试件水灰比和胶砂比对混凝土硫酸盐侵蚀速度影响

通过大量试验,采用强度指标研究了试件水灰比和胶砂比对硫酸盐侵蚀速度的影响.结果表明:试件的水灰比越大,胶砂比越小,侵蚀速度越快;为了加快硫酸盐侵蚀速度,宜采用大水灰比、小胶砂比的试件.在各种条件下,硫酸钠侵蚀破坏的速度比硫酸镁侵蚀快.对硫酸钠型侵蚀,采用抗折抗蚀系数作为判定指标较为合理,而对硫酸镁型侵蚀,应该综合考虑抗折抗蚀系数和抗压抗蚀系数.     

高重合度人字齿轮传动动态性能优化设计

对人字齿轮传动进行高重合度设计的分析,基于人字齿轮副承载接触分析技术,针对人字齿轮传动中主动小齿轮轴向浮动安装的特点,综合考虑齿轮时变啮合刚度、啮合冲击激励及误差激励等因素的影响,采用集中质量法建立了考虑修形的人字齿轮副弯-扭-轴耦合非线性振动模型,推导了系统无量纲运动微分方程,求解得到齿轮传动系统的振动加速度。以齿轮的振动加速度均方根值为优化的目标函数,针对该类复杂实际工程优化设计中适应值计算费时的缺点,提出了一种改进的具有适应值预测机制的遗传算法,优化得到了人字齿轮的基本设计参数及修形参数,提高了计算效率,通过实例分析验证了该优化方法的有效性。对加工的人字齿轮在减振降噪试验台上进行带载试验,对比优化前后的噪音分贝值,进一步验证了该优化方法对齿轮副减振降噪具有一定作用。     

应用改进的线性预测算法构建虚拟阵的精确定向方法

为了克服传统线性预测(Linear Prediction,LP)算法在构建虚拟阵过程中存在预测误差容易累积的弊端,提出了一种能够更充分利用实阵信息量的改进LP算法来构建虚拟阵。采用实际基阵方法、传统LP虚拟阵方法和改进LP虚拟阵方法分别对假定基阵的波束性能进行计算机仿真及对湖试数据进行处理成像,研究结果表明,与传统LP方法相比,改进的LP方法能够有效地抑制波束旁瓣,进一步提高了基阵的角度分辨力和阵增益,将其运用于特定试验背景下的实际湖底目标声探测,方向分辨精度可提高75%。     

多点源交叉波束干涉效应特征分析

介绍多点源交叉波束通过干涉效应实现交汇空间功率合成的基本原理,根据空间功率合成机理,建立对功率合成效率、同相叠加点间距的计算机仿真,完成多点源交叉波束干涉效应特征分析,以此作为多点源交叉波束空间功率合成的评估依据。     

基于不同叶片数目比的烟气涡轮多叶片通道数值模拟

基于定常假设,利用混合平面模型传递级间参数,运用Fluent软件对不同静动叶片数目比下的烟气涡轮多叶片通道流场进行了数值计算,得到了温度、压力、出口速度和马赫数等参数的变化规律,绘制了不同静动叶片数目比下各种参数的体积加权平均XY图,并通过数值分析确定了静动叶片最佳数目比为50∶74,最佳静叶安装角为35°。结果表明:叶片数目增减和静叶安装角的变化对烟气涡轮整体性能的影响须考虑多种因素,并不能以单一参数的变化来决定最佳叶片数目和静叶安装角。该结论可为烟气涡轮现有装备的科学管理和技术改进提供理论依据。     

定向能武器技术的发展动向

随着激光、新材料、微电子、声光、电光等高技术的发展,利用各种束能产生强大杀伤威力的定向能武器已引起世界高度重视。定向能武器成为战场上高速移动目标的"克星",是能有效制敌的"杀手锏"装备,对未来作战样式和形态具有重要影响。文章系统分析了定向能武器的军事应用前景,详细剖析了世界定向能武器技术的研究进展及发展动向,给出了未来要大力发展的激光武器、高功率微波武器和粒子束武器关键技术,对于加快我军定向能武器装备发展,提升非对称制衡能力,具有十分重要的意义。     

一种锥比率数据包络分析模型及有关结论

本文研究一种锥比率数据包络分析模型,它既能反映各项输入或输出的相对重要性和对某些决策单元的偏好,又可单纯地评价决策单元间的相对技术有效性。本文着重讨论这一模型的DEA有效性与多目标规划非支配解的关系以及有效决策单元的存在性等问题,论证了有关结论。     

4点弯曲载荷作用下残余应力与弹性模量比对涂层/基体材料界面能量释放率的影响

采用有限元计算方法研究了在4点弯曲载荷作用下,残余应力、涂层与基体的弹性模量比(简称弹性模量比)对涂层/基体材料界面能量释放率及其相角的影响。结果表明:能量释放率随着残余拉应力、弹性模量比的增大而增大;能量释放率中的相角也随着残余拉应力的增大而增大,但并不敏感,其随着弹性模量比的增大而减小。研究结果可为评价涂层/基体材料界面结合性能提供理论依据,有助于深化对涂层/基体材料界面结合性能的认识。     

On the application and extension of system signatures in engineering reliability

Following a review of the basic ideas in structural reliability, including signature‐based representation and preservation theorems for systems whose components have independent and identically distributed (i.i.d.) lifetimes, extensions that apply to the comparison of coherent systems of different sizes, and stochastic mixtures of them, are obtained. It is then shown that these results may be extended to vectors of exchangeable random lifetimes. In particular, for arbitrary systems of sizes m < n with exchangeable component lifetimes, it is shown that the distribution of an m‐component system's lifetime can be written as a mixture of the distributions of k‐out‐of‐n systems. When the system has n components, the vector of coefficients in this mixture representation is precisely the signature of the system defined in Samaniego, IEEE Trans Reliabil R–34 (1985) 69–72. These mixture representations are then used to obtain new stochastic ordering properties for coherent or mixed systems of different sizes. © 2008 Wiley Periodicals, Inc. Naval Research Logistics, 2008     

Effect of particle gradation of aluminum on the explosion field pressure and temperature of RDX-based explosives in vacuum and air atmosphere

To optimize the energy output and improve the energy utilization efficiency of an aluminized explosive, an explosion device was developed and used to investigate the detonation pressure and temperature of R1 (Al6) aluminum powder and the aluminum powder particle gradation of R2 (Al6+Al13), R3 (Al6+Al24) and R4 (Al6+Al flake) in a confined space. By using gas chromatography, quantitative analysis and calculations were carried out to analyze the gaseous detonation products. Finally, the reaction ratios of the aluminum powder and the explosion reaction equations were calculated. The results show that in a confined space, the quasi-static pressures and equilibrium temperature of the aluminum powder in air are higher than in vacuum. In vacuum, the quasi-static pressures and equilibrium temperatures of the samples in descending order are R1>R3>R4>R2 and R3>R4>R1>R2, respectively. In air, the quasi-static pressures and equilibrium temperatures of the samples in descending order are R1>R2>R4>R3 and R1>R4>R2>R3, respectively. R4 (Al6+Al flake) and R3 (Al6+Al24) have relatively higher temperatures after detonation, which shows that the particle gradation method can enhance the reaction energy output of aluminum during the initial reaction stage of the explosion and increase the reaction ratio by 10.6% and 8.0%, respectively. In air, the reaction ratio of Al6 aluminum powder can reach as high as 78.16%, and the reaction ratio is slightly reduced after particle gradation. Finally, the reaction equations of the explosives in vacuum and in air were calculated by quantitative analysis of the explosion products, which provides a powerful basis for the study of RDX-based explosive reactions.