光纤陀螺标度因数的精确标定与补偿

根据光纤陀螺信号静态漂移的数学模型,提出了一种迭代标定方法,可以精确地补偿光纤陀螺的标度因数和安装偏角误差.考虑光纤陀螺标度因数与温度的非线性关系,采用了BP神经网络进行温度补偿,取得了理想的效果.     

石英纤维增强苯并噁嗪树脂复合材料研究

对苯并(啞心)嗪树脂应用于RTM工艺制备石英纤维增强复合材料进行了研究.系统考察了该树脂的工艺性能及力学性能,制备并测试了石英/苯并(啞心)嗪复合材料的力学性能及耐烧蚀性能,并将相关性能与钡酚醛与石英/钡酚醛进行了比较.结果表明,在85℃～145℃温度区间内苯并(啞心)嗪树脂粘度保持在800mPa·s以下,树脂具有较宽的低粘度温度平台和较长的低粘度保持时间.力学性能及耐烧蚀性能研究表明,石英/苯并(啞心)嗪复合材料的层间剪切强达到了61.5MPa,拉伸强度和弯曲强度显著优于石英,钡酚醛复合材料,质量烧蚀率和线烧蚀率分别为0.0510g·s-1和0.032mm·s-1.石英/苯并(啞心)嗪复合材料是一种可采用RTM工艺制备的耐烧蚀材料.     

轻集料钢筋混凝土梁受弯性能试验研究

轻集料混凝土应用于港口工程是一个待研究的课题.通过对4根轻集料钢筋混凝土梁和2根普通混凝土梁进行的抗弯对比试验,研究了轻集料钢筋混凝土粱的抗弯力学性能.结果表明,轻集料钢筋混凝土梁在承受正常荷载时,其力学性能与普通混凝土梁相比无明显差异;在破坏时脆性较同等级普通混凝土粱略大,延性略差.但考虑到轻集料混凝土的优点,在实际工程中可代替普通混凝土受弯构件工作.     

PDMS/PVC制备低电阻率碳化硅纤维先驱体聚碳硅烷

由聚二甲基硅烷(PDMS)与3%～7%wt聚氯乙烯(PVC)共热解反应生成的聚碳硅烷(PC P),是制备力学性能优良的低电阻率碳化硅纤维的先驱体。研究了PC P先驱体的合成条件,利用GPC、IR、XPS、元素分析等手段对PC P先驱体的组成与结构进行了分析,并初步探讨了PDMS与PVC反应机理。     

东莞市商业中心超长钢筋混凝土结构无缝设计探讨

近年我国修建了越来越多的混凝土结构超大建筑物，我国混凝土规范（GB50010--2002）第9．1．1条规定伸缩缝最大间距55m。但由于建筑的需要，在设计中经常出现不设或少设伸缩缝的情况。若不采取处理措施，将出现大面积开裂。钢筋混凝土结构开裂与混凝土自身干缩应力及水化热所产生的温度应力有关。介绍了通过采用SY—G型高性能膨胀抗裂剂配制成补偿收缩混凝土来解决混凝土冷缩和干缩问题的方法。在建筑施工中使用该方法能有效控制地下室及裙房的楼面屋面钢筋混凝土结构裂缝，并加快施工进度．缩短工期。     

低阶像差校正的压电驱动变形镜测试与仿真优化

光纤激光器输出光束带有波前畸变,制约了光学系统的性能和工作效率。搭建实验系统分析了超连续谱光纤激光器系统输出光束的像差特性,不同波长的滤波片测试像差均以离焦为主。根据这一特点制备了3单元单层横向压电驱动变形镜样镜,并进行特性测试。变形镜影响函数有限元仿真和实测吻合度可达77%以上,一阶谐振频率12. 1 k Hz。以实际像差为对象进行闭环仿真,校正精度达到0. 77。另外,从校正精度及行程两个方面对变形镜进行了有限元优化仿真。结果 9单元变形镜(有效口径7. 5 mm)校正精度达到0. 9左右。镜片与压电片厚度比存在最优值约0. 3,行程可提升60%以上。     

多波长主动式相干合成中光程差对合成效果的影响

为了对多波长激光主动式相干合成做出初步的理论描述,揭示影响合成效果的关键因素,根据相干合成的基本原理,建立了计算模型.并以9波长7路相干合成系统为实例,仿真计算了光程差取不同值的情况下,各频率成分的合成效果和总体合成效果.当各路间存在较大的光程差时,只有中心频率成分实现了相干相长,其他频率成分处于"混乱"状态,总体合成...     

光子晶体光纤的空气孔膨胀和拉锥技术研究

光子晶体光纤的空气孔膨胀和拉锥技术是一种有效的改变光纤结构参数的技术手段.空气孔膨胀可以改变空气孔的填充比例,即改变空气孔直径和孔间距的大小,光纤拉锥可在保持空气孔直径和孔间距比例不变的情况下改变纤芯的大小.光子晶体光纤结构参数的可控性改变可实现一些特殊光子晶体光纤器件的制作,对进一步实现和挖掘光子晶体光纤的潜在应用价...     

基于可调光纤F-P滤波器解调的分布式光纤光栅传感系统

提出并实现了一种可满足工程实用要求的波分复用光纤光栅传感网络解决方案,系统通过可调谐光纤F-P滤波器的连续扫描实现波长信号的解调.该传感系统扫描带宽50 nm,单点工作带宽5 nm,对一般应用系统每根单纤可设20-30个点,系统最高扫描频率200 Hz,分辨率5 pm(约5με或0.5℃).     

Resistance of grid steel-tube-confined concrete targets against projectile impact: Experimental investigation and analytical engineering model

Steel-tube-confined concrete (STCC) targets are provided with excellent anti-penetration performance over semi-infinite concrete (SIC) targets since the steel tube imposes passive restraint on the in-filled concrete during the penetration process. Grid STCC system with square steel tubes is a potential solution to protective structures. In this paper, experiments of 9-cell grid STCC targets penetrated by 12.7 mm Armor Piercing Projectile (APP) were performed. The influence of side length and thickness of steel tube, steel ratio and impact velocity on anti-penetration performance were taken into account. Additionally, single-cell square STCC targets were also designed and tested for comparison with the 9-cell grid STCC targets. Damage modes and parameters of the tested targets were measured and discussed. Moreover, the stiffness of radial confinement of grid STCC targets is achieved according to the elastic solution of infinite cylindrical shell in Winkler medium. Furthermore, the penetration resistance and depth of penetration (DOP) for grid STCC targets are obtained on the basis of the dynamic finite spherical cavity-expansion (FSCE) models including radial confinement effect. It is shown that the 9-cell grid STCC targets with optimal dimension match of thickness and side length of steel tube can reduce the DOP by about 17 % and 23 % in comparison with the SIC targets and single-cell square STCC targets, respectively, due to both the confinement of square steel tube to concrete in the impacted cell and the additional confinement of the surrounding cells to the impacted cell; the penetration resistance and DOP of the grid and cellular STCC targets with similar steel ratio is close, and thus the grid STCC targets with simpler manufacturing process and excellent in-plane expandability are preferred in engineering practice; moreover, the predicted results of DOP model based on the FSCE models agree well with the tested results with the maximum disparity less than 12 % and the proposed model is more applicable to the grid and cellular STCC targets with high radial confinement.