齿轮箱振动测试与分析

在对某型齿轮箱的模态、振动烈度和振动加速度进行测试的基础上,详细分析了测试结果.模态测试得到了齿轮箱的振型和模态参数,振动烈度测试结果表明该齿轮箱处于良好工作状态,振动加速度测试结果显示该齿轮箱的减振措施达到了预期的效果.最后,对测试提出了建议.     

光电指向器水平度测量算法

通过对光电跟踪仪安装时水平度调整方法的研究,提出了利用坐标变换算法,用以实现光电跟踪仪安装时水平度的快速调整.利用该算法不但可以减少安装时的测量次数,节约安装调整时间,而且提高了设备安装时的测量精度,具有广泛的推广应用价值.文中还对该方法的测量计算误差进行了分析.     

A critical look at the U.S. deceased‐donor organ procurement and utilization system

The U.S. system for procuring and utilizing deceased‐donor organs for transplantation has been studied and written about in many articles. The purpose of this paper is to examine the interactions between the elements that comprise this system, and point out improvement opportunities that may be affected through operations research/management techniques. The authors demonstrate the need for developing data‐driven and analytic tools. In fact, data is used to generate hypotheses and support claims throughout the paper. The paper also points out the need to fully leverage data that is available to researchers, and to seek data that is currently not deposited in a centralized archive.     

Ricochet quantification using a multiple sensor approach

This study investigates the ricochet behaviour of three different small-arms projectile types using a novel ricochet measuring device.The results can be used to estimate the danger potential of ricochets on shooting ranges.A ricochet is the change of direction and velocity of a projectile after impacting an oblique surface.This impact produces strong vibrations on a rigid plate.During this impact,flexural waves travel radially outwards from the point of impact.These waves are used to determine the properties of the impactor with accelerometers situated on the target surface.With the use of two measurement plates,one can produce a ricochet and detect the velocity at the same time.Accelerometers are suitable for accurate momentum measurements of single impacts.However,depending upon strike velocity and the impact angle,a ricochet can separate in multiple fragments after being deflected.From the operational safety perspective,these fragments need to be detected,as well.The approach of a coupled sensor concept was chosen to solve this problem.Thermographic sensors were additionally used to visualise the heat which is produced after pene-trating a rubber layer pasted in front of the steel target plate.With this approach one was able to detect the position of impact.The investigations showed that the measurement system performance is better with a multiple sensor design,which includes accelerometers for the velocity,impact strength and partly the position measurement,while the thermographic sensor was used for the position measurement and partly the momentum measurement.The investigated ammunition showed plausible fragmentation behaviour,and the results can already be used to estimate the danger potential of different ammunition types.Frangible projectiles fragment to small particles already after being deflected under a small angle.However,Full Metal Jacket projectiles with or without a steel core do not fragment under angles which are less than 5°.The objective of the paper is to demonstrate the possibility of measuring the complex ricochet me-chanics of small projectiles using standard accelerometers with the adequate signal processing approach.This measuring system is supported by an off the shelf thermographic camera.     

A novel launch dynamics measurement system for multiple launch rocket system and comparative analysis with numerical simulations

In this paper,a novel launch dynamics measurement system based on the photoelectric sensor pair is built.The actual muzzle time(i.e.a time duration that originates from the initial movement to the rocket's departure from the muzzle)and the muzzle velocity are measured.Compared with the classical methods,the actual muzzle time is obtained by eliminating the ignition delay.The comparative analysis method is proposed with numerical simulations established by the transfer matrix method for multibody systems.The experiment results indicate that the proposed measurement system can effectively measure the actual muzzle time and reduce the error of classical methods,which match well with the simulation results showing the launch dynamics model is reliable and helpful for further analysis and design of the MLRS.     

基于调制/解调的动态响应测试方法

在磁悬浮列车中,悬浮控制系统要求间隙传感器的动态特性,但无法用机械方法测试较高频率时的动态特性。根据传感器工作机制,用模拟涡流场来代替被测导体的涡流效应,提出基于调制/解调原理的动态特性测试方法,并分别对正弦信号和方波信号的测试方法进行了探讨。最后给出了两种特征信号的传感器动态特性测试结果。实验表明,这种方法能够满足测试要求,相对于机械方法有很大的优越性。     

风洞现场电磁干扰测量研究

根据风洞现场测控系统的特点,对风洞现场的电磁干扰测量方法和技术进行研究,并在风洞中进行试验,得到了相关的试验数据．通过对数据的分析可以得出：影响风洞现场测控系统的电磁干扰源主要是大功率变频装置,耦合途径为空间辐射和电源线传导．     

压缩感知理论与光学压缩成像系统

压缩感知理论为提升信息获取能力提供了新的思路,它表明当被探测信号具有稀疏性时,则获取信号所必需的测量数据与其稀疏度K量级相当,而远小于信号的维数N(Shannon采样定理所要求的采样数)。基于压缩感知理论的成像技术(压缩成像)则将感知、压缩和数据处理三个过程完美地结合在一起,避免了传统成像系统"先采样再压缩"方式带来的传感器和计算资源浪费。本文从稀疏性、投影测量矩阵的设计与可重构条件、压缩感知重构算法三个方面概述了压缩感知理论及进展,并以光学成像为背景,详细阐述了最近提出的几类光学压缩成像系统,最后,探讨了压缩感知及压缩成像方面目前所面临的一些挑战性问题。     

美国“深绿”计划对指挥控制的影响

“深绿”计划是美国国防部高级研究计划署为满足现代战争对快速决策的需求而提出的.“深绿”计划的目的是将仿真嵌入指挥控制系统,利用仿真支持正在进行的军事行动.通过对深绿体系结构、实现深绿的关键技术以及深绿实施方案的分析,重点研究了深绿计划对指挥控制的影响.该研究力图为我军作战指挥决策支持系统的建设提供方法和技术上的启发及借鉴.     

抗差最小二乘估计在惯组外场标定中的应用

惯组在外场进行标定时常常会受到环境的振动干扰,从而会对惯组的标定精度造成极大的影响.为解决这一问题,在分析了粗差对惯组标定精度影响的前提下,建立了一种改进的辨识惯组误差系数的数学模型,使其能够分辨出那些受到振动干扰影响的惯组误差系数.最后利用抗差最小二乘估计对惯组误差系数进行处理,通过等价权函数的连续降权和连续减弱影响处理,抵制了异常数据对惯组标定精度的影响.仿真结果表明,抗差最小二乘估计具有很强的抗差能力,能有效减弱异常干扰对参数估计的影响,提高惯组外场标定的精度和数据的可靠性.