国防领域技术预警流程研究

技术预警是对技术突破和由此引起的军事、政治、经济和社会危机的预测,是从国家安全的根本利益出发,以保持己方军事优势、防止敌人"技术突袭"为宗旨的技术发展预测。研究回顾了国内外技术预警研究历程,从前期准备、预警清单、技术调查、分析评估等四个主要环节,全面分析国防领域技术预警的具体流程,为国防领域技术预警系统的构建与应用提供支撑。     

静电放电抗扰度试验中辐射场若干特性的试验研究

国际标准IEc61000-4—2中对静电放电抗扰度试验方法和试验布局进行了规定，但是对间接静电放电（ESD）产生的辐射场没有进行描述。根据标准IEc61000—4—2，首先对水平耦合板和垂直耦合板放电时垂直耦合板上的场分布进行了分析，然后对几种医疗设备进行静电放电抗扰度试验。试验得出：1）对两种耦合板放电时，水平耦合板上电场强度和磁场强度随测试距离的变化趋势不同；2）试验结果对ESD模拟器的种类有着依赖关系。这些结果为研究电子设备静电放电抗扰度试验新方法、新标准和新的试验平台及诊断评估方法提供了参考依据。     

电磁发射用脉冲电抗器应力分析及结构设计

基于对电磁力以及热应力的解析计算公式的推导，运用ANSYS有限元仿真软件对固定电抗器顶底端面情况下的铜箔进行电磁-温度-结构耦合分析，分别得出热应力及所受总应力与应变的分布情况。进一步对电抗器的结构进行优化，综合考虑其结构强度要求与连发温度要求，确定电抗器的最优设计结构，最终通过试验验证出仿真与设计方案真实可信。     

Determination of burn‐in parameters and residual life for highly reliable products

Today, many products are designed and manufactured to function for a long period of time before they fail. Determining product reliability is a great challenge to manufacturers of highly reliable products with only a relatively short period of time available for internal life testing. In particular, it may be difficult to determine optimal burn‐in parameters and characterize the residual life distribution. A promising alternative is to use data on a quality characteristic (QC) whose degradation over time can be related to product failure. Typically, product failure corresponds to the first passage time of the degradation path beyond a critical value. If degradation paths can be modeled properly, one can predict failure time and determine the life distribution without actually observing failures. In this paper, we first use a Wiener process to describe the continuous degradation path of the quality characteristic of the product. A Wiener process allows nonconstant variance and nonzero correlation among data collected at different time points. We propose a decision rule for classifying a unit as normal or weak, and give an economic model for determining the optimal termination time and other parameters of a burn‐in test. Next, we propose a method for assessing the product's lifetime distribution of the passed units. The proposed methodologies are all based only on the product's initial observed degradation data. Finally, an example of an electronic product, namely contact image scanner (CIS), is used to illustrate the proposed procedure. © 2002 Wiley Periodicals, Inc. Naval Research Logistics, 2003     

改进的Euler方法应用于非线性方程求根

本文通过引入动力系统，将改进的Euler方法应用于非线性方程求根问题，给出非线性方程求根的预估-再校正迭代格式，证明了该格式至少二阶收敛并可以调节参数达到超收敛。最后给出数值实验，数值结果验证了算法的有效性。     

电子时间引信检测仿真试验研究

为提高电子时间引信的检测能力，介绍了电子时间引信检测仿真试验，分析了仿真试验的原理，给出了检测仿真试验的试验方法。经实际检测表明，该检测仿真试验能够安全可靠地完成电子时间引信的日常检测任务。     

Estimating failure time distribution and its parameters based on intermediate data from a Wiener degradation model

Instead of measuring a Wiener degradation or performance process at predetermined time points to track degradation or performance of a product for estimating its lifetime, we propose to obtain the first‐passage times of the process over certain nonfailure thresholds. Based on only these intermediate data, we obtain the uniformly minimum variance unbiased estimator and uniformly most accurate confidence interval for the mean lifetime. For estimating the lifetime distribution function, we propose a modified maximum likelihood estimator and a new estimator and prove that, by increasing the sample size of the intermediate data, these estimators and the above‐mentioned estimator of the mean lifetime can achieve the same levels of accuracy as the estimators assuming one has failure times. Thus, our method of using only intermediate data is useful for highly reliable products when their failure times are difficult to obtain. Furthermore, we show that the proposed new estimator of the lifetime distribution function is more accurate than the standard and modified maximum likelihood estimators. We also obtain approximate confidence intervals for the lifetime distribution function and its percentiles. Finally, we use light‐emitting diodes as an example to illustrate our method and demonstrate how to validate the Wiener assumption during the testing. © 2008 Wiley Periodicals, Inc. Naval Research Logistics, 2008     

侧壁式气垫船水压场试验研究

在拖曳水池中对侧壁式气垫船的水压场进行了系统测量,得到不同水深、不同航速和不同横向位置水底扰动压力系数的纵向通过特性曲线,分析总结了侧壁式气垫船水压场规律.     

基于自适应累量算法的舰船轴频电场信号检测方法

提出一种新的舰船轴频电场信号检测方法.该方法利用高阶累量对高斯噪声的抑制作用,首先使用基于自适应累量算法的FIR滤波器对接收信号进行滤波消噪处理,以提高信噪比;然后再对滤波输出信号进行滑动功率谱检测.实测数据处理结果表明了该方法的稳健性和有效性.     

风场的科学计算可视化在导弹射击中的应用

在导弹射击时,消除风会对导弹飞行造成不利的影响,因此基于可视化分析的研究模型、流程等,利用科学计算方法直观分析优点对风的大小和方向进行分析,并采用开放图形接口对实验风场数据进行了三维图形绘制以提高导弹打击目标的精度,对实际中导弹的风场阻力研究有一定的指导意义.