论师范院校语文教育理论课教学改革和实验

语文教育理论课普遍存在教学结构不合理 ,理论体系和技能训练体系不完整 ,缺乏系统性和科学性 ,理论传授与能力训练相脱节等问题 ,影响了教学质量的提高 ,制约了教学改革的展开。本文对该课程的教学结构进行重新审视、梳理 ,将之划分为两个系统 ,并将其各自要素及相互关系进行分析 ,论证了理论知识系统与教学技能训练系统在教学过程中相互对应 ,同步进行 ,共同深化的科学性和可行性。     

加强党性党风建设 提高党员干部的整体水平

党性党风建设历来是我党高度重视的一个问题。高校领导干部亦不例外。目前 ,高校基层党员干部普遍存在政治理论水平不高 ,道德修养变形 ,党的意识淡薄等现象。要想提高高校基层党员干部党性党风建设的整体水平 ,就必须加强对其进行政治理论教育和道德教育 ,同时加强制度建设。唯有此 ,才能提高基层管理者的管理水平和整体办学层次     

海水中电磁波的弯曲

利用导电媒质中的斯耐尔定律 ,研究了电磁波在空气—海水界面的行为及在海水中的传播情况 ,得出了低频电磁波总是沿垂直海面的方向向海里传播 ,在存在温度梯度的情况下电磁波在向海底传播过程中会发生弯曲的结论     

基于Neumann谱和PM谱的海浪感应磁场能量分布计算

结合前人在海浪功率谱以及海浪产生磁场两方面的研究 ,求出了海浪 磁场系统的传递函数 ,分析了该系统的性质 ,并利用该传递函数和Neumann谱、PM谱计算了磁场功率谱 ;在此基础上 ,根据实际观测我国海区的海浪高度 周期分布 ,求解海浪分布参数 ,模拟实际的海浪过程 ,求出了实际情况下的海浪感应磁场功率谱 ,并分析了其特性 .     

Preservation of unimodality under shock models

A number of results pertaining to preservation of aging properties (IFR, IFRA etc.) under various shock models are available in the literature. Our aim in this paper is to examine in the same spirit, the preservation of unimodality under various shock models. For example, it is proved that in a non-homogeneous Poisson shock model if {p_k}_K≥0, the sequence of probabilities with which the device fails on the kth shock, is unimodal then under some suitable conditions on the mean value function Λ (t), the corresponding survival function is also unimodal. The other shock models under which the preservation of unimodality is considered in this paper are pure birth shock model and a more general shock model in which shocks occur according to a general counting process. © 1999 John Wiley & Sons, Inc. Naval Research Logistics 46: 952–957, 1999     

分布交互仿真技术在作战理论研究中的应用

介绍了分布交互仿真技术的发展现状,对应用分布交互仿真技术进行作战理论研究的问题进行了探讨。     

Experimental study on explosion dispersion process of a multi-layer composite charge under different initiation modes

The influence of initiation modes on the explosive dispersion process of the multi-layer composite charge (MCC) was studied. Overpressure sensors and high-speed photography system were used to investigate the energy release process of an MCC with a specific structure. The shock wave pressure and explosive dispersion characteristics of the MCC under different initiation modes were compared. The forming and expanding process of the shock wave of the composite charge under different initiation modes was determined. The separation position of the shock wave and fireball interface was determined. The calculation formulas of the shock radius and overpressure of the composite charge are presented. The radius of the shock wave of the composite charge was significantly affected by the initiation mode. Moreover, the development process of the composite explosive fireball under different initiation modes was analyzed, the variation rules of the composite charge dispersion radius and fireball dispersion velocity with time were obtained under the different initiation modes, the explosion energy release rate of composite charge under simultaneous initiation modes was the highest, and the peak overpressure under the simultaneous initiation mode was 1.61 times that of central single-point initiation.     

Investigation on energy output structure of explosives near-ground explosion

In order to give the energy output structure of typical explosives near-ground explosion in real ground conditions, the free-field shockwave, ground reflection shockwave and Mach wave overpressure time history of composition B explosive, RDX explosive and aluminized explosive were measured by air pressure sensors and ground pressure sensors. The shape of the free-field shock wave, ground reflection shock wave, and Mach wave and explosion flame were captured by high-speed camera. The experimental results show that, at the same horizontal distance from the initiation point, the peak overpressure of explosive shock wave of composition B explosive, both in the air and on the ground, is less than that of RDX and aluminized explosives. At a distance of 3.0 m from the initiation point, the peak overpressure of aluminized explosives is slightly less than that of RDX explosives. Owing to the exothermic effect of aluminum powder, the pressure drop of aluminized explosives is slower than that of RDX explosives. At 5.0 m from the initiation point, the peak overpressure of aluminized explosives is larger than that of RDX explosives. At the same position from the initiation point, among the three kinds of explosives, the impulse of aluminized explosives is the maximum and the impulse of composition B explosives is the minimum. With the increase of the horizontal distance from the initiation point, the height of Mach triple-points (Mach steam) of the three explosives increases gradually. At the same horizontal distance from the initiation point, there is poorly difference in the height of Mach triple-points between aluminized explosive and RDX explosive, and the height of Mach triple-points of composition B explosive is much smaller than that of other two explosives. The maximum diameter and duration of the fireball formed by aluminized explosives are the largest, followed by composition B explosive, and the maximum diameter and duration of the fireball formed by RDX explosive are the smallest.     

Effect of microstructure on short pulse duration shock initiation of TATB and initial response mechanism

Micro-TATB particles with different sizes and 3D nanoporous TATB architectures with different specific surface areas were prepared through recrystallization to study short pulse duration shock initiation properties by electric gun technology. For micro-TATB, the initiation threshold significantly decreases with TATB average size ranging from 79.7 μm to 0.5 μm. For 3D nanoporous TATB architecture, the initiation threshold decreases and then increases with specific surface areas increased from 9.6 m²/g to 36.2 m²/g. The lowest initiation thresholds are obtained for the micro-TATB with average sizes of 1.3 μm and 0.5 μm, and 3D nanoporous TATB architecture with specific surface area of 22.4 m²/g. The shock initiation thresholds of micro-TATB and 3D nanoporous TATB architectures show significantly decreases with the porosity increased. The decomposition reaction and thermal conductivity properties were further investigated to understand the initial response mechanism. High porosity provides more collapse sites to generate high temperature for formation of hot spots. The low thermal conductivity and decomposition temperature could enhance the formation and ignition of the hot spots, and initial decomposition reaction of TATB. The effect of the decomposition temperature is higher than that of the thermal conductivity on the shock initiation properties. The enhanced decomposition reaction could promote energy release and transfer process from the ignition to the combustion. This work offers a new insight to understand the effects of microstructure on the shock initiation properties and the initial response mechanism of TATB.     

Inventory transshipment game with limited supply: Trap or treat

Inventory transshipment is generally shown to be beneficial to retailers by matching their excess demand with surplus inventory. We investigate an inventory transshipment game with two newsvendor-type retailers under limited total supply and check whether the retailers are better off than the case without transshipment. We derive the ordering strategies for the retailers and show that unlike the unlimited supply case, a pure Nash equilibrium only exists under certain conditions. Furthermore, contrary to the conventional wisdom, we show that inventory transshipment may not always benefit both retailers. Although one of the retailers is guaranteed to be better off, the other could be worse off. The decision criteria are then provided for the retailers to determine if they will benefit from the exercise of inventory transshipment. Numerical study indicates that the carefully chosen transshipment prices play an important role in keeping inventory transshipment beneficial to both retailers. Subsequently, a coordinating mechanism is designed for the retailers to negotiate transshipment prices that maximize the total profit of the two retailers while keeping each of them in a beneficial position.