多自由度系统及结构非线性自由振动的摄动谐波平衡法

本文在谐波平衡法的基础上,引入摄动的思想,得出了解多自由度系统及结构的非线性自由振动的新方法。其解的形式为小参数和谐波的级数形式,因此,其解不会遗漏任何项,方程为线性的代数方程;利用线性变换,将系数矩阵变换为对角阵,一旦求出线性模态,就可得其解,比线性化迭代法优越得多。算例表明,本文方法对于小振幅有较高的精度,对于较大振幅其结果也是令人满意的。     

最小费用树

本文在赋边权w和顶点权θ的网络中,建立了最小费用树问题的网络模型。文中对问题的复杂性进行了讨论并给出了求解问题的算法     

随机环境中的M/MY/1排队系统

文献［４］讨论了随机环境中的Ｍ／Ｍ／１排队模型，本文提出和讨论随机环境中的Ｍ／Ｍｙ／１排队模型，在统计平衡条件下给出了队长和等待队长的平稳分布以及平均队长和平均等待队长，得到了等待时间和逗留时间分布以及平均等待时间和平均逗留时间。     

浅析以法律形式控制网络军备竞赛的必要性

网络战是近年来全球军事界相当热的话题,其作为一种全新概念的组织机构,已经开始登上了军事舞台。美国、韩国等国家先后宣布组建网络司令部,引起了全球网络军备竞赛的热潮。文章探讨网络军备竞赛的发展现状和特点,分析以法律形式进行控制的必要性,能够全面系统的了解网络军备竞赛所带来的严重危害,为控制军备竞赛的对策和决策提供一些建议。     

微分方程的有界性与概周期解的存在性

本文考虑高维非自治概周期系统ｄｘｄｔ＝ｆ（ｔ,ｘ）,利用对ｘ的分量分组构造Ｌｉａｐｕｎｏｖ函数的方法讨论了其概周期解的存在性。所得结果去掉了文献中系统存在有界解的假设,得到了比较明显的改进。     

空间飞网系统牵拉模式影响研究

针对空间飞网系统任务设计需求,研究飞网牵拉模式对系统展开性能的影响。建立空间飞网系统拉出展开过程动力学模型,并通过地面试验对比验证了模型的有效性。面向任务需求建立空间飞网系统评价指标,针对四、六点牵拉模式,采用有限绳段方法对飞网系统进行建模仿真。模型中保持绳网质量和初始发射能量一致,对评价指标的分析结果表明,在六点牵拉模式下,飞网系统飞行性能指标和力学性能指标有明显提高,但能量利用率和系统可靠性小幅下降。     

采用小弹性模量方法的空间飞网构型优化设计

飞网构型设计对提高空间飞网系统的展开抓捕性能具有重要意义。用小弹性模量分析方法对空间飞网构型优化设计问题进行研究。以绳网中内力分布均衡性为优化目标,选取飞网抛射过程中最大受力时刻为研究工况,赋予绳索单元极小弹性模量,进行静力学计算,并以变形后的结果为初始条件进行迭代分析。优化结果表明,绳网中的内力分布随迭代步数的增加而更趋于均匀。在不改变绳网拓扑结构的前提下,所建立的优化设计方法为空间飞网构型优化设计提供了一种参考途径。     

Determination of burn‐in parameters and residual life for highly reliable products

Today, many products are designed and manufactured to function for a long period of time before they fail. Determining product reliability is a great challenge to manufacturers of highly reliable products with only a relatively short period of time available for internal life testing. In particular, it may be difficult to determine optimal burn‐in parameters and characterize the residual life distribution. A promising alternative is to use data on a quality characteristic (QC) whose degradation over time can be related to product failure. Typically, product failure corresponds to the first passage time of the degradation path beyond a critical value. If degradation paths can be modeled properly, one can predict failure time and determine the life distribution without actually observing failures. In this paper, we first use a Wiener process to describe the continuous degradation path of the quality characteristic of the product. A Wiener process allows nonconstant variance and nonzero correlation among data collected at different time points. We propose a decision rule for classifying a unit as normal or weak, and give an economic model for determining the optimal termination time and other parameters of a burn‐in test. Next, we propose a method for assessing the product's lifetime distribution of the passed units. The proposed methodologies are all based only on the product's initial observed degradation data. Finally, an example of an electronic product, namely contact image scanner (CIS), is used to illustrate the proposed procedure. © 2002 Wiley Periodicals, Inc. Naval Research Logistics, 2003     

Estimating failure time distribution and its parameters based on intermediate data from a Wiener degradation model

Instead of measuring a Wiener degradation or performance process at predetermined time points to track degradation or performance of a product for estimating its lifetime, we propose to obtain the first‐passage times of the process over certain nonfailure thresholds. Based on only these intermediate data, we obtain the uniformly minimum variance unbiased estimator and uniformly most accurate confidence interval for the mean lifetime. For estimating the lifetime distribution function, we propose a modified maximum likelihood estimator and a new estimator and prove that, by increasing the sample size of the intermediate data, these estimators and the above‐mentioned estimator of the mean lifetime can achieve the same levels of accuracy as the estimators assuming one has failure times. Thus, our method of using only intermediate data is useful for highly reliable products when their failure times are difficult to obtain. Furthermore, we show that the proposed new estimator of the lifetime distribution function is more accurate than the standard and modified maximum likelihood estimators. We also obtain approximate confidence intervals for the lifetime distribution function and its percentiles. Finally, we use light‐emitting diodes as an example to illustrate our method and demonstrate how to validate the Wiener assumption during the testing. © 2008 Wiley Periodicals, Inc. Naval Research Logistics, 2008     

武器系统作战模拟环境的设计与实现

针对当前武器系统作战模拟不易于使用的观状,探讨了建立武器系统作战模拟多媒体表现环境的概念、方法和必要性,从总体上研究了武器系统作战模拟多媒体表观环境的系统结构、功能要求和实现过程。