Damage mechanics and energy absorption capabilities of naturalfiber reinforced elastomeric based bio composite for sacrificial structural applications

The present study deals with the experimental, finite element (FE) and analytical assessment of low ballistic impact response of proposedflexible'green' composite make use of naturally available jute and rubber as the constituents of the composite with stacking sequences namely jute/rubber/jute (JRJ), jute/rubber/rubber/jute (JRRJ) and jute/rubber/jute/rubber/jute (JRJRJ). Ballistic impact tests were carried out by firing a conical projectile using a gas gun apparatus at lower range of ballistic impact regime. The ballistic impact response of the proposed flexible composites are assesses based on energy absorption and damage mechanism. Results revealed that inclusion of natural rubber aids in better energy ab-sorption and mitigating the failure of the proposed composite. Among the three different stacking se-quences of flexible composites considered, JRJRJ provides better ballistic performance compared to its counterparts. The damage study reveals that the main mechanism of failure involved in flexible com-posites is matrix tearing as opposed to matrix cracking in stiff composites indicating that the proposedflexible composites are free from catastrophic failure. Results obtained from experimental, FE and analytical approach pertaining to energy absorption and damage mechanism agree well with each other. The proposed flexible composites due to their exhibited energy absorption capabilities and damage mechanism are best suited as claddings for structural application subjected to impact with an aim of protecting the main structural component from being failed catastrophically.     

921A 钢结构低周疲劳裂纹扩展特性试验研究

采用预制缺口的平板和加筋板结构试样,对 921A 钢进行了拉伸疲劳载荷作用下的低周疲劳试验得到了拉伸疲劳载荷作用下舰体结构破口裂纹扩展规律,提出了破损舰体结构在疲劳载荷作用下裂纹开裂和后续扩展的判据.该试验结果可直接用于分析和预报破损舰船结构在波浪中航行时的裂纹扩展情况,并为破损舰船的剩余疲劳寿命预报奠定了基础.     

Damage visualization and deformation measurement in glass laminates during projectile penetration

Transparent armor consists of glass-polymer laminates in most cases. The formation and propagation of damage in the different glass layers has a strong influence on the ballistic resistance of such laminates. In order to clarify the course of events during projectile penetration, an experimental technique was developed, which allows visualizing the onset and propagation of damage in each single layer of the laminate. A telecentric objective lens was used together with a microsecond video camera that allows recording 100 frames at a maximum rate of 1 MHz in a backlit photography set-up. With this technique, the damage evolution could be visualized in glass laminates consisting of four glass layers with lateral dimensions 500 mm × 500 mm. Damage evolution was recorded during penetration of 7.62 mm AP projectiles with tungsten carbide core and a total mass of 11.1 g in the impact velocity range from 800 to 880 m/s. In order to measure the deformation of single glass plates within the laminates, a piece of reflecting tape was attached to the corresponding glass plate, and photonic Doppler velocimetry (PDV) was applied. With the photonic Doppler velocimeter, an infrared laser is used to illuminate an object to be measured and the Doppler-shifted light is superimposed to a reference light beam at the detector. The simultaneous visualization and PDV measurement of the glass deformation allow determining the deformation at the time of the onset of fracture. The analysis of the experimental data was supported by numerical simulations, using the AUTODYN commercial hydro-code.     

航空轮胎用橡胶弹性体Mullins效应动态加载方法

航空轮胎用橡胶弹性体在服役过程中遭受严苛的动态循环工况。为了研究弹性体在此工况下的力学响应特征和损伤机理,提出基于应力波作用的Mullins效应动态加载实验方法。根据应力波传导与作用特征,采用Hopkinson压杆加载思路,设计和配置了各单元尺寸参数,进而搭建可用于橡胶弹性体材料动态循环加载的实验系统,并开展了航空轮胎用丁苯橡胶的动态循环加载试验。基于试验信号分析发现：加载系统实现了弹性体材料Mullins效应动态应变递增的试验加载。最后开展加载测试参数的影响因素分析,结果表明通过优化系统各单元可实现Mullins效应的动态加、卸载参数的控制。     

多体动力学仿真车辆传动齿轮疲劳寿命灵敏度分析

齿轮是机械传动中重要的传力构件,由于测试手段和试验方法的限制,齿轮设计的时候多采用静强度设计理论,无法准确地反应实际情况下的动态特性,导致齿轮的实际寿命和设计寿命有较大的差距。基于多体动力学仿真分析方法建立履带式车辆传动系统虚拟行驶试验平台,获得齿轮在不同工况下的动载荷谱。基于疲劳分析软件MSC.Fatigue获得了齿轮的疲劳寿命,进而改变齿轮的结构参数分析不同结构齿轮的疲劳寿命,得到其疲劳寿命随不同结构参数变化的规律,进行齿轮疲劳寿命的灵敏度分析,为齿轮的结构优化作了一定的探索。     

复合材料修补金属裂损结构吸湿老化的试验与有限元分析

暴露在湿热环境中的复合材料修补金属裂损结构易吸湿老化,导致该结构性能下降,服役寿命缩短。为研究吸湿性对复合材料修补金属裂损结构修补效果和耐久性的影响,利用试验方法分析了吸湿性对复合材料胶补金属裂损结构及胶黏剂力学性能的影响;利用有限元方法评估了吸湿性对复合材料胶补金属裂损结构试验件修补效果和耐久性的影响。研究结果表明:吸湿后含穿透双边裂纹铝合金板玻璃纤维单面胶补试验件的疲劳裂纹扩展寿命和极限载荷的平均值分别下降为吸湿前的71%和90%;吸湿造成拉伸条件下复合材料胶补金属裂损结构胶层失效模式由内聚破坏为主转变为界面破坏为主;在"湿-热"老化30天后,E44/聚酰胺环氧树脂胶黏剂试验件吸水饱和,弹性模量下降为未老化前的40%,塑性应变超过了总应变的25%;有限元分析发现胶层损伤受吸湿影响明显,吸湿性加速了胶层损伤,且裂纹长度越长,加速作用越明显;同时吸湿使得裂纹尖端的J积分值急剧增大,导致修补结构的疲劳裂纹扩展寿命缩短,裂纹长度越长,吸湿性对于复合材料胶接修补效果的危害越严重。     

球头弹低速斜侵彻下薄板穿甲破坏机理研究

为探讨球头弹低速斜侵彻下靶板的破坏机理,通过系列弹道试验,对比分析了不同初始速度下弹体的变形,靶板的破坏模式,以及靶板的破口大小及形状；同时采用ANSYS/LS-DYNA对弹靶作用过程进行了数值模拟。结果表明：低速斜侵彻下靶板响应非完全对称,根据受力特征可将靶板划分为四个不同区域,即接触区,弯曲区,拉伸区和对称区；薄板的穿甲破坏可分为四个不同的阶段,即隆起变形,碟形变形,弯曲变形,弹体贯穿阶段；不同初始速度下靶板出现四种典型的穿甲破坏模式,随着初始速度的增加依次为隆起—碟形变形,隆起—碟形变形—拉弯撕裂破坏,隆起—碟形变形—拉弯剪切破坏,隆起—拉弯剪切破坏。斜侵彻下靶板破口形状为椭圆形,随着初始速度的增加,破口长径不断减小,形状由椭圆形向卵形过渡。     

An investigation on anti-impact and penetration performance of basalt fiber composites with different weave and lay-up modes

The woven basalt fiber composites (WBFC) and the unidirectional [0°/90°/45°/-45°]_s basalt fiber composites (UBFC) were prepared by hot-pressing. Three-point bending test, low velocity impact test, and ballistic test were performed to the prepared composites. After the tests, the specimens were recovered and analyzed for micromorphology. Three-point bending tests show that both the bending strength and stiffness of the WBFC surpass those of the UBFC. Low velocity impact test results show that the low velocity impact resistance to hemispherical impactor of the UBFC is higher than that of the WBFC, but the low velocity impact resistance to sharp impactor of the UBFC is lower than that of the WBFC. For the ballistic test, it can be found that the ballistic property of the UBFC is higher than that of the WBFC. After the tests, microscopic analysis of the specimens was applied, and their failure mechanism was discussed. The main failure modes of the UBFC are delamination and fibers breakage under the above loading conditions while the main failure mode of the WBFC is fibers breakage. Although delamination damage can be found in the WBFC under the above loading conditions, the degree of delamination is far less than that of the UBFC.     

随机载荷下疲劳寿命预估计算方法研究

分析了一种用于随机载荷下零构件疲劳寿命预估的有效计算方法 .引入材料所吸收的弹性应变能和塑性应变能等参量 ,在等能量损伤法则下推算出稳态条件下随机载荷的等价常幅应力 ,适用于结构设计阶段和改进阶段或应力响应时间历程无法实测的情况 .     

自行火炮扭力轴载荷谱的测量及疲劳寿命预测

为预测自行火炮扭力轴寿命，对某型自行火炮在不同工况下进行实车试验，获得了多工况下扭力轴的载荷谱。受力分析表明，表面最大拉应力是扭力轴的破坏应力；提出基于随机响应面对扭力轴寿命进行预测的方法，将低周疲劳寿命表达式中的随机参数表示为标准随机变量，引人随机响应的Hermite多项展开式进行拟合，建立了扭力轴疲劳寿命的显式函数。通过对实测载荷谱进行统计分析，依据寿命表达式可以预测扭力轴疲劳寿命，并给出概率分布。该方法弥补了传统响应面法以一般多项式拟合时不能保证收敛性的缺陷。     

Shock-induced reaction behaviors of functionally graded reactive material

In this paper, the ballistic impact experiments, including impact test chamber and impact double-spaced plates, were conducted to study the reaction behaviors of a novel functionally graded reactive material (FGRM), which was composed of polytetrafluoroethylene/aluminum (PTFE/Al) and PTFE/Al/bismuth trioxide (Bi₂O₃). The experiments showed that the impact direction of the FGRM had a significant effect on the reaction. With the same impact velocity, when the first impact material was PTFE/Al/Bi₂O₃, compared with first impact material PTFE/Al, the FGRM induced higher overpressure in the test chamber and larger damaged area of double-spaced plates. The theoretical model, which considered the shock wave generation and propagation, the effect of the shock wave on reaction efficiency, and penetration behaviors, was developed to analyze the reaction behaviors of the FGRM. The model predicted first impact material of the FGRM with a higher shock impedance was conducive to the reaction of reactive materials. The conclusion of this study provides significant information about the design and application of reactive materials.     

空投鱼雷入水点影响因素研究

航空自导鱼雷具有命中精度高、威力大、攻潜效果好等特点。针对反潜直升机空投鱼雷作战使用的特点,深入分析了空投鱼雷的空中弹道、直升机的运动态势和风速风向等影响空投鱼雷入水点位置的关键因素,并得到了各要素的数学描述,进而通过仿真分析得到了直升机运动态势和风速风向对空投鱼雷入水点的影响。     

某型飞机平尾轴疲劳断裂失效分析

采用台架试验装置对某型飞机平尾轴进行了疲劳试验,通过断口的观察分析、断口部位的金相分析、硬度检测、有限元结构应力分析,确定了平尾轴的失效模式,并对其断裂失效原因进行了分析。结果表明：平尾轴的断裂性质为疲劳断裂,裂纹源均起源于大轴简体内壁加工刀痕形成的沟槽处,变截面圆弧造成的结构应力集中和粗糙加工刀痕形成的附加应力集中是造成大轴疲劳断裂的主要原因。关键词：平尾轴;疲劳断裂;失效分析;应力集中     

纤维缠绕复合材料夹芯圆柱体高应变率压缩吸能机理

为研究纤维缠绕复合材料夹芯圆柱体吸能元件在高应变率冲击压缩载荷作用下的变形损伤模式和能量吸收机理,采用ABAQUS商用有限元软件和分离式Hopkinson压杆装置开展数值模拟分析和试验验证研究。对比分析宏观力学响应规律和微观损伤破坏机理,可知吸能结构元件在高应变率压缩载荷下的力学响应具有典型的弹塑性特征,内部芯材主要产生压缩塑性损伤,而表层复合材料沿环向产生拉伸断裂破坏。研究表明,该吸能元件冲击压缩吸能特性优异,可满足水下结构平台的冲击防护和浮力储备要求。     

Vulnerability assessment to projectiles: Approach definition and application to helicopter platforms

Survivability is defined as the capability of a platform to avoid or withstand a man-made hostile environment. Military aircraft in particular, but also other kinds of platforms subjected to external, impacting threats, are commonly designed according to increasing survivability requirements. The concept of survivability was first formalized by R. Ball in 1985 in its seminal work on combat aircraft survivability. On the basis of the theory presented in his work, many computer programs have been developed which implement the modelling techniques and computations required by vulnerability assessments. However, a clear and general view of the operative computational procedures is still lacking. Moreover, to date only a limited number of applications to helicopter platforms have been investigated in the survivability field, even though these platforms experience numerous flight conditions exposing the system to different types of threats. In this context, this work aims at establishing a multi-purpose general framework for the vulnerability assessment of different types of platforms subjected to external threats, with a focus on helicopters. The in-house software specifically developed for this application is here described in detail and employed to present a case study on a representative military helicopter.     

常规导弹爆炸高度误差对毁伤效应的影响分析

以典型的常规弹道导弹为例 ,计算了用过载进行爆高控制的控制误差 ,建立了爆炸高度与毁伤效应关系的数学模型 ,通过优化确定了最佳爆高。计算并分析了爆高误差对毁伤效应的影响 ,为爆高控制系统设计和作战运用提供了理论依据     

A method to determine the shell layout scheme for equipment battlefield damage tests under artillery fire

In this paper,a new method for determining the shell layout scheme is proposed,which can make the equipment damage data by the battlefield damage test resemble as close as possible the actual combat data.This method is based on the analysis of the impact point distribution and effective damage area of equipment.In order to obtain the position of the impact points,an impact point distribution model under artillery fire was established.Similarly,in order to obtain the effective damage area of equipment,the concepts of generalized damage area and task-based equipment functional damage probability were demonstrated,and the corresponding calculation model was established.Through case analysis,the shell layout scheme was effectively obtained,verifying the correctness of the proposed method.     

攻击直升机编队火力分配方式及其毁伤效果评估

从联合作战的实际需求出发,根据作战理论以及攻击直升机编队作战指挥特点,将直升机和目标抽象为系统要素及其作用对象,运用系统科学、系统结构分析、作战运筹与系统工程等理论,论证了统一、自主、混合和平行等火力分配方式下空中攻击编队毁伤效果评估模型。通过实例仿真计算和结果对比分析,得到了基于不同火力分配方式的编队毁伤效果的变化特点与规律,以及一系列具有普遍意义的、潜在的、实用的编队火力分配要求与规则。     

基于GPS+GLONASS观测的高精度、快速定位与定向试验

在现代战争中 ,导弹发射阵地的高精度、快速定位与定向是实现灵活机动作战 ,有效地打击敌方目标 ,保障野外实战生存能力的需要。首先 ,重点论述快速构筑导弹发射阵地的实施过程以及GPS +GLONASS组合系统的数据处理方法。最后 ,通过使用连续 2 4h的观测数据分段试验计算 ,结果表明 :利用GPS +GLONASS组合系统 ,在 2 0min时间内可以完成对导弹发射阵地的高精度定位、定向任务