位置修正技术在航位推算中的应用

利用图解法证明了航位推算轨迹和真实轨迹相似,符合相似性原理,并通过图解法推导位置修正公式;将位置修正技术用于里程仪的初始标定,经实测数据证明标定后的航向安装偏差角、俯仰安装偏差角及里程仪刻度系数误差大幅减小;将位置修正技术与GPS结合进行GPS/DR组合导航,经Matlab仿真证明该组合导航在长距离行车可将航向误差角限制在3.6′之内;该修正技术具有较高的实际应用价值。     

A partial characterization of the optimal ordering/rationing policy for a periodic review system with two demand classes and backordering

We consider a finite horizon periodic review, single product inventory system with a fixed setup cost and two stochastic demand classes that differ in their backordering costs. In each period, one must decide whether and how much to order, and how much demand of the lower class should be satisfied. We show that the optimal ordering policy can be characterized as a state dependent (s,S) policy, and the rationing structure is partially obtained based on the subconvexity of the cost function. We then propose a simple heuristic rationing policy, which is easy to implement and close to optimal for intensive numerical examples. We further study the case when the first demand class is deterministic and must be satisfied immediately. We show the optimality of the state dependent (s,S) ordering policy, and obtain additional rationing structural properties. Based on these properties, the optimal ordering and rationing policy for any state can be generated by finding the optimal policy of only a finite set of states, and for each state in this set, the optimal policy is obtained simply by choosing a policy from at most two alternatives. An efficient algorithm is then proposed. © 2010 Wiley Periodicals, Inc. Naval Research Logistics, 2010     

一种运用遗传算法确定船舶航向控制模糊规则的方法

为了克服船舶航向控制模糊规则确定过程中的盲目性,引入一种与之相适应的遗传算法,以使结果成为某种意义下的最优解,从而从根本上解决这一重要问题.文中运用Matlab的C语言MEX-文件技术,将遗传算法源代码与Matlab直接结合起来,利用后者的强大建模能力,建立起完整的仿真模型.仿真结果表明,船舶的航向控制能力得到明显改善.     

0.18 μm CMOS工艺的GPS/BDS双模可重构接收机射频前端

采用低中频架构设计了一种0.18μm CMOS工艺的GPS/BDS双模可重构接收机射频前端,能在GPS L1模式或BDS B1模式下工作。通过频率自适应电路调整中频滤波器的时间常数,降低其频率不确定度;压控振荡器中加入4位开关电容阵列,以提高频率调谐范围和相位噪声性能;通过硬件复用的方式降低系统功耗。测试结果表明,在1.8 V电源电压下,功耗37.8 m W,电压增益为103 d B,GPS L1和BDS B1波段噪声系数均小于3.2 d B。     

Value management of diagnostic equipment with cancelation,no‐show,and emergency patients

Magnetic resonance imaging and other multifunctional diagnostic facilities, which are considered as scarce resources of hospitals, typically provide services to patients with different medical needs. This article examines the admission policies during the appointment management of such facilities. We consider two categories of patients: regular patients who are scheduled in advance through an appointment system and emergency patients with randomly generated demands during the workday that must be served as soon as possible. According to the actual medical needs of patients, regular patients are segmented into multiple classes with different cancelation rates, no‐show probabilities, unit value contributions, and average service times. Management makes admission decisions on whether or not to accept a service request from a regular patient during the booking horizon to improve the overall value that could be generated during the workday. The decisions should be made by considering the cancelation and no‐show behavior of booked patients as well as the emergency patients that would have to be served because any overtime service would lead to higher costs. We studied the optimal admission decision using a continuous‐time discrete‐state dynamic programming model. Identifying an optimal policy for this discrete model is analytically intractable and numerically inefficient because the state is multidimensional and infinite. We propose to study a deterministic counterpart of the problem (i.e., the fluid control problem) and to develop a time‐based fluid policy that is shown to be asymptotically optimal for large‐scale problems. Furthermore, we propose to adopt a mixed fluid policy that is developed based on the information obtained from the fluid control problem. Numerical experiments demonstrate that this improved policy works effectively for small‐scale problems. © 2016 Wiley Periodicals, Inc. Naval Research Logistics 63: 287–304, 2016     

基于DSP+FPGA的导航计算机数据采集与处理硬件设计

根据捷联惯导系统中数据采集和运算处理的要求,提出了以高性能DSP为核心,由FPGA构成主要外部输入输出接口的导航计算机硬件设计方案;设计了I/F转换电路;给出了各电路的硬件结构框图和各器件的特性、选择与应用。从硬件方面分别讲述了FPGA和DSP的工作过程和功能。利用本方案,对实现军事和工程领域中导航系统微小型化、降低系统成本和体积具有重要意义。     

基于无线双工通信系统分组数据传输的探讨

分析了军用无线双工通信系统数据传输资源,指出了存在的问题及改进办法;利用话音、报文、传真、数据电路交换信令的工作模式标示,提出了基于无线双工通信系统的数据传输TCP/IP结构体系及协议栈,并探讨了网络适配和实现与军用公共数据网、地域通信网（电路交换网、分组交换网）、数字化部队单工无线电数据网互联的关键技术。     

基于察打任务的无人机作战效能评估

首先根据时敏目标打击的特点,分析了察打任务模式下的察打一体无人机的作战使用。然后对评估体系中察打一体无人机的侦察能力与打击能力相关性进行了分析,同时将任务可执行度作为无人机效能评估的一项动态权衡标准,建立了基于察打任务的无人机效能评估模型,并基于效能指标体系建立了各分项模型。最后通过算例验证了模型的可行性。     

一种新型混合跳频通信技术

文中提出了一种新型混合跳频通信技术,该技术结合传统跳频技术和差分跳频技术,在较窄的频带上采用差分跳频调制,并将该调制信号与另一更宽频带内的慢跳频信号进行混频,最终得到一个跳速高、频带宽的调制信号。接收端解调时,先按照传统跳频解调的方式进行慢跳频的解调,再按照差分跳频解调的方式对信号进行差分跳频解调。这种混合跳频通信技术在提高数据传输速率的同时,也可以很好地改善系统的误码率性能和抗单音干扰性能。     

某型非圆截面布撒器气动特性计算

飞机干扰条件下的非圆截面布撒器的气动力计算是新型航空布撒器研制中的关键技术之一.对伍德沃德提出的面元法加以改进,用改进的面元法计算了在飞机干扰下某型非圆截面布撒器的气动力,与无干扰条件下的计算结果进行了比较,并作了简要分析.