复合材料修补金属裂损结构吸湿老化的试验与有限元分析

暴露在湿热环境中的复合材料修补金属裂损结构易吸湿老化,导致该结构性能下降,服役寿命缩短。为研究吸湿性对复合材料修补金属裂损结构修补效果和耐久性的影响,利用试验方法分析了吸湿性对复合材料胶补金属裂损结构及胶黏剂力学性能的影响;利用有限元方法评估了吸湿性对复合材料胶补金属裂损结构试验件修补效果和耐久性的影响。研究结果表明:吸湿后含穿透双边裂纹铝合金板玻璃纤维单面胶补试验件的疲劳裂纹扩展寿命和极限载荷的平均值分别下降为吸湿前的71%和90%;吸湿造成拉伸条件下复合材料胶补金属裂损结构胶层失效模式由内聚破坏为主转变为界面破坏为主;在"湿-热"老化30天后,E44/聚酰胺环氧树脂胶黏剂试验件吸水饱和,弹性模量下降为未老化前的40%,塑性应变超过了总应变的25%;有限元分析发现胶层损伤受吸湿影响明显,吸湿性加速了胶层损伤,且裂纹长度越长,加速作用越明显;同时吸湿使得裂纹尖端的J积分值急剧增大,导致修补结构的疲劳裂纹扩展寿命缩短,裂纹长度越长,吸湿性对于复合材料胶接修补效果的危害越严重。     

空降车着陆缓冲过程车体动态应力仿真研究

为了研究空降车着陆缓冲过程车体结构冲击响应,建立了车体有限元模型,运用显式有限元方法,结合实车空投试验的冲击加速度数据,以力的形式模拟车体着陆缓冲过程所受的冲击,仿真得到普通、恶劣和极限3种工况下着陆缓冲过程车体应力分布。结果表明:在3种着陆工况下,空降车左后立柱底端均为应力最大位置。研究结果可为空降车空投寿命预测及装备保障提供依据。     

Exact analysis of (R,s, S) inventory control systems with lost sales and zero lead time

We study an (R, s, S) inventory control policy with stochastic demand, lost sales, zero lead‐time and a target service level to be satisfied. The system is modeled as a discrete time Markov chain for which we present a novel approach to derive exact closed‐form solutions for the limiting distribution of the on‐hand inventory level at the end of a review period, given the reorder level (s) and order‐up‐to level (S). We then establish a relationship between the limiting distributions for adjacent values of the reorder point that is used in an efficient recursive algorithm to determine the optimal parameter values of the (R, s, S) replenishment policy. The algorithm is easy to implement and entails less effort than solving the steady‐state equations for the corresponding Markov model. Point‐of‐use hospital inventory systems share the essential characteristics of the inventory system we model, and a case study using real data from such a system shows that with our approach, optimal policies with significant savings in inventory management effort are easily obtained for a large family of items.     

俄罗斯军事人才生成机制对武警视级指挥院校任职教育的启示

俄罗斯军事教育注重培养学员的国家意识，强调教员必须具有很强的综合能力，教学方法灵活、实用，考试方法突出能力素质的考核。俄罗斯军事人才培养形成了注重实战演练、坚持岗位轮换、引进竞争机制、重视鉴定考核的良性机制，保证了人才培养的质量。武警部队初级指挥院校提高任职教育质量应借鉴俄罗斯军事人才培养方法，在培训内容、教员选拔、授课方法、考试形式等方面进行改革。     

多约束下的高超声速飞行器三维非线性自适应末制导律

面向多约束下高超声速飞行器末制导过程中的通道耦合、参数扰动、模型失配等突出问题,设计一种适于高超声速飞行器的三维非线性自适应末制导律。为了模型描述的完整性和简洁性,引入视线旋量和旋量速度的概念,并基于此建立三维制导参考模型和实际系统的表达式;为了保证制导律的鲁棒性和自适应性,基于自适应控制理论,设计一种三维非线性自适应制导律;通过数学推导证明了该制导律的稳定性。该制导律能够从理论上克服高超声速飞行器末制导面临的通道耦合、参数扰动、模型失配等突出问题,满足多约束制导要求。仿真结果验证了所设计制导律的有效性。     

基于门限的无线传感器网络密钥管理方案

由于无线传感器网络在能量消耗、内存开销和计算能力等方面的局限性，传统的网络密钥管理方法已不适用。为此提出了一种适用于无线传感器网络的密钥预分配方法——基于（t，n）-门限方案，给出了密钥分配方法，并从方案的连通性、安全性等方面进行了有效的分析，结果表明该算法在这些方面有一定的优势。     

铝合金-纯铝-钢复合板爆炸焊接试验及性能研究

通过设计爆炸焊接试验复合了铝合金-纯铝-钢爆炸复合板,对其界面形态、显微硬度及力学性能进行了研究。结果表明,铝合金-纯铝界面纯规则正弦波形,纯铝-钢复合板界面波形较小,铝合金-纯铝-钢复合板的界面剪切强度在75 MPa以上,爆炸复合过程中,纯铝与钢界面生成了金属间化合物,其界面处基体金属发生强烈的塑性变形。复合板变形及组织变化的结果造成复合板界面处的显微硬度最高,随着距界面距离的增加,两侧基体金属的硬度逐渐降低。     

Dynamic signatures and their use in comparing the reliability of new and used systems

The signature of a system with independent and identically distributed (i.i.d.) component lifetimes is a vector whose ith element is the probability that the ith component failure is fatal to the system. System signatures have been found to be quite useful tools in the study and comparison of engineered systems. In this article, the theory of system signatures is extended to versions of signatures applicable in dynamic reliability settings. It is shown that, when a working used system is inspected at time t and it is noted that precisely k failures have occurred, the vector s [0,1]^n‐k whose jth element is the probability that the (k + j)th component failure is fatal to the system, for j = 1,2,2026;,n ‐ k, is a distribution‐free measure of the design of the residual system. Next, known representation and preservation theorems for system signatures are generalized to dynamic versions. Two additional applications of dynamic signatures are studied in detail. The well‐known “new better than used” (NBU) property of aging systems is extended to a uniform (UNBU) version, which compares systems when new and when used, conditional on the known number of failures. Sufficient conditions are given for a system to have the UNBU property. The application of dynamic signatures to the engineering practice of “burn‐in” is also treated. Specifically, we consider the comparison of new systems with working used systems burned‐in to a given ordered component failure time. In a reliability economics framework, we illustrate how one might compare a new system to one successfully burned‐in to the kth component failure, and we identify circumstances in which burn‐in is inferior (or is superior) to the fielding of a new system. © 2009 Wiley Periodicals, Inc. Naval Research Logistics, 2009     

发动机粘接界面加速老化及寿命预测

介绍发动机粘接界面老化试验,根据其力学特性的变化,建立合适的数学模型,并估算出贮存寿命。