双向受载裂纹板的碳纤维复合材料补片的胶接修补分析

建立了碳纤维复合材料补片胶接修补双向受载裂纹板的3D有限元模型,分析了补片的单面胶接修补效果,探讨了补片材料、铺层顺序、补片长度及载荷比等对裂纹应力强度因子的影响规律。结果表明:复合材料补片的存在使裂纹板垂直裂纹方向载荷和平行裂纹板方向载荷发生耦合作用,从而影响补片修补效果。平行裂纹方向的压应力可降低裂纹尖端的应力集中因子,而拉应力可提高裂纹尖端的应力集中因子。     

建筑外保温系统消防安全问题及对策研究

近年来,我国与建筑外保温系统有关的火灾事故频发,引起了社会对建筑外保温系统及外保温材料防火问题的高度关注。在对常见建筑外保温材料的性能特点及外保温系统的做法进行归纳总结的基础上,分析了相关火灾危险性;针对存在的消防安全问题,从完善法规体系、促进新技术应用、加强政府监管、整治现有火灾隐患以及应急救援准备等方面提出了加强建筑外保温系统消防工作的对策。     

自动化电弧喷涂路径偏移间距的优化模型

基于电弧喷涂沉积丘的轮廓呈高斯分布的假设,并结合实验结果,建立了电弧喷涂沉积丘轮廓的数学模型,由此推导出了自动化喷涂过程中平行路径偏移间距这一重要参量的优化模型。该模型为合理规划自动化喷涂的路径提供了依据。     

地空导弹兵混编群作战仿真研究

应用离散事件动态系统仿真的基本理论,建立了地空导弹兵混编群作战过程仿真模型,并用Arena仿真平台实现了仿真。通过仿真实例,分析了不同空袭目标流密度和空袭目标采取低空突防时对目标突防概率的影响。仿真结果表明,在该实例中,增大空袭目标流密度对目标突防概率没有显著的影响,而采取低空突防对目标突防概率影响显著。最后,对仿真结果进行了分析,证明了仿真模型的有效性。     

新型钢-混凝土组合板的力学性能研究

以加劲肋形式、组合板厚度和栓钉布置为参数,进行了9块新型组合板的力学性能试验.试验结果表明,组合板的正截面承载力可按基于修正平截面假定的极限状态计算;组合板的跨中挠度,可在按现行规范计算的基础上,加上考虑界面滑移影响的附加变形值予以修正.     

聚碳硅烷纤维化学气相交联研究

以环己烯作为反应气氛,对聚碳硅烷(PCS)纤维进行了化学气相交联不熔化处理。与空气不熔化进行对比,研究了不熔化过程中PCS纤维的反应程度及凝胶含量的变化,并进行了元素分析和热重差热分析,初步探讨了PCS纤维环己烯化学气相交联反应的机理。结果表明,在环己烯气氛中,PCS分子结构中Si-H键的反应程度随不熔化温度的提高逐渐增加,相应地,PCS纤维的凝胶含量迅速提高直至不熔。环己烯受热后产生自由基,引发PCS分子中的Si-H和Si-CH3键断裂形成自由基,促进PCS分子间形成Si-CH2-Si结构而实现交联。     

Influence of thickness and projectile shape on penetration resistance of the compliant composite

The present study deals with development of conceptual proof for jute rubber basedflexible composite block to completely arrest the projectile impacting the target at high velocity impact of 400 m/s through numerical simulation approach using finite element (FE) method. The proposed flexible composite blocks of repeating jute/rubber/jute (JRJ) units are modelled with varying thickness from 30 mm to 120 mm in increments of 30 mm and impacted by flat (F), ogival (O) and hemispherical (HS) shaped projectiles. All the considered projectiles are impacted with proposed flexible composite blocks of different thicknesses and the penetration behaviour of the projectile in each case is studied. The penetration depth of the projectile in case of partially penetrated cases are considered and the effect of thickness and projectile shape on percentage of penetration depth is statistically analyzed using Tagu-chi's design of experiments (DOE). Results reveal that the though proposedflexible composite block with thickness of 90 mm is just sufficient to arrest the complete penetration of the projectile, considering the safety issues, it is recommended to use theflexible composite with thickness of 120 mm. The nature of damage caused by the projectile in the flexible composite is also studied. Statistical studies show that thickness of the block plays a prominent role in determining the damage resistance of the flexible composite.     

Fabrication and analysis of TIG welding-brazing butt joints of in-situ TiB2/7050 composite and TA2

Lightweight hybrid structures of Al MMCs and titanium alloy dissimilar materials have great prospect in the defence industry application. So, it is necessary to join Al MMCs with Ti metal to achieve this structural design. In this work, in-situ TiB2/7050 composite and TA2 were firstly attempted to join by TIG welding-brazing technique. The result was that the intact welding-brazing butt joint was successfully fabricated. The joint presents dual characteristics, being a brazing on TA2 side and a welding on TiB2/7050 side. At brazing joint side, ER4043 filler metal effectively wets on TA2 under TIG heating condition, and a continuous interfacial reaction layer with 1—3μm is formed at welded metal/TA2 interface. The whole interfacial reaction layers are composed of Ti(AlSi)3 intermetallic compounds (IMCs), but their morphologies at the different regions present obvious distinguishes. The microhardness of the reaction layers is as much as 141—190 HV. At welding joints side, the fusion zone appears the equixaed crystal structure, and the grain sizes are much smaller than those of welded metal, which is attributed to the effect of TiB2 particulates from the melted TiB2/7050 on acceleration formation and inhibiting growth for the new crystal nucleus. The tensile test results show that average tensile strength of the optimal welding-brazing joint is able to achieve 138 MPa. The failure of the tensile joint occurs by quasi-cleavage pattern, and the cracks initiate from the IMCs layer at the groove surface of TA2 and propagate into the welded metal.     

复合材料层合结构的非线性传热分析

基于一阶热层合理论,考虑材料非线性的影响,建立了复合材料层合结构非线性传热分析的热层合理论及其有限元方程.通过数值算例研究了材料非线性对反对称复合材料层合板瞬态温度场的影响.     

高含钛量碳化硅纤维的研制

本文采用一种聚钛硅氧烷与聚碳硅烷反应,制得了Ti/Si摩尔比为0.10的聚钛碳硅烷。该聚合物具有良好的成丝性与稳定性,经熔融纺丝,再经不熔化处理后,在氮气气氛保护下1300℃热处理后制得了高含钛量的碳化硅纤维。文中对聚钛硅氧烷的合成与结构,它与聚碳硅烷的反应过程及聚钛碳硅烷的热分解特性进行了分析与研究。