Determination of burn‐in parameters and residual life for highly reliable products

Today, many products are designed and manufactured to function for a long period of time before they fail. Determining product reliability is a great challenge to manufacturers of highly reliable products with only a relatively short period of time available for internal life testing. In particular, it may be difficult to determine optimal burn‐in parameters and characterize the residual life distribution. A promising alternative is to use data on a quality characteristic (QC) whose degradation over time can be related to product failure. Typically, product failure corresponds to the first passage time of the degradation path beyond a critical value. If degradation paths can be modeled properly, one can predict failure time and determine the life distribution without actually observing failures. In this paper, we first use a Wiener process to describe the continuous degradation path of the quality characteristic of the product. A Wiener process allows nonconstant variance and nonzero correlation among data collected at different time points. We propose a decision rule for classifying a unit as normal or weak, and give an economic model for determining the optimal termination time and other parameters of a burn‐in test. Next, we propose a method for assessing the product's lifetime distribution of the passed units. The proposed methodologies are all based only on the product's initial observed degradation data. Finally, an example of an electronic product, namely contact image scanner (CIS), is used to illustrate the proposed procedure. © 2002 Wiley Periodicals, Inc. Naval Research Logistics, 2003     

多传感器组合导航系统评述

介绍了组合导航系统的重要性、发展现状和发展趋势。根据导航与目标跟踪的区别与联系,从多传感器组合导航系统研究的角度出发,在概念理解、模型建立和系统结构等方面做了详细的评述,提出了多传感器导航信息融合系统的功能模型,分析了位置融合级的结构模型。     

基于改进协同遗传算法的有效载荷系统功能序列规划方法

针对传统回溯算法在求解基于知识模型的有效载荷系统功能序列规划问题中搜索效率低的问题,提出一种基于"择劣变异"(Worst Individual Mutation,WIM)策略的协同遗传算法(Co-evolutionary Genetic Algorithm,CGA)的改进算法WIM-CGA。该算法在遗传过程中采用双路线进化方案,即"择优实施标准遗传过程,择劣实施变异操作",达到提高求解精确度及搜索效率的目的。仿真结果表明,同等测试条件下,当功能规模为50,约束密度为1.0时,WIM-CGA算法在限定时间内最优解的平均精确度比优化的回溯算法提高了54.15%,比CGA算法提高了6.18%,且当所得解的精确度大于90%时,WIM-CGA算法比CGA算法的迭代次数减少了65.79%,耗时降低了48.97%,显著提高了功能序列规划的效率。     

层次式网络管理系统故障管理子系统研究与实现

计算机网络日益复杂和异构化，迫切需要提高可靠、跨平台的网络管理系统保证网络稳定、高效运行。分析了传统网络管理系统的不足，提出了一层次分布式网络管理系统故障管理算法，并讨论了算法的性能。最后采用ＣＯＲＢＡ，Ｗｅｂ和Ｊａｖａ技术实现了该算法。     

顶置武器站性能评估方法

在评估指标体系和虚拟样机仿真测试评估数据的基础上,对顶置武器站性能评估进行研究。对评估方法进行研究,提出了适合顶置武器站性能评估特点的灰色模糊综合评估法,选用灰色关联度分析计算指标权重,建立开放性的隶属矩阵,最终建立顶置武器站性能评估模型。通过实例评估表明该评估模型准确可靠。     

论消防工作与政府投入的数学原理

近年来,政府对消防投入水平较低。通过建立数学模型,从消防部门与政府的相互关系进行理论论证,抛砖引玉,提出消防工作的建议。     

捷联惯导系统快速自对准误差模型的建立

通过对惯性制导系统两个基本方程的研究,求出了各状态矢量在各坐标系下的微分方程,然后以ψ角法所确立的平台为基准,分别推导得出惯性制导系统各主要状态的微分方程,从而建立了捷联惯性制导系统的误差模型.最后根据静基座捷联惯导系统初始对准的特点对其进行简化,得到了静基座捷联惯导系统快速自对准的误差模型.     

A general model of heterogeneous system lifetimes and conditions for system burn‐in

Burn‐in is a technique to enhance reliability by eliminating weak items from a population of items having heterogeneous lifetimes. System burn‐in can improve system reliability, but the conditions for system burn‐in to be performed after component burn‐in remain a little understood mathematical challenge. To derive such conditions, we first introduce a general model of heterogeneous system lifetimes, in which the component burn‐in information and assembly problems are related to the prediction of system burn‐in. Many existing system burn‐in models become special cases and two important results are identified. First, heterogeneous system lifetimes can be understood naturally as a consequence of heterogeneous component lifetimes and heterogeneous assembly quality. Second, system burn‐in is effective if assembly quality variation in the components and connections which are arranged in series is greater than a threshold, where the threshold depends on the system structure and component failure rates. © 2003 Wiley Periodicals, Inc. Naval Research Logistics 50: 364–380, 2003.     

基于ADAMS和Matlab的大口径舰炮发射系统动力学仿真

利用ADAMS和Matlab/Simulink两大软件的信息交互功能,将ADAMS中的全炮动力学仿真模型生成ADAMS_SUB模块,并将其嵌入联合后坐系统仿真模型中;通过ADAMS和 Matlab/Simulink同步运行对全炮进行发射动力学联合仿真,模拟大口径舰炮发射的全过程,分析全炮的动态响应.对全炮发射动力学联合仿真结果进行后处理分析,观察炮口扰动曲线,进行稳定性分析和炮口扰动分析.根据分析结果,对所建模型及仿真模块进行评价,结果表明,仿真结果与靶场试验数据基本吻合,为物理样机的研制提供了重要的理论参考依据.     

基于伪临界值的Cache一致性协议验证方法

针对Cache一致性协议状态空间爆炸问题,提出共享集合伪临界值(Pseudo-cutoff)的概念,并以采用释放一致性模型的CC-NUMA系统为例,分析了共享数据的分布情况,推导出在一定条件下共享集合伪临界值为4的结论,有效优化了目录Cache协议状态空间,并提出了解决小概率的宽共享事件的方法.实验数据表明,基于伪临界值的协议模型优化,能够有效缩小Cache协议状态空间,加快验证速度,扩大验证规模.