基于ICA的多姿态人脸表示

将独立成分分析(ICA)应用于多姿态人脸识别。对比分析了ICA和主成分分析(PCA)两种人脸识别方法的差异,并重点研究了多姿态人脸的独立成分(IC)表示。在基于权向量幅值的方法基础上,引入了基于比例因子的IC核选择的新方法。实验表明,新方法有利于提高识别的准确率和识别的效率。     

基于PCA和BP神经网络的水下目标识别方法研究

针对被动声纳信号的特点,提出了基于信号线谱特征的主成分分析(PCA)特征选择方法,其优点是从复杂的目标信号中提取目标的特有信息,降低了目标特征维数.将此方法用于实录的三类水下目标数据,采用BP神经网络对目标进行识别分类,仿真结果说明了所提出的方法的正确性和有效性.     

基于主成分分析和神经网络的目标识别

采用主成分分析法将多项识别属性进行综合聚集,减少关联属性对识别的干扰,达到属性约简的目的。利用神经网络进行目标识别,通过优化训练策略,可以提高网络的收敛速度和泛化能力。主成分分析法与神经网络结合既能高效识别已知样本,又能对未知样本具有很强的自学与适应能力,从而有效地对海战场目标进行识别。通过对比仿真,证明了算法的有效性。     

老年建筑防火设计

针对老年建筑在消防方面给我们提出的新课题,介绍人口老龄化和老年建筑的基本情况,分析老年建筑的消防特点,并着重对老年建筑防火设计的若干问题进行探讨.     

基于PCA特征的快速SAR图像目标识别方法

目标识别是SAR图像解译的重要一环,受到广泛的关注,而实时性又是评估目标识别系统性能的主要指标之一.从实时的角度出发,提出了一种快速的SAR目标识别方法.该方法采用基于Hebb学习规则的主分量分析(PCA)进行特征提取,使用多层感知器神经网络(MLP NN)进行目标分类.实验结果表明,在维持较好识别性能的前提下,该方法具有内存需求少、运行速度快的特点,能用于实时处理.     

视频监视前景图像估计的盲源提取方法

在视频图像运动检测的背景消减方法中，场景图像或帧可建模为前景图像和背景图像的叠加或线性混合。然而，实际中图像的背景和前景往往相关，常用的主成分分析和独立分量分析等方法难以实现准确提取。为此，将视频图像的前景提取建模为盲源提取问题，提出了一种基于均方交叉预测误差的盲源提取方法，可以从相关的源视频图像中提取期望的前景图像，并将该方法扩展应用于基于基本模型和特征背景模型的背景消减方案中。基于人工和实际视频的实验验证了盲源提取背景消减方法的可行性和有效性。     

Relative Aging of Coherent Systems

In this article, we carry out the stochastic comparison between coherent systems through the relative aging order when component lifetimes are independent and identically distributed. We make use of the signature to characterize the structure of coherent systems, and derive several sufficient conditions under which the compared systems with the common size can be ordered in the sense of relative aging. Specially, we present some scenarios wherein the better a coherent system is, the faster it ages. Moreover, we discuss the relative aging of dual systems as well. Several numerical examples are provided to illustrate the theoretical results. © 2017 Wiley Periodicals, Inc. Naval Research Logistics 64: 345–354, 2017     

基于PCA-RBF网络的储运过程管道堵塞故障诊断方法

针对现代储运过程管道堵塞故障诊断时,提取的过程参数多导致诊断速度慢、性能差等问题,提出了基于主成分分析（PCA）和径向基函数（RBF）神经网络故障的诊断方法。首先利用PCA方法对储运过程高维历史数据矩阵进行特征提取,提取的故障特征信息作为训练集,并给出故障特征信息的分类号;然后将其作为RBF神经网络分类器的输入输出进行故障模式识别。仿真实验表明：该方法应用于储运过程管道堵塞故障诊断,不仅大幅度地降低了诊断模型的训练时间,而且提高了诊断正确率。     

Nb掺杂对双钙钛矿化合物Sr2FeMoO6电阻特性的影响

系统地研究了双钙钛矿结构氧化物Sr2FeMo1-xNbxO6中Mo位的Nb替代效应,发现Nb替代Mo可强烈抑制Sr2FeMoO6的金属导电性,并大大提高掺杂样品的电阻值和庞磁电阻特性,在5K下,Sr2FeMo0.6Nb0.4O6的庞磁电阻分别达到23%(1T)和31%(3T),在室温下,Sr2FeMo0.75Nb0.25O6的磁电阻分别达到4%(1T)和6%(3T).     

Effect of energy content of the nitraminic plastic bonded explosives on their performance and sensitivity characteristics

Information about the forty nine nitraminic plastic bonded explosives (PBXs) and different nitramines were collected. Fillers of these PBXs are nitramines 1,3,5-trinitro-1,3,5-triazinane (RDX) and β-1,3,5,7-tetranitro-1,3,5-tetrazocane (β-HMX), cis-1,3,4,6-tetranitro-octahydroimidazo-[4,5-d]imidazole (bicyclo-HMX, BCHMX) and ε-2,4,6,8,10,12-hexanitro-2,4,6,8,10,12-hexaazaisowurtzitane (ε-HNIW, CL-20) which are bonded by polyfluoro-elastomers, polydimethyl-siloxane, poly-glycidyl azide, polyisobutylene, polystyrene-butadiene, poly-acrylonitrile-butadiene and hydroxyl-terminated polybutadiene in addition to a melt cast compositions based on 2,4,6-trinitrotoluene. For thirty two of these PBXs the relationships are specified and analyzed between heats of their combustion and relative explosive strengths; by means of these relationships it might be possible to estimate, which groupings in the macromolecule of binder could be liable to their primary fission in the PBXs initiation. Similarly, for forty two of these explosives, the relationships are described and analyzed between their enthalpies of formation and impact sensitivities; here is especially attention paid to PBXs filled by BCHMX. Specific rate constants from Vacuum Stability Test (VST) of four nitramines and twenty PBXs are introduced into relationships with their enthalpies of formation. Regarding to all the mentioned cases, increasing of energy content of the studied explosives leads to increase of the relative explosive strength or initiation reactivity, respectively. Exception with the opposite trend, the outputs of VST are for BCHMX, where in PBXs are matrices with the esteric plasticizers or the energetic poly-glycidyl azide. Admixture of RDX or HMX, respectively, into the BCHX PBXs gives ternary PBXs whose thermal stability, in the sense of applied VST, is higher comparing to the original binary explosives.     

一种改进的无参考图像质量评估算法

无参考图像质量评估方法一直是图像质量研究所关注的重点。本文针对无参考图像质量评估问题，在当前被广泛接受的 DIIVINE 图像质量评估方法基础上进行了深入的研究，研究发现经典的 DIIVINE 方法中使用了过多的统计特征量，由于统计量无差别的使用影响了方法的预测性能。基于此，利用主成分分析（PCA）算法对该特征向量进行降维，得到“精简的特征向量”，用此向量可以达到更好的分类性能和评估性能。试验证明，在图像数据库上，该算法表现出较好的预测性能，其性能优于其他主流的无参考图像评估算法。     

基于核主成分分析的高校科技创新能力评价研究

高校在国家创新体系中占有举足轻重的地位,高校科技创新能力评价研究对提高高校科技创新能力具有积极的意义.基于核主成分分析的评价方法能够有效去除高校科技创新能力评价指标体系中的废咝韵喙匦畔?从而取得较好的评价结果.以15所教育部直属高校科研统计数据为样本,利用核主成分分析法进行了高校科技创新能力评价的实证分析,并与主成分分析结果进行了比较,结果表明,核主成分分析能够取得更高的主特征值累积贡献率,从而产生更为合理的评价结果.     

功率循环下IGBT模块电热参数变化规律分析

为了分析IGBT模块老化过程中电热参数的变化规律,对IGBT模块进行了功率循环加速老化试验,并基于单脉冲测试方法在加速老化试验进程中每间隔1 000次功率循环,测取一次IGBT的结温、集电极电流与饱和压降三维关系曲面、开关能耗、热阻抗以及瞬态热阻抗曲线。IGBT模块老化失效时,其饱和压降、开通能耗、关断能耗以及热阻较其初始值分别增大了3.92%、12.05%、18.87%和22.65%,试验结果表明随着IGBT模块功率循环次数的增多,相同工作条件下IGBT饱和压降的增幅逐渐加大,而饱和压降、结温和集电极电流三者间的内在关系没有明显变化;IGBT瞬态热阻抗曲线暂态部分几乎不变,稳态部分向上移动的幅度逐渐加大;测取的IGBT模块电热参数中饱和压降增幅最小,开关能耗增幅较大,模块热阻的增幅最为明显。     

Dynamic signatures and their use in comparing the reliability of new and used systems

The signature of a system with independent and identically distributed (i.i.d.) component lifetimes is a vector whose ith element is the probability that the ith component failure is fatal to the system. System signatures have been found to be quite useful tools in the study and comparison of engineered systems. In this article, the theory of system signatures is extended to versions of signatures applicable in dynamic reliability settings. It is shown that, when a working used system is inspected at time t and it is noted that precisely k failures have occurred, the vector s [0,1]^n‐k whose jth element is the probability that the (k + j)th component failure is fatal to the system, for j = 1,2,2026;,n ‐ k, is a distribution‐free measure of the design of the residual system. Next, known representation and preservation theorems for system signatures are generalized to dynamic versions. Two additional applications of dynamic signatures are studied in detail. The well‐known “new better than used” (NBU) property of aging systems is extended to a uniform (UNBU) version, which compares systems when new and when used, conditional on the known number of failures. Sufficient conditions are given for a system to have the UNBU property. The application of dynamic signatures to the engineering practice of “burn‐in” is also treated. Specifically, we consider the comparison of new systems with working used systems burned‐in to a given ordered component failure time. In a reliability economics framework, we illustrate how one might compare a new system to one successfully burned‐in to the kth component failure, and we identify circumstances in which burn‐in is inferior (or is superior) to the fielding of a new system. © 2009 Wiley Periodicals, Inc. Naval Research Logistics, 2009     

关于S147 铝合金形变时效强化研究

本文研究了S147铝合金板材在形变时效处理各工艺阶段中的组织与性能。用扫描电镜观察分析了材料的断口形貌,并用薄膜试样在透射电镜下分析研究了该合金形变时效处理后的微观亚结构及过渡相析出物特征。结果表明,最佳形变时效处理可显著提高S147铝合金的强度及塑韧性,并能改善其过渡相析出过程及特征。     

矿物掺合料对GRC耐久性的影响

通过长达3年的标准养护试验及80℃热水加速老化试验,研究了矿物掺合料粉煤灰、硅灰对耐碱玻璃纤维增强普通硅酸盐水泥(GRC)耐久性的影响,并对矿物掺合料改善GRC耐久性的机理作了初步分析探讨。研究结果表明,粉煤灰和硅灰矿物掺合料可明显改善GRC的长期耐久性。     

Cross-linking density and aging constitutive model of HTPB coating under prestrain thermal accelerated aging

In order to study the cross-linking density and aging constitutive relationship of HTPB coating during storage, the thermal accelerated aging tests at 0%, 3%, 6% and 9% prestrains were carried out. The cross-linking density of HTPB coating at different aging stages were tested using low-field ¹H NMR and the variation of cross-linking density was analyzed. The aging model of cross-linking density considering the chemical aging and the physical stretching factors was established. The uniaxial tensile tests were carried out on HTPB coating at different aging stages and the cross-linking density was introduced into Ogden hyperelastic constitutive model as a characterization parameter of correction coefficient. Combined with uniaxial tensile test results, a prestrain aging constitutive model of HTPB coating was established. The results show that the cross-linking density of HTPB coating increases rapidly at first and then slowly with the increase of thermal accelerated aging time without prestrain. Under prestrain conditions, the cross-linking density of HTPB coating decreases at the early stage, and increases rapidly at first and then slowly at the middle and late stages of thermal accelerated aging. The correlation coefficients of aging model of cross-linking density and aging constitutive model with test results are R > 0.9500 and R > 0.9900 respectively, which can be used to accurately describe the cross-linking density and aging constitutive relationship of HTPB coating under prestrain accelerated thermal aging conditions.     

定应变作用下NEPE推进剂老化特性及寿命预估研究

为考察定应变作用下NEPE推进剂的老化特性,研究了20%定应变作用下NEPE推进剂贮存老化过程中力学性能、凝胶性能和界面性能的变化.研究结果表明:定应变作用下NEPE推进剂在贮存老化过程中最大抗拉强度降低,最大延伸率变化较小,其老化失效主要表现为强度的失效;定应变下NEPE推进剂的凝胶百分数和粘附功随老化时间的延长而降低,NEPE推进剂粘合剂基体的降解断裂和界面的"脱湿"是其主要的老化机理;定应变下NEPE推进剂的力学性能与细观性能的相关性研究表明,最大抗拉强度与凝胶百分数和粘附功存在相关关系,计算了其关系式,建立了由细观性能评估推进剂宏观力学性能的方法;选择最大抗拉强度下降30%时失效,20%定应变下NEPE推进剂的贮存寿命为8.3年.     

结合层次法与主成分分析特征变换的宫颈细胞识别

对宫颈细胞进行多分类可以自动识别出不同状态的细胞,进而为宫颈癌诊断提供科学依据。在用6种多分类算法进行实验后,选取支持向量机作为基分类器,先用一对一策略训练6个分类器进行3分类,然后再训练1个2分类器,这种二层4分类方法提高了识别准确率。考虑不同层特征模式的差异性,在保证识别性能的同时,每层分类前先采用主成分分析法将原始154维特征变换到低维空间,去除冗余特征,加快识别速度。实验证明,所提层次主成分分析法在宫颈细胞分类中相比6种传统多分类方法有更高的识别准确率,可达90%以上;识别速度也较普通层次法提升了21.31%。