1949年中国共产党成功接管南京的历史过程及启示

1949年南京解放前后曾经历了近一年时间的接管期.这一历程可分为"迎接南京解放的斗争"和"全面实施接管"两个阶段.中国共产党对南京的成功接管,具有5个鲜明特点,充分揭示出一致律、结合律、协调律、适应律和互促律等"五律",对当今经济社会发展仍有借鉴意义.     

中等收入人口定位的收入比区间法

为准确定位中等收入人口,在分析洛伦兹曲线和贫富分界点的基础上,以人口收入占总收入比例来描述中等收入人口。提出了中等收入人口定位的收入比区间法,先利用非线性最小二乘拟合洛伦兹曲线,计算出贫富分界点,然后确定经过两极分化指数修正的中等收入比区间,进而计算中等收入水平及人口,给出了算法步骤。A,B两地区的定位结果表明,用收入比描述中等收入人口符合经济学规律,收入比区间法能有效定位和度量中等收入人口。全国城镇居民中等收入定位结果表明,中等收入人口的比例在下降,收入水平在增加,收入分配的公平性得到了改善。     

采用多敏感器相互校正的卫星入轨姿态计算方法

针对卫星与运载分离后,由于星上姿态测量敏感器未开机或不具备工作条件而无法获悉初始入轨姿态的问题,设计了采用多敏感器相互校正的入轨姿态计算方法。建立运动学方程,结合陀螺测量角速度信息和星敏感器首次测量有效姿态,采用信赖域方法进行非线性优化求解,由后向前反向推算姿态;提出一种由模拟太阳敏感器测量对日姿态到对地姿态转化的便捷方法,由模拟太阳敏感器测量对日信息,采用本体系太阳矢量与星敏感器测量信息建立联系,达到了利用太阳敏感器测量信息校正星敏感器推算姿态的目的,最终得到的星箭分离时卫星姿态信息能够与运载方信息吻合。将入轨后卫星真实姿态与地面模型仿真结果对比,验证了模型的正确性,为后续卫星设计和飞行程序设计与改进提供了重要依据。     

PID调节下H桥式逆变器离散建模及分岔现象

为研究PID调节下H桥式逆变器的非线性行为,选取逆变器输入电压为分岔参数,利用频闪映射法推导出PID调节下H桥式逆变器的离散数学模型.使用Matlab编程得到系统输出电流随输入电压变化的动态分岔图,通过数值仿真验证了离散数学模型的正确性.仿真结果表明频闪映射法适用于建立H桥式逆变器的离散数学模型;PID调节下H桥式逆变器存在分岔行为.研究结果可为建立PID调节下H桥式逆变器的离散数学模型提供参考.     

基于改进March SS算法的存储器测试技术研究

摘要：针对存储器的特点,介绍了存储器简化的功能故障模型．基于一种既可以测试静态简化故障又可以测试动态简化故障的MarchSS算法,提出了一种改进的存储器测试算法MarchSSI算法．该算法不仅能测出MarchSS算法测试的所有功能故障,而且能够覆盖MarchSS算法遗漏的故障,使算法故障覆盖率有了一定的提高．通过仿真,验证了算法的可行性．     

水面光电探测技术研究进展分析与展望

文章围绕水面光电探测技术,对该技术的内涵特点、适用范围以及主要用途进行了概括介绍．对近些年来国外在水面光电探测技术方面的发展进行了梳理,分析列举了光电探测技术发展的若干趋势,并分析了目前国内外技术间存在的差距,最后对发展我军水面光电探测技术值得重点关注的研究方向进行了分析并提出了自己的建议。     

基于云重心方法的海战场环境评估

针对当前海战场环境评估方法存在的问题与不足,引入云理论对其进行科学评估。首先,对云模型和云重心的评判步骤进行阐述。然后,建立海战场环境的云模型和评价指标体系,算出加权偏离度θ。最后,将结果输入云发生器得出评价结果。实验结果表明,该方法简单易行,可操作性强,为海战场环境评估提供了一种较好的途径。     

Effects of total pressures and equivalence ratios on kerosene/air rotating detonation engines using a paralleling CE/SE method

In this paper, the kerosene/air rotating detonation engines(RDE) are numerically investigated, and the emphasis is laid on the effects of total pressures and equivalence ratios on the operation characteristics of RDE including the initiation, instabilities, and propulsive performance. A hybrid MPI + OpenMP parallel computing model is applied and it is proved to be able to obtain a more effective parallel performance on high performance computing(HPC) systems. A series of cases with the total pressure of 1 MPa, 1.5 MPa, 2 MPa, and the equivalence ratio of 0.9, 1, 1.4 are simulated. On one hand, the total pressure shows a significant impact on the instabilities of rotating detonation waves. The instability phenomenon is observed in cases with low total pressure (1 MPa) and weakened with the increase of the total pressure. The total pressure has a small impact on the detonation wave velocity and the specific impulse. On the other hand, the equivalence ratio shows a negligible influence on the instabilities, while it affects the ignition process and accounts for the detonation velocity deficit. It is more difficult to initiate rotating detonation waves directly in the lean fuel operation condition. Little difference was observed in the thrust with different equivalence ratios of 0.9, 1, and 1.4. The highest specific impulse was obtained in the lean fuel cases, which is around 2700 s. The findings could provide insights into the understanding of the operation characteristics of kerosene/air RDE.     

Delamination process in cross-ply UHMWPE laminates under ballistic penetration

Cross-ply unidirectional laminates made of ultra-high molecular weight polyethylene fibers are widely used as components of bullet-proof vests. To simulate the delamination process of the material under penetration, we constructed a numerical mechanical model, which was validated by tests using 7.62 × 39 mm rifle bullets penetrating laminates of different thicknesses. The results show that the delamination region is essentially diamond-shaped. The simulated delamination region is in good agreement with the experimental data. It is found that the delamination region increases with the compression modulus along the fiber direction. The delamination region increases when the shear strength between the fabric layers decreases;However, it is little influenced by the normal strength. The delamination region of the front face of the laminate is little influenced by the failure strain of the material and the initial velocity of the bullet. The delamination region of the back face increases with the failure strain and decreases with the initial velocity.     

Numerical and experimental study on the response characteristics of warhead in the fast cook-off process

The response characteristics of the warhead under thermal stimuli conditions are important to the safety improvement. The goal of this study is to obtain data on the warhead in the fast cook-off process. In this paper, a numerical calculation method is proposed, whose reliability is supported by comparison with experimental results. Through the numerical calculation, the temperature distribution, temperature change, and ignition time are acquired. The numerical results show that the ignition time is 76 s after the warhead started to burn and that the maximum temperature of the explosive's outer surface is 238.3 C at the ignition time. The fast cook-off experiment of the warhead is implemented so as to get the flame temperature and reaction grades that are not available through numerical calculation. The experimental results show that the overpressure fails to reach the preset minimum value which is equivalent to 6 kg of TNT and that the reaction grade is deflagration. The research results have reference value for the design of the warhead and the reduction of detonation risks.