Research on a MEMS pyrotechnic with a double-layer barrier safety and arming device

As an essential component of ammunition, pyrotechnics can control ignition with high reliability. However, due to limits of fabrication technology, traditional pyrotechnics are bulky. To achieve both functionality and miniaturization, MEMS pyrotechnics integrate initiator, safety-and-arming (S&A) device and lead charge and keep all components within a small size. MEMS S&A devices, as the core component to ensure system safety, are difficult to achieve active and rapid response to control signals with high safety and reliability. In order to overcome the difficulty, we propose the design and characterization of a MEMS pyrotechnic with a double-layer barrier S&A device. The MEMS pyrotechnic is a high-integrated device with an overall size of 13.4 × 8.5 × 5.2 mm³. The initiator is a NiCr bridge foil covered with an Al/CuO energetic film, which can generate flame when ignited by an excitation voltage. To match the flame energy, lead styphnate is chosen in this study as the lead charge. The S&A device contains four semi-circular barriers, which are directly driven by V-shape electro-thermal actuators to gain active control of the pyrotechnics' ignition condition with rapid response. To improve the system's reliability, the four barriers are axisymmetrically placed in two layers, two barriers for each layer, to constitute a double-layer structure with a thickness of 100 μm. The ignition test results show that the S&A device can prevent the initiator from detonating the lead charge in safety condition. In arming condition, the lead charge will be detonated.     

Research on design and firing performance of Si-based detonator

For the chip integration of MEMS (micro-electromechanical system) safety and arming device, a miniature detonator needs to be developed to reduce the weight and volume of explosive train. A Si-based micro-detonator is designed and fabricated, which meets the requirement of MEMS safety and arming device. The firing sensitivity of micro-detonator is tested according to GJB/z377A-94 sensitivity test methods: Langlie. The function time of micro-detonator is measured using wire probe and photoelectric transducer. The result shows the average firing voltage is 6.4 V when the discharge capacitance of firing electro-circuit is 33 μF. And the average function time is 5.48 μs. The firing energy actually utilized by Si-based micro-detonator is explored.     

微加速度计研究的进展

介绍了微加速度计的基本原理以及国内外常见的各种微加速度计的结构形式,包括压电式、电容式、扭摆式、隧道式等,分析了这些传感器的基本特点,总结微加速度计发展中存在的一些问题,并提出一些解决关键问题的措施,预测微加速度计未来的发展趋势。     

Research on fuze microswitch based on corona discharge effect

Abnormal voltages such as electrostatic, constant current, and strong electromagnetic signals can erro-neously trigger operation of MEMS pyrotechnics and control systems in a fuze, which may result in casualties. This study designs a solid-state micro-scale switch by combining the corona gas discharge theory of asymmetric electric fields and Peek's Law. The MEMS switch can be transferred from "off" to"on" through the gas breakdown between the corona electrodes. In the model, one of the two electrodes is spherical and the other flat, so a non-uniform electric field is formed around the electrodes. The theoretical work is as follows. First, the relation among the radius of curvature of the spherical electrode, the discharge gap, and the air breakdown voltage is obtained; to meet the low voltage (30-60 V) required to drive the MEMS switch, the radius of curvature of the spherical electrode needs to be 10-50 μm and the discharge gap between the two electrodes needs to be 9-11 μm. Second, the optimal ratio ε is introduced to parameterize the model. Finally, the corona discharge structural parameters are determined by comparing the theoretical and electric field simulation results. The switch is then fabricated via MEMS processing. A hardware test platform is built and the performing chip tested. It is found that when the electrode gap is 9 μm, the electrostatic voltage is at least 37.3 V, with an error of 2.6% between the actual and theoretical air breakdown voltages. When the electrode gap is 11 μm, the electrostatic voltage is at least 42.3 V, with an error of 10.5% between the actual and theoretical air breakdown voltages. Both cases meet the design requirements.     

弹药弹体尺寸自动测量系统

在对某系列特种弹药的弹体结构尺寸分析和归类的基础上,详细阐述了弹体几何尺寸的测量原理,并结合工厂的实际,采用激光位移传感器和计算机自动控制技术,实现了弹体的关键尺寸的数字化测量与评价。实际应用表明该系统可以有效地提高弹体尺寸的测量精度并定量评价弹体的尺寸误差,内外径和同轴度的测量精度可达10μm以内,外长的测量精度可达100μm以内,能有效地指导加工的工艺流程和加工的尺寸精度控制。     

传感器组网的关键技术

传感器组网是协同作战的关键技术,从作战的动态过程角度看,传感器组网是以特定战术任务为目标,在通信技术和计算机技术支持下的战术决策。从完成特定战术任务的能力角度看,传感器管理技术、通信技术、信息融合技术以及计算机技术是影响传感器网络性能的关键因素。     

多传感器数据融合系统的数据库

以数据库对融合算法的支持为线索 ,以数据融合数据库的全面设计为目标 ,注意面向特征的考虑数据表征形式和组织结构 ,结合整个融合算法的性能要求分析数据库的设计基本理论。首先讨论了数据融合对于数据库的要求 ,总结和归纳了数据融合中涉及到的多种数据形式 ,明确了数据的特征 ,然后 ,分析了常用的几种数据库管理系统模式 ,为数据库系统实现提供依据 ,保证在现存应用软件基础上合理选择实现方案 ;最后 ,集中介绍了融合数据库的设计 ,从总体框架、组织结构、数据结构及实现流程等方面给数据库的设计作了简要的介绍 ,并且提取上述分析中的结论性内容 ,给出合理的融合数据设计建议     

Performances and direct writing of CL-20 based ultraviolet curing explosive ink

A new type of explosive ink formulation that can be quickly cured was prepared with unsaturated polyester as binder,styrene as active monomer,2,4,6-trimethylbenzoyl-diphenylphosphine oxide as photoinitiator,and hexanitrohexaazaisowurtzitane (CL-20) as the main explosive.Then the explosive ink direct writing technology was used to charge the micro-sized energetic devices,the curing mechanism of the explosive ink was discussed,and the microstructure,safety performance and explosive transfer performance of the explosive ink molded samples were tested and analyzed.Results indicate that the composite material has a fast curing molding speed,its hardness can reach 2H within 8 min.The crystal form of CL-20 in the molded sample is still ε type.The CL-20 based W-curing explosive ink formulation has good compatibility,its apparent activation energy is increased by about 3.5 kJ/mol.The composite presents a significant reduction in impact sensitivity and its characteristic drop height can reach 39.8 cm,which is about 3 times higher than the raw material.When the line width of charge is 1.0 mm,the critical thickness of the explosion can reach 0.015 mm,and the explosion velocity is 7129 m/s when the charge density is 1.612 g/cm3.     

无监督特征学习的人体活动识别

针对人的局限性可能会导致在提取特征中丢失重要信息,从而影响最终的识别效果问题,提出无监督特征学习技术的惯性传感器特征提取方法。其核心思想是使用无监督特征学习方法学习多个特征映射,再将所有特征映射拼接起来形成最终的特征计算方法。其优点是不会造成重要信息的损失,而且可以显著减少所使用的无监督特征学习模型的规模。为了验证所提出的特征提取方法在活动识别中的有效性,运用一个公开的活动识别数据集,使用三种常用无监督模型进行特征提取,并使用支持向量机进行活动识别。实验结果表明,特征提取方法取得了良好的效果,与其他方法相比具有一定的优势。     

MEMS磁力线聚集和垂动调制磁场传感器

针对巨磁阻和磁隧道结等磁阻元件的1/f噪声,提出一种采用微机电系统的磁力线聚集和垂动调制磁场传感器。通过将被测磁场从低频转移到几kHz,实现对磁场的DC/AC转化,从而减小了磁阻元件的1/f噪声。基于该方案采用多层膜巨磁阻元件AA002制作了磁场传感器样品,并进行了实验测试,结果表明:磁传感器样品的调制效率达到了19.3%,超过了已有的其他各种调制方案,同时低频磁场的探测能力达到槡120pT/Hz,相比巨磁阻元件AA002提高了40多倍。