基于并行模拟的多核集群系统性能预测和分析

针对多核集群系统所表现出的新的性能特征,提出了面向多核集群系统消息传递应用程序的并行模拟模型并设计、实现了一个并行模拟器MCPSim(Multi-core Cluster Parallel Simulator),MCPSim在功能模型和性能模型上体现了片内核间、结点内片间以及结点间等三个层次上消息通信的特点,同时支持对应用的消息数量、通信量等的百分比分布的profiling功能,采用PRIMEJ、acobi3D、NPB IS以及HPL等Benchmark程序对MCPSim进行了测试,结果表明MCPSim性能预测的精度优于BigSim,同时能够广泛应用于针对多核集群系统消息传递应用程序的性能分析中。     

关于半鞅向量随机积分的两个结果

首先利用半鞅Girsanov定理与闭图像定理证明了:若{Xn}是带滤基的完备概率空间(Ω,F,F,P)中的一列半鞅,其中滤基F=(Ft)t≥0满足通常条件,且{Xn}在关于P的Emery拓扑空间中收敛于X,则当概率测度Q相似文献   

YHCAPP系统工艺信息提取和工序图生成技术研究

YHCAPP系统是面向中小企业的工具型CAPP系统,如何从CAD图形提取工艺信息和生成工序图是该类系统的一个难点。文中给出了一种基于表达式求值的方法,成功解决了该难题,实际应用表明该方法稳定可靠。该方法也为一般的工具型CAPP系统提供了新思路。     

二维超声速空气引射器启动特性试验研究

超声速引射器是高空模拟试车台的重要组件,在发动机启动前利用引射器对试验舱预抽真空,可避免发动机启动初始时刻燃气漏入试验舱造成燃气在发动机中分离,对获取发动机在高空环境下的完整推力特性具有重要意义。而该工况下超声速引射器的启动过程是引射器工作过程中最为恶劣的工况,设计不合理的引射器会导致启动压力过高甚至不能实现启动。建立了缩比超声速空气引射器试验台对超声速引射器的启动特性进行研究,采用压力测量方法结合纹影技术对超声速引射器处于极限启动压比时的流场进行了描述,研究结果表明混合室收缩比越小,引射器极限启动压比越低。同时给出了定位超声速引射器不启动原因的判据:当引射器不启动是由引射总压不足引起时,盲腔压力在引射总压提高时降低,并在临界启动状态下达到最小值;而由混合室收缩比过小导致的引射器不启动在引射总压提高时盲腔压力单调上升。     

RTI测试研究

运行支撑系统(RTI)作为应用高层体系结构(HLA)进行分布仿真的支撑系统,是实现HLA的核心。RTI的功能和性能直接关系到HLA仿真系统开发与应用的成败。首先阐述了RTI测试的内容和指标,接着结合例子详细研究了RTI测试的方法,最后对RTI测试研究进行了总结,为提高基于HLA的分布交互仿真系统的质量及可信度提供了基础。     

Determination of burn‐in parameters and residual life for highly reliable products

Today, many products are designed and manufactured to function for a long period of time before they fail. Determining product reliability is a great challenge to manufacturers of highly reliable products with only a relatively short period of time available for internal life testing. In particular, it may be difficult to determine optimal burn‐in parameters and characterize the residual life distribution. A promising alternative is to use data on a quality characteristic (QC) whose degradation over time can be related to product failure. Typically, product failure corresponds to the first passage time of the degradation path beyond a critical value. If degradation paths can be modeled properly, one can predict failure time and determine the life distribution without actually observing failures. In this paper, we first use a Wiener process to describe the continuous degradation path of the quality characteristic of the product. A Wiener process allows nonconstant variance and nonzero correlation among data collected at different time points. We propose a decision rule for classifying a unit as normal or weak, and give an economic model for determining the optimal termination time and other parameters of a burn‐in test. Next, we propose a method for assessing the product's lifetime distribution of the passed units. The proposed methodologies are all based only on the product's initial observed degradation data. Finally, an example of an electronic product, namely contact image scanner (CIS), is used to illustrate the proposed procedure. © 2002 Wiley Periodicals, Inc. Naval Research Logistics, 2003     

大型相控阵雷达系统安全性综合评价

针对大型相控阵雷达系统安全性因素多、评价困难的特点，分析并建立了大型相控阵雷达系统安全评价指标体系。提出了一种基于改进模糊层次分析法、熵权法和拉格朗日算法确定综合权重的方法，并建立了雷达系统安全性模糊综合评价模型。以某型大型相控阵雷达系统的安全性评价为例，运用所提方法确定该雷达系统的安全性指标综合权重，并进行安全性综合评价。将该方法与传统AHP评价法进行对比分析，验证了该方法的科学性和合理性。     

Effect of wave shaper on reactive materials jet formation and its penetration performance

Wave shaper effect on formation behavior and penetration performance of reactive liner shaped charge (RLSC) are investigated by experiments and simulations. The reactive materials liner with a density of 2.3 g/cm³ is fabricated by cold pressing at a pressure of 300 MPa and sintering at a temperature of 380 °C. Experiments of the RLSC with and without wave shaper against steel plates are carried out at standoffs of 0.5, 1.0, and 1.5 CD (charge diameter), respectively. The experimental results show that the penetration depths and structural damage effects of steel plates decrease with increasing the standoff, while the penetration depths and the damage effects of RLSC without wave shaper are much greater than that with wave shaper at the same standoff. To understand the unusual experimental results, numerical simulations based on AUTODYN-2D code are conducted to discuss the wave shaper effect, including the propagation behavior of detonation wave, the velocity and temperature distribution of reactive jet, and penetration depth of reactive jet. The simulations indicate that, compared with RLSC without wave shaper, there is a higher temperature produced inside reactive jet with wave shaper. This unusual temperature rise effects are likely to be an important mechanism to cause the initiation delay time of reactive jet to decline, which results in significantly decreasing its penetration performance.     

H2O2/HTPB固液混合发动机点火试验研究

利用H2O2催化分解原理,设计了烃类燃料在催化分解的90%H2O2中能燃烧的点火器,然后采用该点火器进行H2O2/HTPB固液混合发动机点火试验研究.试验结果表明,该点火器能够成功启动H2O2/HTPB固液混合发动机,且当混合比偏离最佳混合比后,发动机的燃烧效率降低.     

顶置武器站性能评估方法

在评估指标体系和虚拟样机仿真测试评估数据的基础上,对顶置武器站性能评估进行研究。对评估方法进行研究,提出了适合顶置武器站性能评估特点的灰色模糊综合评估法,选用灰色关联度分析计算指标权重,建立开放性的隶属矩阵,最终建立顶置武器站性能评估模型。通过实例评估表明该评估模型准确可靠。