弹道冲击下层合板破坏模式及抗弹性能实验研究

以舰用轻型复合装甲研究为背景,针对不同纤维增强种类(包括玻纤织物 C400、C200、SW220 和芳纶纤维织物T750)以及不同面密度层合板结构,在6.2 g刚性微曲面柱形弹弹道冲击下的防护能力展开实验研究,着重讨论了层合板结构弹道冲击下破坏模式、弹体初始侵彻速度及面密度与抗弹能力和抗弹效率之间的关系,认为不同的破坏模式体现了不同的吸能特性和纤维失效机理.     

基于反馈线性化及滑模控制的俯冲机动制导方法

以高超声速飞行器为研究对象,针对俯冲段精确制导及机动突防问题,基于反馈线性化与滑模控制研究了机动突防滑模跟踪制导方法。首先设计纵向俯冲及侧向机动弹道,其次利用反馈线性化将非线性运动方程转化为线性方程,基于该线性方程利用滑模控制对已设计的弹道进行跟踪,最终将线性跟踪制导律转换到非线性系统中获得非线性滑模跟踪制导律,该制导律完全基于飞行器当前运动状态,所需的相对运动信息大大减少。CAV-H飞行器制导实例仿真表明,该方法能够实现俯冲段精确制导及机动飞行,且对初始及过程偏差具有较强的鲁棒性,能够为高超声速飞行器俯冲段制导提供有益参考。     

先进上面级数字逻辑姿态控制律设计

建立了先进上面级姿态动力学模型和推力器配置方案,根据快速大角速度精确姿态机动的任务要求,设计了数字逻辑姿态控制律.考虑姿态角和姿态角速度的相互关系和测置误差的存在,将姿态相平面划分为多个控制区域,以节省燃料和避免测量误差的影响.在实际上面级参数下进行姿态机动控制仿真,采用数字逻辑姿态控制律能在16s内实现先进上面级俯仰角60°的大角度姿态机动,并能很好地保证姿态指向精度和姿态稳定度,控制效果也优于脉冲宽度调制.     

攻击机突防链型国土防空系统效能分析

封锁式防空和阻击式防空一般采用火力区相互接壤而形成链式防空,链式防空用于疆土防御.根据防空系统的任务和规模(国土防空、部队战场防空、海上舰队防空)以及入侵方式、武器性能特点的不同.基于随机理论建立了敌方采用同类武器组成链式防空体系,攻击机采用火力对抗条件下的国土突防模型.对基于随机理论的攻击机突防链型国土防空系统效能进行了一些假设和简化,建立了初步的效能模型,提供了一个分析的思路和方法.     

长杆射弹对钢纤维混凝土靶开坑特性的实验研究

为考察射弹对钢纤维混凝土靶的侵彻特性,采用57mm轻气炮,进行了小尺寸模拟射弹对钢纤维混凝土靶(钢纤维的体积分数为2%)的侵彻实验。实验中观察了钢纤维混凝土靶的开坑形状,测量了射弹的击靶速度,并且采用注沙法测出靶体的开坑体积,计算出射弹对靶体的侵彻体积,得到了长杆射弹的动能与侵彻体积的关系。引入射弹单位面积的冲击动能和靶体单位侵彻体积的冲击动能,结合钢纤维混凝土靶的实验数据,考察了两者之间的关系。     

机动目标建模及机动检测算法

为解决机动目标跟踪问题,建立了非机动(匀速直线运动)和机动目标当前统计两种动态模型,并对机动目标当前统计模型的输入控制的估计进行了适当改进.同时对非机动模型的观测残差和机动模型的输入估计进行检验,以便准确检测目标机动.     

Round robin using the depth of penetration test method on an armour grade alumina

The depth of penetration (DOP) method is a well-known ballistic test method for characterisation and ranking of ceramic armour materials. The ceramic tile is bonded to a backing material of semi-infinite thickness, and the penetration depth of the projectile gives a measure of the performance of the ceramic. There is, however, an inherent variability in the results from this test method. In this work, the accuracy and the variability of the DOP method has been investigated in a round robin exercise. Six ballistic test centres took part in the exercise. A test protocol was developed, in which the threat type (projectile and impact conditions) and a procedure on how to prepare the targets were specified. The targets consisted of alumina tiles of two different thicknesses that were bonded to polycarbonate backing cubes. Two different 7.62 mm armour piercing projectiles were employed; one with a hard steel core and one with a tungsten carbide core. The projectiles and the other materials all came from single material batches in order to avoid batch-to-batch variations in material properties. These materials were distributed between the ballistic test centres. The test results of the different ballistic test facilities were collected and compared. There was not a lot of variation between the average DOP values obtained at each laboratory, but the variation in penetration depth between shots was high. The consequence of this variation may be less confidence in the test results, and a statistical method was used to evaluate the required number of tests that are sufficient to obtain an average result with high confidence. In most cases, the required number of tests is much higher than what is practically feasible. This work was conducted as part of the European Defence Agency-project CERAMBALL.     

运动视觉平台点目标定位误差分析和平台最优运动轨迹设计

对运动视觉平台点目标定位问题进行了研究,介绍了基于视觉共线方程的目标定位方法,分析了共线方程关于视线约束的实质。在观测视线相关坐标系推导了视线方向角矢量对目标定位误差的影响规律,分析了多观测对定位误差的影响,并基于最小化目标定位误差推导了视觉平台的最优运动轨迹,利用简单明了的分析方法得到了与已有文献优化Fisher信息矩阵方法一致的结论。利用仿真和试验对定位误差和最优轨迹进行了验证,证实了定位误差理论分析和最优运动轨迹设计的正确性。     

‘Innovate or die’: Organizational culture and the origins of maneuver warfare in the United States Marine Corps

The purpose of this article is twofold. First, this article contributes to the understanding of the origins of maneuver warfare as the capstone doctrine of the Marine Corps. It does so by identifying a second source that fostered change in the Marine Corps – one in addition to disquiet about the conduct of the war in Vietnam – which stemmed from the challenges posed by the United States' post-Vietnam strategic and military reorientation. And second, this article examines the influence of organizational culture, or identity, on innovation in the Marine Corps. A critical strand in the growing literature on military innovation focuses on organizational culture and how it influences the behavior and responses of particular military organizations. This article contributes to this literature by analyzing the influence of the organizational culture of the Marine Corps in shaping what was deemed an appropriate response to the challenges it confronted in the 1970s.     

现代海战中国外“矛”与“盾”武器的博弈

反舰导弹（矛）与舰载反导武器（盾）之间的斗争是现代海战重要格局之一。美俄二大军事大国在矛与盾的发展上,均以对方为假想敌,研究使自己的矛如何突防对方的盾,以及自己的盾如何拦击对方的矛。由于历史条件,国家政治需要和本国的技术优势不同,二国发展矛与盾的指导思想和设计准则,以及在攻防策略上都有很大不同。文章从深层次分析这些不同特点,并探讨它们的发展走向。