聚碳硅烷／二乙烯基苯快速升温裂解制备Cf/SiC复合材料

以聚碳硅烷(PCS)/二乙烯基苯(DVB)为先驱体,采用快速升温裂解制备了3D-B Cf/SiC复合材料.结果证明:裂解升温速率的提高可以大大缩短制备周期,同时可以提高材料密度和形成较好的界面结合,从而提高材料的力学性能.制备得到的Cf/SiC材料室温弯曲强度达到556.7MPa.     

聚碳硅烷先驱体交联后热处理对陶瓷转化的影响

将聚碳硅烷交联产物在裂解前,先在200～400℃进行不同温度下的热处理,研究其对陶瓷转化过程的影响。结果表明,经400℃/2h热处理后,其裂解产物的陶瓷产率达到73 9%;裂解产物结构的主要缺陷为气孔,而未经热处理样品裂解产物结构的主要缺陷为裂纹。如果用该结构的陶瓷为基体,可以减少纤维损伤。     

二价钴、镍氯化物的四齿N4大环席夫碱配合物的合成及表征

以Cocl_2·6H_2O和NiCl_2·6H_2O为模板剂,邻苯二胺和邻苯二醛为原料,在无水乙醇中模板合成了两种新型的大环席夫碱配合物。通过元素分析、摩尔电导和磁化率的测定,红外光谱、紫外可见光谱等项表征,确定了配合物的组成和结构,进而观察和研究了它们的电致变色现象,并对其电致变色机理进行了初步探讨。     

不同裂解温度对制备SiCf/Si-O-C复合材料性能研究

以聚硅氧烷为先驱体,研究先驱体转化过程中在不同的裂解温度下对制备SiCf/Si-O-C复合材料性能影响.结果表明,当裂解温度在700℃、800℃时,陶瓷基复合材料的弯曲强度分别为255.2 MPa、309.0 MPa;当裂解温度在1000℃时,陶瓷基复合材料的弯曲强度为45.3 MPa.对SiCf/Si-O-C复合材料的微观结构及载荷-位移曲线进行分析,发现界面结构是影响SiCf/Si-O-C复合材料性能的主要因素.     

Bionic stab-resistant body armor based on triangular pyramid structure

A stab-resistant substrate was designed and realized with a triangular pyramidal structure, inspired by the biological armor model in nature. The stab-resistance behavior and dynamic response mechanisms were studied through numerical simulation and experimental testing of a knife impacting a substrate, and an optimal structural design was obtained accordingly, with a tilted angle of 22.5° and optimal thickness of 1.2 mm. It was shown that the triangular pyramidal structure generated twice the internal energy of the knife than the flat substrate due to the dispersing effect of the structure. The force parallel to the inclination caused a significant scratch on the substrate surface, while the force perpendicular caused obvious substrate deformation. A new riveting method was used to form the total layer, which passed the GA 68—2008 standard. The stab-resistant clothing coupled with the reduced wearing burden could provide effective protection and avoid fatal injuries on security personnel working in dangerous environments. The method provided may enlighten the future design and manufacturing of stab-resistant clothing.     

碳化硼表面金属化初步研究

为了降低碳化硼(B,C)与金属钎焊连接的温度,采用真空熔结Al基钎料的方法,在1000℃时对其进行了表面金属化处理,SEM和EDAX观察分析B4C与钎料结合断面的形貌和元素面分布,发现B4C与钎料界面发生了互扩散,界面结合致密,形成冶金结合.     

军事素质基础综合训练的改革与实践研究

以提高军事素质为核心,结合“4+1”培养模式对复合型军事人才的要求,对军事素质基础综合训练教学进行了改革。重点阐述了深化军事素质基础综合训练的教学改革特点和实践效果,为总装备部乃至全军院校进一步深化军事基础教学改革提供一些思路和参考。     

Inventory models with nonlinear shortage costs and stochastic lead times; applications of shape properties of randomly stopped counting processes

In this article, we study generalizations of some of the inventory models with nonlinear costs considered by Rosling in (Oper. Res. 50 (2002) 797–809). In particular, we extend the study of both the periodic review and the compound renewal demand processes from a constant lead time to a random lead time. We find that the quasiconvexity properties of the cost function (and therefore the existence of optimal (s, S) policies), holds true when the lead time has suitable log‐concavity properties. The results are derived by structural properties of renewal delayed processes stopped at an independent random time and by the study of log‐concavity properties of compound distributions. © 2015 Wiley Periodicals, Inc. Naval Research Logistics 62: 345–356, 2015     

基于最优核时频分布的装甲车辆微多普勒特征分析

依据微多普勒效应原理,构建了装甲车辆微动的雷达回波数学模型,推导了装甲车辆点目标的回波信号解析关系,并针对回波信号非平稳非线性的特点,利用最优核时频分布结合求时频脊的方法,仿真提取了装甲车辆微动线目标的回波微多普勒特征。仿真结果表明:线目标模型更能凸现、解析装甲车辆微动特征;采用的最优核时频分布结合求时频脊方法,具有比经典二次型分布更好的时频像,能较好地提取出微多普勒特征。最后,利用该方法分析了低信噪比下目标加速度、身管长度等参数对微多普勒特征的影响。     

不同侵彻速度下陶瓷复合装甲等效均质钢靶板的建立

利用有限元软件ANSYS/LS-DYNA对钨合金长杆弹侵彻陶瓷复合装甲与均质钢进行了数值仿真。重点分析了长杆弹垂直侵彻复合装甲全过程,研究了钨合金长杆弹体入射速度与弹体剩余动能、损失动能之间的关系。同时,拟合了长杆弹在不同入射速度侵彻均质钢靶下弹体剩余动能与靶板厚度之间的关系。并根据终点效应关系式,建立了弹体在不同入射速度下陶瓷复合装甲的均质钢等效靶板。分析结果表明,陶瓷复合装甲等效均质钢靶板厚度随弹体入射速度呈先增加后稳定趋势。研究结果对毁伤效能试验与战斗部设计等具有一定的参考价值和借鉴意义。