit its start is delayed beyond a given common critical date d. This processing time is p_j if J_j starts by d. We show that this problem is NP-hard, give a pseudopolynomial algorithm that runs in time and O(nd) space, and develop a branch-and-bound algorithm that solves instances with up to 100 jobs in a reasonable amount of time. We also introduce the case of bounded deterioration, where the processing time of a job grows no further if the job starts after a common maximum deterioration date D > d. For this case, we give two pseudopolynomial time algorithms: one runs in O(n²d(D − d) time and O(nd(D − d)) space, the other runs in p_j)²) time and p_j) space. © 1998 John Wiley & Sons, Inc. Naval Research Logistics 45: 511–523, 1998     

The knapsack problem: A survey

A unifying survey of the literature related to the knapsack problem; that is, maximize \documentclass{article}\pagestyle{empty}\begin{document}$ \sum\limits_i {v_i x_{i,} } $\end{document}, subject to \documentclass{article}\pagestyle{empty}\begin{document}$ \sum\limits_j {w_i x_i W} $\end{document} and x_i ? 0, integer; where v_i, w_i and W are known integers, and w_i (i = 1, 2, …, N) and W are positive. Various uses, including those in group theory and in other integer programming algorithms, as well as applications from the literature, are discussed. Dynamic programming, branch and bound, search enumeration, heuristic methods, and other solution techniques are presented. Computational experience, and extensions of the knapsack problem, such as to the multi-dimensional case, are also considered.     

Scheduling parallel machines with inclusive processing set restrictions

We consider the problem of assigning a set of jobs to different parallel machines of the same processing speed, where each job is compatible to only a subset of those machines. The machines can be linearly ordered such that a higher‐indexed machine can process all those jobs that a lower‐indexed machine can process. The objective is to minimize the makespan of the schedule. This problem is motivated by industrial applications such as cargo handling by cranes with nonidentical weight capacities, computer processor scheduling with memory constraints, and grades of service provision by parallel servers. We develop an efficient algorithm for this problem with a worst‐case performance ratio of + ε, where ε is a positive constant which may be set arbitrarily close to zero. We also present a polynomial time approximation scheme for this problem, which answers an open question in the literature. © 2008 Wiley Periodicals, Inc. Naval Research Logistics, 2008     

A finiteness proof for modified dantzig cuts in integer programming

Let be a basic solution to the linear programming problem subject to: where R is the index set associated with the nonbasic variables. If all of the variables are constrained to be nonnegative integers and x_u is not an integer in the basic solution, the linear constraint is implied. We prove that including these “cuts” in a specified way yields a finite dual simplex algorithm for the pure integer programming problem. The relation of these modified Dantzig cuts to Gomory cuts is discussed.     

Asymptotic analysis of periodic policies for the inventory routing problem

In this article, a distribution system is studied where the sum of transportation and inventory costs is to be minimized. The inventory holding cost is assumed to be the same for all retailers. A fixed partition (FP) periodic policy is proposed with tight asymptotic worst‐case performance of 3/2 with respect to the best possible policy. This bound cannot be improved in the class of FP periodic policies. In partition‐based PB policies, the retailers are first partitioned into sets and then the sets are grouped in such a way that sets of retailers within a group are served together at selected times. A PB periodic, policy is presented with tight worst‐case asymptotic performance of with respect to the best possible policy. This latter performance improves the worst‐case asymptotic performance of of the previously best known policy for this problem. We also show that the proposed PB periodic policy has the best worst‐case asymptotic performance within the class of PB policies. Finally, practical heuristics inspired by the analyzed policies are designed and tested. The asymptotic worst–case performances of the heuristics are shown to be the same of those of the analyzed policies. Computational results show that the heuristics suggested are less than 6.4% on average from a lower bound on the optimal cost when 50 or more retailers are involved. © 2013 Wiley Periodicals, Inc. Naval Research Logistics 00: 000–000, 2013     

The hnbue and hnwue classes of life distributions

Different properties of the HNBUE (HNWUE) class of life distributions (i.e.), for which \documentclass{article}\pagestyle{empty}\begin{document}$\int_t^\infty {\,\,\,\mathop F\limits^-(x)\,dx\, \le \,(\ge)\,\mu }\]$\end{document} exp(?t/μ) for t ≥ 0, where μ = \documentclass{article}\pagestyle{empty}\begin{document}$\int_t^\infty {\,\,\,\mathop F\limits^-(x)\,dx}$\end{document} are presented. For instance we characterize the HNBUE (HNWUE) property by using the Laplace transform and present some bounds on the survival function of a HNBUE (HNWUE) life distribution. We also examine whether the HNBUE (HNWUE) property is preserved under the reliability operations (i) formation of coherent structure, (ii) convolution and (iii) mixture. The class of distributions with the discrete HNBUE (discrete HNWUE) property (i.e.), for which \documentclass{article}\pagestyle{empty}\begin{document}$\sum\limits_{j=k}^\infty {\mathop{\mathop P\limits^-_{j\,\,\,}\, \le(\ge)\,\mu(1 - 1/\mu)^{^k }}\limits^{}} $\end{document} for k = 0, 1, 2, ?, where μ =\documentclass{article}\pagestyle{empty}\begin{document}$\sum\limits_{j=0}^\infty {\mathop {\mathop P\limits^- _{j\,\,\,\,\,}and\mathop P\limits^ - _{j\,\,\,\,\,}=}\limits^{}}\,\,\sum\limits_{k=j+1}^\infty {P_k)}$\end{document} is also studied.     

A dual criteria sequencing problem with earliness and tardiness penalties

We consider the problem of sequencing n jobs on a single machine, with each job having a processing time and a common due date. The common due date is assumed to be so large that all jobs can complete by the due date. It is known that there is an O(n log n)‐time algorithm for finding a schedule with minimum total earliness and tardiness. In this article, we consider finding a schedule with dual criteria. The primary goal is to minimize the total earliness and tardiness. The secondary goals are to minimize: (1) the maximum earliness and tardiness; (2) the sum of the maximum of the squares of earliness and tardiness; (3) the sum of the squares of earliness and tardiness. For the first two criteria, we show that the problems are NP‐hard and we give a fully polynomial time approximation scheme for both of them. For the last two criteria, we show that the ratio of the worst schedule versus the best schedule is no more than . © 2002 Wiley Periodicals, Inc. Naval Research Logistics 49: 422–431, 2002; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/nav.10020     

Readiness and the optimal redeployment of resources

This paper considers the problem of the optimal redeployment of a resource among different geographical locations. Initially, it is assumed that at each location i, i = 1,…, n, the level of availability of the resource is given by a₁ ≧ 0. At time t > 0, requirements R_f(t) ≧ 0 are imposed on each location which, in general, will differ from the a₁. The resource can be transported from any one location to any other in magnitudes which will depend on t and the distance between these locations. It is assumed that ΣR_j > Σa_t The objective function consideis, in addition to transportation costs incurred by reallocation, the degree to which the resource availabilities after redeployment differ from the requirements. We shall associate the unavailabilities at the locations with the unreadiness of the system and discuss the optimal redeployment in terms of the minimization of the following functional forms: \documentclass{article}\pagestyle{empty}\begin{document}$ \sum\limits_{j = 1}^n {kj(Rj - yj) + } $\end{document} transportation costs, Max \documentclass{article}\pagestyle{empty}\begin{document}$ \mathop {Max}\limits_j \,[kj(Rj - yj)] + $\end{document} transportation costs, and \documentclass{article}\pagestyle{empty}\begin{document}$ \sum\limits_{j = 1}^n {kj(Rj - yj)^2 + } $\end{document} transportation costs. The variables y_j represent the final amount of the resource available at location j. No benefits are assumed to accrue at any location if y_j > R_j. A numerical three location example is given and solved for the linear objective.     

Optimal allocation of unreliable components for maximizing expected profit over time

In the present paper, we solve the following problem: Determine the optimum redundancy level to maximize the expected profit of a system bringing constant returns over a time period T; i. e., maximize the expression \documentclass{article}\pagestyle{empty}\begin{document}$ P\int_0^T {Rdt - C} $\end{document}, where P is the return of the system per unit of time, R the reliability of this system, C its cost, and T the period for which the system is supposed to work We present theoretical results so as to permit the application of a branch and bound algorithm to solve the problem. We also define the notion of consistency, thereby determining the distinction of two cases and the simplification of the algorithm for one of them.     

Machine scheduling with an availability constraint and job delivery coordination

In this paper we study the scheduling problem that considers both production and job delivery at the same time with machine availability considerations. Only one vehicle is available to deliver jobs in a fixed transportation time to a distribution center. The vehicle can load at most K jobs as a delivery batch in one shipment due to the vehicle capacity constraint. The objective is to minimize the arrival time of the last delivery batch to the distribution center. Since machines may not always be available over the production period in real life due to preventive maintenance, we incorporate machine availability into the models. Three scenarios of the problem are studied. For the problem in which the jobs are processed on a single machine and the jobs interrupted by the unavailable machine interval are resumable, we provide a polynomial algorithm to solve the problem optimally. For the problem in which the jobs are processed on a single machine and the interrupted jobs are nonresumable, we first show that the problem is NP‐hard. We then propose a heuristic with a worst‐case error bound of 1/2 and show that the bound is tight. For the problem in which the jobs are processed on either one of two parallel machines, where only one machine has an unavailable interval and the interrupted jobs are resumable, we propose a heuristic with a worst‐case error bound of 2/3. © 2006 Wiley Periodicals, Inc. Naval Research Logistics, 2007     

On online bin packing with LIB constraints

In many applications of packing, the location of small items below large items, inside the packed boxes, is forbidden. We consider a variant of the classic online one‐dimensional bin packing, in which items allocated to each bin are packed there in the order of arrival, satisfying the condition above. This variant is called online bin packing problem with LIB (larger item in the bottom) constraints. We give an improved analysis of First Fit showing that its competitive ratio is at most , and design a lower bound of 2 on the competitive ratio of any online algorithm. In addition, we study the competitive ratio of First Fit as a function of an upper bound (where d is a positive integer) on the item sizes. Our upper bound on the competitive ratio of First Fit tends to 2 as d grows, whereas the lower bound of two holds for any value of d. Finally, we consider several natural and well known algorithms, namely, Best Fit, Worst Fit, Almost Worst Fit, and Harmonic, and show that none of them has a finite competitive ratio for the problem. © 2009 Wiley Periodicals, Inc. Naval Research Logistics, 2009     

Scheduling twin robots on a line

This article introduces the twin robots scheduling problem (TRSP), in which two robots positioned at the opposite ends of a rail are required to deliver items to positions along the rail, and the objective is to minimize the makespan. A proof of ‐hardness of the TRSP is presented, along with exact and heuristic algorithms. Computational results on challenging instances are provided.Copyright © 2014 Wiley Periodicals, Inc. Naval Research Logistics 61: 119–130, 2014     

On labeling the vertices of products of complete graphs with distance constraints

Variations of Hale's channel assignment problem, the L(j, k)‐labeling problem and the radio labeling problem require the assignment of integers to the vertices of a graph G subject to various distance constraints. The λ_j,k‐number of G and the radio number of G are respectively the minimum span among all L(j, k)‐labelings, and the minimum span plus 1 of all radio labelings of G (defined in the Introduction). In this paper, we establish the λ_j,k‐number of ∏ K for pairwise relatively prime integers t₁ < t₂ < … < t_q, t₁ ≥ 2. We also show the existence of an infinite class of graphs G with radio number |V(G)| for any diameter d(G). © 2003 Wiley Periodicals, Inc. Naval Research Logistics, 2005