粉末粒度对储氢电极电化学性能的影响

以M1（NiCoMnTi）5为例,系统研究了粉末粒度对储氢电极电化学性能的影响。结果表明,在试验粒度范围内,合金粉越细,其放电容量越高,高倍率放电性能和循环稳定性也越好;将两种不同粒度的合金粉混合使用时,粒径相差越大,其放电容量越高。且当粗细粉质量比为7：3时,放电容量最高。     

金属风暴武器系统在近程防御中的应用

分析了金属风暴在近程防御应用上的使命任务,指出其必要性和可行性.同时设想了该武器系统的系统组成和功能设置.重点指出了应用该武器系统需要解决的一些关键技术.最后通过与现有近程反导武器相比,分析了其优势所在.为今后近程防御提供了一种新思路.     

轴向应力对铁磁材料磁极性影响研究

为研究外加应力作用下铁磁材料磁极性变化规律,制作Q235钢轴状静载拉伸试件,在MTS810型液压伺服试验机上进行正向或反向多级加载,采用EMS2003金属磁记忆仪检测拉伸过程试件表面磁记忆信号变化,分析加载顺序、加载次数及应力大小对磁极性影响。研究结果表明：同一加载方向上试件磁极性不变,加载应力大小决定磁极性强弱,正反方向加载试件产生相反的磁极性。同一加载方向、同一加载应力条件下,加载次数不影响磁极性;改变加载方向,加载应力需逆转磁畴结构取向,加载次数增多使磁极性略有增强。     

多爆炸成型弹丸性能参数灰关联分析

为了获得各参数对多爆炸成型弹丸毁伤性能的影响程度,以EFP速度和MEFP发散角为参考序列,以药型罩和装药参数为比较序列,运用灰关联理论对影响MEFP毁伤性能的参数进行了灰关联分析。在此基础上,应用灰关联分析结果完成了MEFP战斗部优化设计。结果表明:在较少样本空间前提下,采用灰关联理论可以分析获得影响多爆炸成型弹丸毁伤性能的各因素主次关系,而且经过优化后的MEFP战斗部,大大地提高了EFP的集聚性和毁伤性能。     

Effect of wave shaper on reactive materials jet formation and its penetration performance

Wave shaper effect on formation behavior and penetration performance of reactive liner shaped charge (RLSC) are investigated by experiments and simulations. The reactive materials liner with a density of 2.3 g/cm³ is fabricated by cold pressing at a pressure of 300 MPa and sintering at a temperature of 380 °C. Experiments of the RLSC with and without wave shaper against steel plates are carried out at standoffs of 0.5, 1.0, and 1.5 CD (charge diameter), respectively. The experimental results show that the penetration depths and structural damage effects of steel plates decrease with increasing the standoff, while the penetration depths and the damage effects of RLSC without wave shaper are much greater than that with wave shaper at the same standoff. To understand the unusual experimental results, numerical simulations based on AUTODYN-2D code are conducted to discuss the wave shaper effect, including the propagation behavior of detonation wave, the velocity and temperature distribution of reactive jet, and penetration depth of reactive jet. The simulations indicate that, compared with RLSC without wave shaper, there is a higher temperature produced inside reactive jet with wave shaper. This unusual temperature rise effects are likely to be an important mechanism to cause the initiation delay time of reactive jet to decline, which results in significantly decreasing its penetration performance.     

Heavy metal free primers: Polymorphism of gadolinium and titanium in the context of GSR glass phase

The possibility of identifying gunshot residue (GSR) particles produced by non-toxic primers containing only titanium and zinc is a very difficult task using SEM/EDX analysis employed in the analysis of GSR originating from primers containing lead, barium and antimony. However, Bauer et al. demonstrated that non-toxic (TiZn) primers form a TiZn₂O₄ spinel crystalline structure using SEM/EDX with EBSD (Electron Back Scatter Diffraction) and TKD (Transmission Kikuchi Diffraction), whereas GSR originating from gadolinium-doped TiZn primers form a non-crystalline glass phase. Here, a possible explanation of these different phenomena is hypothesized.     

铝基水反应金属燃料性能初步研究

提出水反应金属燃料双反应区模型,结合化学反应过程对其进行了热力特性分析,初步研究了铝基水反应金属燃料配方等因素对发动机性能的影响。     

碱性焊条药皮处理条件对焊缝金属扩散氢影响的研究

对降低手工焊条熔敷金属扩散氢的研究多是从原材料及冶金方面考虑的,在工艺上则统一要求焊条烘干后立即使用.这样,焊条从出厂到被使用过程中总会被烘干2～3次,这种重复烘干对扩散氢的影响尚未有人探讨过.针对这种情况,研究了碱性焊条在不同药皮处理条件(主要是烘干次数不同)下焊缝金属中的扩散氢.试验结果及分析表明,经重复烘干─吸潮─烘干处理后,焊条药皮中吸水性强的Na+吸水行为受到限制,从而熔敷金属中的扩散氢显著降低.     

污水中重金属离子浓度软测量的BP算法

在重金属离子检测仪器及其工作原理研究的基础上,对污水中重金属离子浓度测量方法进行了分析研究,分析了采用软测量技术的可行性和必要性,针对水质测量具有非线性、大时变和多滞后的特点,提出了基于BP神经网络的污水中重金属离子浓度软测量建模方法,建立了软测量模型,并通过仿真分析和实验验证了该方法的实用性.     

金属膜陶瓷膜净水技术试验研究

试验研究了金属膜陶瓷膜净水的主要影响因素及变化规律,提出了用金属膜陶瓷膜净水工艺替代传统的加药混凝、沉淀过滤净水工艺的水处理系统。重点研究了不同种类金属膜对浊度物质的去除、膜压差及膜渗透通量随时间的变化规律;陶瓷微滤膜渗透通量、出水浊度随时间的变化规律及在不同膜压差、不同进口流量的情况下膜渗透通量随时间的变化规律。试验表明了金属膜陶瓷膜具有良好的过滤性能。