三明治复合材料加筋L型接头的弯曲承载能力和损伤机理

针对一种三明治复合材料加筋L型接头,介绍了其结构形式和成型工艺,通过试验测试了接头的弯曲承载能力,分析了接头的破坏模式,并对其损伤机理进行了研究,以探求接头的技术改进路径。研究结果表明:L型接头具有良好的吸能效果,在结构发生大变形破坏时,仍具有较高的弯曲承载能力;L型接头的破坏主要发生在垂横加强筋的相交处,初始损伤是相交处侧面的玻璃钢和芯材发生界面分离;工程上应将改进L型接头垂横加强筋相交处的蒙皮和芯材之间的连接工艺作为提高接头承载能力的技术路径。     

A study on the surface overpressure distribution and formation of a double curvature liner under a two-point initiation

The formation mechanism of an EFP(explosively formed projectile) using a double curvature liner under the overpressure effect generated by a regular oblique reflection was investigated in this paper.Based on the detonation wave propagation theory,the change of the incident angle of the detonation wave collision at different positions and the distribution area of the overpressure on the surface of the liner were calculated.Three-dimensional numerical simulations of the formation process of the EFP with tail as well as the ability to penetrate 45# steel were performed using LS-DYNA software,and the EFP ve-locity,the penetration ability,and the forming were assessed via experiments and x-ray photographs.The experimental results coincides with those of the simulations.Results indicate that the collision of the detonation wave was controlled to be a regular oblique reflection acting on the liner by setting the di-mensions of the unit charge and maintaining the pressure at the collision point region at more than 2.4 times the CJ detonation when the incident angle approached the critical angle.The distance from the liner midline to the boundary of the area within which the pressure ratio of the regular oblique reflection pressure to the CJ detonation pressure was greater than 2.5,2,and 1.5was approximately 0.66 mm,1.32 mm,and 3.3 mm,respectively.It is noted that pressure gradient caused the liner to turn inside out in the middle to form the head of the EFP and close the two tails of the EFP at approximately 120μs.The penetration depth of the EFP into a 45# steel target exceeded 30 mm,and there was radial expansion between the head and tail of the EFE increasing the penetration resistance of the EFP.Therefore,the structural size of the unit charge and the liner can be further optimized to reduce resistance to increase the penetration ability of the EFP.     

基于优化蚁群算法的装备调拨决策系统研究与设计

将蚁群算法和遗传算法应用于装备调拨决策系统,实现了装备调拨决策信息的生成.同时利用遗传算法对蚁群算法的参数进行了优化,实验证明优化后的蚁群算法在平均路径长度、算法平均执行时间和总执行时间上较传统蚁群算法都有一定程度的改进.     

基于遗传算法的无线通信节点部署优化策略

根据无线通信节点部署过程中网络受到区域环境影响和电波传播损耗等实际问题,建立了考虑区域影响的信号衰减模型和无线通信网络覆盖模型,提出了一种综合考虑网络覆盖和通信干扰的优化部署策略。该策略采用了加速遗传算法,大大降低了计算量。基于该优化策略,通过仿真实验得到了特定区域的最优通信节点数和节点部署位置图。     

学员心理健康状况的调查与分析

为了进一步在教学中实施心理健康教育及心理干预,笔者对武警学院2003级学员的心理健康状况进行了调查。结果发现,武警学院学员在人际关系、偏执和精神病性因子上显著低于军队常模,在躯体化、焦虑、精神病性因子上显著高于地方常模,人际关系、抑郁、敌对因子上显著低于地方常模。分析研究学员心理健康状况,对于学员的健康成长具有重要意义。     

箔条质心干扰与舰空导弹综合反导兼容性研究

为从战术角度解决舰载箔条质心干扰和舰空导弹综合反导过程中存在的互扰问题,从理论角度对兼容反导可行性进行了探讨,其中着重就综合反导空域兼容进行建模判定,得出了空域兼容性分析的一般方法,并结合不同作战环境和舰艇机动情况对该方法进行仿真试验,得出了箔条质心干扰和舰空导弹反导战术兼容使用原则和结论.     

轮式装甲车辆的几何通过性建模与仿真

介绍了轮式装甲车辆通过障碍物的规则,分析了几何障碍物属性和通过判断条件,针对几何障碍物属性,提出了几何障碍物的通过算法,建立了几何通过性模型。采用VC＋＋编程对模型进行了仿真,通过仿真实验验证了算法和模型的可行性。     

美国地理空间情报数据获取能力及启示

地理空间情报使用影像、影像情报和地理空间信息,解释、审查和直观地表示地理特征和活动.美军通过地理空间情报提供的战场信息,可以更高效地进行指挥控制和实施作战行动,以支持国家安全、国家政策、作战部署等不同层次的战略和战术需求,实现战场上的信息优势.美军在战场上形成的地理空间情报优势,离不开多年来美国在地理空间情报领域探索实践中形成的先进发展理念与能力建设.对美国地理空间情报数据的获取能力进行分析,为我国地理空间情报数据建设提供参考.     

Repeater jamming suppression method for pulse Doppler fuze based on identity recognition and chaotic encryption

Pulse Doppler (PD) fuze is widely used in current battlefield. However, with the threat of repeater jamming, especially digital radio frequency memory technology, the deficiency in the anti-repeater jamming of a traditional PD fuze increasingly emerges. Therefore, a repeater jamming suppression method for a PD fuze based on identity (ID) recognition and chaotic encryption is proposed. Every fuze has its own ID which is encrypted with different chaotic binary sequences in every pulse period of the transmitted signal. The thumbtack-shaped ambiguity function shows a good resolution and distance cut-off characteristic. The ability of anti-repeater jamming is emphatically analyzed, and the results at different signal-to-noise ratio (SNR) show a strong anti-repeater jamming ability and range resolution that the proposed method possesses. Furthermore, the anti-repeater jamming ability is influenced by processing gain, bit error rate (BER) and correlation function. The simulation result validates the theo-retical analysis, it shows the proposed method can significantly improve the anti-repeater jamming ability of a PD fuze.     

武器装备测试系统建设与发展

武器系统在装备部队使用之前,都要经过长时间反复、严格的性能检测和试验,以确保武器系统的先进性和精确性。简要介绍了武器装备测试系统建设概况,阐述了新型武器系统的特点以及对测试系统的要求,重点说明了武器装备测试系统的未来发展重点以及相关的测试系统理论与技术。