排序方式: 共有98条查询结果,搜索用时 468 毫秒
71.
以测时测距体制为基础的定位系统中,提高时间精确度是改善导航接收机性能的一个关键因素。然而,在便携或手持式导航设备中,现有的守时芯片难以在低功耗的条件下实现高计时精度。针对上述矛盾,本文提出了一种全新的守时芯片电路结构,通过直接温度补偿计时,以及低功耗连续工作和高功耗间歇突发工作相结合,实现了优于0.5ppm级别的守时精度和低于200μW待机功耗,可替换传统音叉型RTC芯片,提高便携或手持式导航设备性能。 相似文献
72.
本文用有限时间热力学与经济优化相结合的方法,导出q∝△(T)和q∝△(T-1)两种传热规律下,三热源热泵的最佳利润率、供热系数关系,得到最大利润率时的供热系数界限。 相似文献
73.
本文介绍一种严格判定非线性模型锁相环电路的稳定性方法──李雅普诺夫判据,给出了二阶、三阶非线性环的详细判定过程及设计原则,并对一些实际电路进行了讨论。 相似文献
74.
FE 模态计算中对螺栓联接结构的合理建模 总被引:2,自引:0,他引:2
分析了模态计算中螺栓联接结构的几种建模方法;对螺栓联接结构提出了一种新的合理建模的方法. 相似文献
75.
研究了用于复合材料板、壳结构分析的退化的等参壳元.数值计算结果表明,该单元不仅适合厚的和中厚的复合材料板、壳结构的分析,而且在采用了“节减积分”或“选择积分”技术之后,也同样适合复合材料薄板和薄壳的计算. 相似文献
76.
77.
《防务技术》2022,18(9):1513-1522
It is important to understand how ballistic materials respond to impact from projectiles such that informed decisions can be made in the design process of protective armour systems. Ballistic testing is a standards-based process where materials are tested to determine whether they meet protection, safety and performance criteria. For the V50 ballistic test, projectiles are fired at different velocities to determine a key design parameter known as the ballistic limit velocity (BLV), the velocity above which projectiles perforate the target. These tests, however, are destructive by nature and as such there can be considerable associated costs, especially when studying complex armour materials and systems. This study proposes a unique solution to the problem using a recent class of machine learning system known as the Generative Adversarial Network (GAN). The GAN can be used to generate new ballistic samples as opposed to performing additional destructive experiments. A GAN network architecture is tested and trained on three different ballistic data sets, and their performance is compared. The trained networks were able to successfully produce ballistic curves with an overall RMSE of between 10 and 20 % and predicted the V50 BLV in each case with an error of less than 5 %. The results demonstrate that it is possible to train generative networks on a limited number of ballistic samples and use the trained network to generate many new samples representative of the data that it was trained on. The paper spotlights the benefits that generative networks can bring to ballistic applications and provides an alternative to expensive testing during the early stages of the design process. 相似文献
78.
A stab-resistant substrate was designed and realized with a triangular pyramidal structure, inspired by the biological armor model in nature. The stab-resistance behavior and dynamic response mechanisms were studied through numerical simulation and experimental testing of a knife impacting a substrate, and an optimal structural design was obtained accordingly, with a tilted angle of 22.5° and optimal thickness of 1.2 mm. It was shown that the triangular pyramidal structure generated twice the internal energy of the knife than the flat substrate due to the dispersing effect of the structure. The force parallel to the inclination caused a significant scratch on the substrate surface, while the force perpendicular caused obvious substrate deformation. A new riveting method was used to form the total layer, which passed the GA 68—2008 standard. The stab-resistant clothing coupled with the reduced wearing burden could provide effective protection and avoid fatal injuries on security personnel working in dangerous environments. The method provided may enlighten the future design and manufacturing of stab-resistant clothing. 相似文献
79.
The tensile behaviour of near α Ti3Al2.5 V alloy, conceived for applications in aerospace and automotive engineering, is characterized from quasi-static to high strain rates. The material is found to present noticeable strain rate sensitivity. The dynamic true strain rate in the necking cross-section reaches values up to ten times higher than the nominal strain rate. It is also observed that beyond necking the dynamic true stress-strain curves present limited rate dependence. The experimental results at different strain rates are used to determine a suitable constitutive model for finite element simulations of the dynamic tensile tests. The model predicts the experimentally macroscopic force-time response, true stress-strain response and effective strain rate evolution with good agreement. 相似文献
80.
为了保证视线角速率在弹目碰撞前收敛到零附近的较小邻域内从而达到准平行接近的状态,本文基于自抗扰控制的不确定性估计补偿思想,应用反演控制方法设计了一种考虑导弹自动驾驶仪二阶动态特性和目标机动的三维有限时间收敛导引律。根据有限时间收敛控制理论,严格证明了系统的有限时间收敛特性;为抑制量测噪声,将传统跟踪微分器进行改进并应用于扩张状态观测器与反演控制的设计中。仿真结果表明:在自动驾驶仪响应延迟情况下,所设计的导引律能够导引导弹在有限时间内精确地拦截高速机动目标;改进的跟踪微分器精度高、响应快;基于改进跟踪微分器的扩张观测器估计效果理想。 相似文献