增程修正弹单炮多发同时弹着火控技术研究

针对大口径火炮使用增程修正弹打远修近问题,建立了增程修正弹单炮多发同时弹着的控制算法,仿真验证了算法可在不同射程上实现单炮多发同时弹着,对发挥舰炮作战效能具有一定的意义。     

夺占小型岛屿作战综合登陆舰编队展开点选择优化模型

针对综合登陆舰编队夺占小型岛屿作战中的威胁特点,确定了岸基航空兵对综合登陆舰的有效掩护区,建立了综合登陆舰展开点选择的优化模型,并给出了简单方便的图上作业法,为合理确定综合登陆舰的展开点提供了方法和依据。     

Fatigue crack propagation in a helicopter component subjected to impact damage

Damage tolerant methodology is increasingly used in aeronautical components,especially due the fact that the Aviation Regulation requires such an assessment in case an accidental damage occurs.At pre-sent,there is a strong and actual interest in applying such procedures to helicopter components that are subjected to high frequency cyclic loads.In this paper,an investigation on a damaged transmission shaft for a tail rotor transmission of an actual helicopter has been carried out focusing on the fatigue crack propagation.A complete sequence of experimental tests was performed in order to create an actual ballistic damage and to subsequently check the damage tolerant behaviour.The shaft was damaged by oblique ballistic impact and was subsequently subjected to torsional fatigue loading.During the fatigue cycles several cracks propagated from the ballistic damages.Both of these steps(impact and fatigue loading)were also simulated by a complex modelling approach based on Finite Element Models and fracture mechanics theory.The comparison between the experimental and numerical results shows a good agreement but it underlines the need for a very refined modelling technique capable to replicate all the features associated with the damage in order to reliably simulate the subsequent propagation phase.     

Hypersonic impact flash characteristics of a long-rod projectile collision with a thin plate target

Impact flash occurs when objects collide at supersonic speeds and can be used for real-time damage assessment when weapons rely on kinetic energy to destroy targets.However,the mechanism of impact flash remains unclear.A series of impact flash experiments of flat-head long-rod projectiles impacting thin target plates were performed with a two-stage light gas gun.The impact flash spectra for 6061 aluminum at 1.3-3.2 km/s collision speeds were recorded with a high-speed camera,a photoelectric sensor,and a time-resolved spectrometer.The intensity of the impact flash exhibited a pulse charac-teristic with time.The intensity(I)increased with impact velocity(V0)according to I∝Vn0,where n = 4.41 for V0 ＞ 2 km/s.However,for V0 ＜ 2 km/s,n = 2.21,and the intense flash duration is an order of magnitude less than that of higher V0.When V0 ＞ 2 km/s,a continuous spectrum(thermal radiation background)was observed and increased in intensity with V0.However,for V0 ＜ 2 km/s,only atomic line spectra were detected.There was no aluminum spectral lines for V0 ＜ 2 km/s,which indicated that it had not been vaporized.The initial intense flash was emission from excited and ionized ambient gases near the impact surface,and had little relationship with shock temperature rise,indicating a new mechanism of impact flash.     

Shock-induced reaction behaviors of functionally graded reactive material

In this paper, the ballistic impact experiments, including impact test chamber and impact double-spaced plates, were conducted to study the reaction behaviors of a novel functionally graded reactive material (FGRM), which was composed of polytetrafluoroethylene/aluminum (PTFE/Al) and PTFE/Al/bismuth trioxide (Bi₂O₃). The experiments showed that the impact direction of the FGRM had a significant effect on the reaction. With the same impact velocity, when the first impact material was PTFE/Al/Bi₂O₃, compared with first impact material PTFE/Al, the FGRM induced higher overpressure in the test chamber and larger damaged area of double-spaced plates. The theoretical model, which considered the shock wave generation and propagation, the effect of the shock wave on reaction efficiency, and penetration behaviors, was developed to analyze the reaction behaviors of the FGRM. The model predicted first impact material of the FGRM with a higher shock impedance was conducive to the reaction of reactive materials. The conclusion of this study provides significant information about the design and application of reactive materials.     

Investigation on the process parameters of TIG-welded aluminum alloy through mechanical and microstructural characterization

Multi-pass TIG welding was conducted on plates (15×300×180 mm3) of aluminum alloy Al-5083 that usually serves as the component material in structural applications such as cryogenics and chemical processing industries. Porosity formation and solidification cracking are the most common defects when TIG welding Al-5083 alloy, which is sensitive to the welding heat input. In the experiment, the heat input was varied from 0.89 kJ/mm to 5 kJ/mm designed by the combination of welding torch travel speed and welding current. Tensile, micro-Vicker hardness and Charpy impact tests were executed to witness the impetus response of heat input on the mechanical properties of the joints. Radiographic inspection was performed to assess the joint's quality and welding defects. The results show that all the specimens displayed inferior mechanical properties as compared to the base alloy. It was established that porosity was progressively abridged by the increase of heat input. The results also clinched that the use of me-dium heat input (1-2 kJ/mm) offered the best mechanical properties by eradicating welding defects, in which only about 18.26% of strength was lost. The yield strength of all the welded specimens remained unaffected indicated no influence of heat input. Partially melted zone (PMZ) width also affected by heat input, which became widened with the increase of heat input. The grain size of PMZ was found to be coarser than the respective grain size in the fusion zone. Charpy impact testing revealed that the absorbed energy by low heat input specimen (welded at high speed) was greater than that of high heat input (welded at low speed) because of low porosity and the formation of equiaxed grains which induce better impact toughness. Cryogenic (-196 C) impact testing was also performed and the results corroborate that impact properties under the cryogenic environment revealed no appreciable change after welding at designated heat input. Finally, Macro and micro fractured surfaces of tensile and impact specimens were analyzed using Stereo and Scanning Electron Microscopy (SEM), which have supported the experimental findings.     

Survivability assessment of spacecraft impacted by orbit debris

To help optimize the spacecraft design and reduce the risk of spacecraft mission failure, a new approach to assess the survivability of spacecraft in orbit is presented here, including the following three steps:1) Sensitivity Analysis of spacecraft. A new sensitivity analysis method, a ray method based on virtual outer wall, is presented here. Using rays to simulate the debris cloud can effectively address the component shadowing issues. 2) Component Vulnerability analysis of spacecraft. A function"Component functional reduction degree — Component physical damage degree"is provided here to clearly describe the component functional reduction. 3) System-level Survivability Assessment of spacecraft. A new method based on expert knowledge reasoning, instead of traditional artificial failure tree method, is presented here to greatly improve the efficiency and accuracy of calculation.     

Research and development on hypervelocity impact protection using Whipple shield: An overview

Whipple shield, a dual-wall system, as well as its improved structures, is widely applied to defend the hypervelocity impact of space debris (projectile). This paper reviews the studies about the mechanism and process of protection against hypervelocity impacts using Whipple shield. Ground-based experiment and numerical simulation for hypervelocity impact and protection are introduced briefly. Three steps of the Whipple shield protection are discussed in order, including the interaction between the projectile and bumper, the movement and diffusion of the debris cloud, and the interaction between the debris cloud and rear plate. Potential improvements of the protection performance focusing on these three steps are presented. Representative works in the last decade are mentioned specifically. Some prospects and suggestions for future studies are put forward.     

非线性转子系统碰摩现象的动力学仿真

针对一类非线性转子系统 ,建立了碰摩模型。在此基础上 ,通过模型的动力学仿真分析 ,研究了非线性碰摩转子系统的同频、倍频、分频、拟周期和混沌振动及其出现特点。其中揭示的振动特征对转子系统的状态识别与诊断具有一定的意义     

填充式波纹夹层结构超高速撞击特性仿真

基于航天器空间碎片被动防护需求,对一种新型填充式波纹夹层结构进行超高速撞击仿真研究,分析超高速撞击过程以及结构的穿孔破坏情况和所形成的碎片云的特性,并与相同面密度Whipple结构进行对比。其撞击现象与Whipple结构相似,但其碎片云的头部速度小于Whipple结构,而径向膨胀最大速度和膨胀半角均大于Whipple结构。随撞击初速从3 km/s~10 km/s不断增大,波纹夹层结构的撞击穿孔尺寸变大,形状也更不规则。此外,结构中的填充树脂对碎片撞击能量的吸收贡献最大,后面板所吸收的能量所占比重较大,而前面板和波纹板对碎片撞击能量的吸收贡献较小。研究结果对空间碎片防护结构的设计具有一定的参考意义。