一类平面三次系统的鞍点量和可积条件

本文用一种新的方法,对不含二次项的平面三次系统,给出了其鞍点量公式,导出了该系统可积的充要条件,并指出了用不同计算方法所求得的鞍点量之间的关系。     

目标定位精度较低情况下的导弹射击方法

以舰对舰导弹为例,从战术运用角度,分析和论述了几种在目标定位精度较低情况下的导弹射击方法。     

Allocation with demand competition: Uniform,proportional, and lexicographic mechanisms

We examine capacity allocation mechanisms in a supply chain comprising a monopolistic supplier and two competing retailers with asymmetric market powers. The supplier allocates limited capacity to retailers according to uniform, proportional, or lexicographic mechanism. We study the impact of these allocation mechanisms on supplier pricing decisions and retailer ordering behavior. With individual order size no greater than supplier capacity, we show that all three mechanisms guarantee equilibrium ordering. We provide precise structures of retailer ordering decisions in Nash and dominant equilibria. Further, we compare the mechanisms from the perspective of the supplier, the retailers, and the supply chain. We show that regardless of whether retailer market powers are symmetric, lexicographic allocation with any priority sequence of retailers is better than the other two mechanisms for the supplier. Further, under lexicographic allocation, the supplier gains more profit by granting higher priority to the retailer with greater market power. We also extend our study to the case with multiple retailers. © 2017 Wiley Periodicals, Inc. Naval Research Logistics 64: 85–107, 2017     

时变最优条件数的目标要素解算方法

纯方位目标跟踪是一个典型的非线性问题,伪线性跟踪估计器是理论和工程上解决该问题的一类重要方法。针对纯方位观测模型伪线性化后,系统存在弱可观测性问题,提出了一种时变最优条件数的目标要素解算新方法,理论上给出了一个改善系统可观测性的最优乘数因子。在系统条件数和参数估计的收敛概率两个方面,数值仿真和实验数据验证都表明新方法要优于经典纯方位伪线性化方法。     

坦克火力系统通用技术状态指标体系构建

我军对某型坦克火力系统实施状态维修,准确的技术状态评估是状态维修的前提,技术状态指标体系是进行火力系统状态评估的依据。构建指标体系的过程中,首先应用层次分析法构建技术状态参数体系的层次结构,然后采用云模型的方法获取参数体系中各定性、定量参数的相对重要度等级,依此使参数体系最优化。实例证明,上述方法有效解决了构建坦克火力系统技术状态指标体系的构建中分类不明确、筛选困难等问题。     

Resource allocation in an asymmetric technology race with temporary advantages

We consider two opponents that compete in developing asymmetric technologies where each party's technology is aimed at damaging (or neutralizing) the other's technology. The situation we consider is different than the classical problem of commercial R&D races in two ways: First, while in commercial R&D races the competitors compete over the control of market share, in our case the competition is about the effectiveness of technologies with respect to certain capabilities. Second, in contrast with the “winner‐takes‐all” assumption that characterizes much of the literature on this field in the commercial world, we assume that the party that wins the race gains a temporary advantage that expires when the other party develops a superior technology. We formulate a variety of models that apply to a one‐sided situation, where one of the two parties has to determine how much to invest in developing a technology to counter another technology employed by the other party. The decision problems are expressed as (convex) nonlinear optimization problems. We present an application that provides some operational insights regarding optimal resource allocation. We also consider a two‐sided situation and develop a Nash equilibrium solution that sets investment values, so that both parties have no incentive to change their investments. © 2012 Wiley Periodicals, Inc. Naval Research Logistics 59: 128–145, 2012     

摩擦条件对纳米铜润滑添加剂减摩性能影响的研究

研究了摩擦速度、载荷和摩擦表面处理方式等摩擦条件,对纳米铜润滑添加剂减摩性能的影响,发现摩擦速度较高时,载荷增加使摩擦因数明显降低;在低载荷时摩擦速度的减小,使摩擦因数降低了17%,载荷增大后摩擦速度的变化,对摩擦因数的影响减小.摩擦表面抛光处理,使摩擦因数降低为磨削处理时的74%.     

Numerical simulation of warhead transportation

The new numerical approach for analysis of the warhead transportations is suggested.This approach allows to control the warhead operability before its experimental analysis.The approach is implemented by the adequate models for the software ANSYS.Analysis of the loads at land operations and trans-portations of the warhead by natural roads,water and aviation allows to obtain the maximal values of loads,which are used in numerical simulations of the warhead.These loads give an opportunity to analyze the operability and the fatigue strength of the cartridge warhead.The numerical simulations of the attachments of the warhead combat elements are performed on the basis of the suggested method.The data of the numerical simulations verifies the operability of the fastener system of the warhead combat elements.     

An efficient SPH methodology for modelling mechanical characteristics of particulate composites

Particulate composites are one of the widely used materials in producing numerous state-of-the-art components in biomedical, automobile, aerospace including defence technology. Variety of modelling techniques have been adopted in the past to model mechanical behaviour of particulate composites. Due to their favourable properties, particle-based methods provide a convenient platform to model failure or fracture of these composites. Smooth particle hydrodynamics (SPH) is one of such methods which demonstrate excellent potential for modelling failure or fracture of particulate composites in a Lagrangian setting. One of the major challenges in using SPH method for modelling composite materials depends on accurate and efficient way to treat interface and boundary conditions. In this paper, a master-slave method based multi-freedom constraints is proposed to impose essential boundary conditions and interfacial displacement constraints in modelling mechanical behaviour of composite materials using SPH method. The proposed methodology enforces the above constraints more accurately and requires only smaller condition number for system stiffness matrix than the procedures based on typical penalty function approach. A minimum cut-off value-based error criteria is employed to improve the compu-tational efficiency of the proposed methodology. In addition, the proposed method is further enhanced by adopting a modified numerical interpolation scheme along the boundary to increase the accuracy and computational efficiency. The numerical examples demonstrate that the proposed master-slave approach yields better accuracy in enforcing displacement constraints and requires approximately the same computational time as that of penalty method.     

Log‐concave and concave distributions in reliability

Nonparametric classes of life distributions are usually based on the pattern of aging in some sense. The common parametric families of life distributions also feature monotone aging. In this paper we consider the class of log‐concave distributions and the subclass of concave distributions. The work is motivated by the fact that most of the common parametric models of life distributions (including Weibull, Gamma, log‐normal, Pareto, and Gompertz distributions) are log‐concave, while the remaining life of maintained and old units tend to have a concave distribution. The classes of concave and log‐concave distributions do not feature monotone aging. Nevertheless, these two classes are shown to have several interesting and useful properties. We examine the closure of these classes under a number of reliability operations, and provide sharp reliability bounds for nonmaintained and maintained units having life distribution belonging to these classes. © 1999 John Wiley & Sons, Inc. Naval Research Logistics 46: 419–433, 1999