Preparation and characterization of HMX/NH2-GO composite with enhanced thermal safety and desensitization

To improve the safety of HMX, HMX/NH₂-GO composite was prepared with aqueous ammonia functionalized graphene oxide (NH₂-GO). The composite was characterized by SEM, Zeta potential, XPS, Raman spectrum, XRD, HPLC, DSC and BAM sensitivity test. The results indicated that the functionalization with aqueous ammonia can enhance the interaction between GO and HMX, and more efficiently desensitize the explosive. The optimal impact sensitivity of the HMX/NH₂-GO composite can be not less than 40 J, which is also the most insensitivity compared to the previous reports prepared by coating desensitization with non-energetic desensitized material. Moreover, the potential reason for the different impact and friction sensitivity was also discussed, which may bring a novel perspective to achieve the desensitization of energetic material.     

Influence of Al2O3 particles on the microstructure and mechanical properties of copper surface composites fabricated by friction stir processing

The influence of three factors, such as volume percentage of reinforcement particles (i.e. Al₂O₃), tool tilt angle and concave angle of shoulder, on the mechanical properties of Cu–Al₂O₃ surface composites fabricated via friction stir processing was studied. Taguchi method was used to optimize these factors for maximizing the mechanical properties of surface composites. The fabricated surface composites were examined by optical microscope for dispersion of reinforcement particles. It was found that Al₂O₃ particles are uniformly dispersed in the stir zone. The tensile properties of the surface composites increased with the increase in the volume percentage of the Al₂O₃ reinforcement particles. This is due to the addition of the reinforcement particles which increases the temperature of recrystallization by pinning the grain boundaries of the copper matrix and blocking the movement of the dislocations. The observed mechanical properties are correlated with microstructure and fracture features.     

舰艇编队协同反导队形配置优化研究

随着舰艇编队网络中心作战模式的产生与发展,其队形配置问题必须重新给予考虑。首先介绍了网络化反导作战系统的远程数据作战能力;其后,从指挥通信、火力掩护和一次耦合杀伤区3个方面给出舰舰间距的约束条件,以远程数据作战条件下编队舰空导弹杀伤区增量最大为优化目标,建立编队舰舰间距优化模型,并在此基础上结合电子干扰的要求,给出了编队队列角的最优范围解算方法;最后,在一定的战场假设下,通过示例的方式对模型的有效性与适应性进行了验证。     

基于AHP与熵权的舰艇编队信息作战能力模糊综合评估

在确立了舰艇编队信息作战能力评估指标体系的基础上,运用AHP和熵权法,得到评价指标的综合权重.通过模糊综合评判,得出综合评判总分.以舰艇编队的信息侦察处理能力为例进行综合评估.最后通过进一步研究分析,构建了一种数学模型,用于找出影响舰艇编队信息作战能力的薄弱指标.     

箔条干扰条件下舰空导弹单发杀伤概率计算

目前,对导弹抗干扰能力的要求越来越高,干扰条件下的导弹单发命中概率已成为评定导弹性能的重要指标.针对箔条干扰条件下舰空导弹单发杀伤概率评定,建立了雷达导引头接收端信干比模型、舰空导弹圆目标落入概率模型以及抗干扰改善因子模型,从而构建了箔条干扰条件下舰空导弹单发命中概率模型,计算出真实有效的单发命中概率.     

离散变速趋近律抖振机理及鲁棒性研究

研究基于离散变速趋近律的变结构控制设计问题.利用不等式形式到达条件研究变速趋近律的抖振机理,并对其鲁棒性进行分析.研究结果表明,只要不确定因素有界,即可保证闭环系统的鲁棒稳定性,而通过调整变速趋近律自身参数,可以避免抖振并使系统具有良好的动态品质.将理论成果用于某型船舶航向自动舵的设计,实验结果证实了它的有效性.     

SWATH船纵向运动性能分析

根据切片理论编制了SWATH船在规则波及不规则波中的纵向运动理论预报程序.分析了航速对SWATH船在不规则波中迎浪纵向运动响应的影响规律.并研究了鳍的位置、尺度、组合形式对SWATH船纵向运动性能的影响.结果表明,中高速航行有利于发挥SWATH船优越的耐波性;增大鳍的尺度、使用艏艉组合鳍能提高SWATH船在不规则波中的纵向运动性能.     

模块化设计思想在战时民船征用改造成维修保障船中的应用

对模块化设计思想在战时民船征用改造成维修保障船中的应用作了有益探讨,对战时民船征用改造成维修保障船的必要性进行了论证。并以集装箱船为例,充分论证了在战时应用模块化设计思想把民船改造成维修保障船的优势所在,进而对改装初步方案进行了论证设计。对战时开展民船征用改造成维修保障船工作,及拓展战时装备保障思路,有一定的参考价值。     

灰色综合评判模型的改进

方案的综合评判要求评价指标的"功能性"与"均衡性"并重,而现有模型很少能体现评价指标"功能性"与"均衡性"的统一.为此,笔者提出了通过增加距离项改进灰色综合评判模型,并给出了一个应用实例.结果表明:通过改进,有效地解决了方案"功能性"与"均衡性"的兼顾问题,能够合理地对方案作出评价.     

箔条质心干扰与舰空导弹综合反导兼容性研究

为从战术角度解决舰载箔条质心干扰和舰空导弹综合反导过程中存在的互扰问题,从理论角度对兼容反导可行性进行了探讨,其中着重就综合反导空域兼容进行建模判定,得出了空域兼容性分析的一般方法,并结合不同作战环境和舰艇机动情况对该方法进行仿真试验,得出了箔条质心干扰和舰空导弹反导战术兼容使用原则和结论.