基于压力控制的常分离式双离合器膜片弹簧设计与仿真

为了保证干式双离合器在摩擦片磨损后仍能可靠传递扭矩,首先利用解析法对常分离式膜片弹簧载荷-变形特性进行理论分析,提出了基于压力控制的膜片弹簧磨损后压力保持方法,其次通过优化设计对膜片弹簧的结构参数进行了优化,并利用MSC.Patran/Marc软件对优化后常分离式离合器膜片弹簧工作过程进行了有限元接触仿真,最终得到了更符合实际工况的膜片弹簧载荷-变形特性曲线。结果表明：经过优化后的膜片弹簧,采用压力控制方法,摩擦片磨损后无需机械补偿,仍能保证扭矩的可靠传递。     

基于SNR的烟幕干扰效果仿真

烟幕对红外等电磁波具有吸收、反射和散射特性,可导致导引头上接收的能量大大衰减,从而降低导弹的命中概率.针对外场烟幕性能测试受气象条件和环境因素的影响较大,对准确评估抗红外烟幕遮蔽性能存在较大困难的情况,结合气象条件从烟幕透过率的变化引起导引头信噪比变化的角度,建立了烟幕干扰效果的评估模型,通过计算机仿真,得出了烟幕对红外制导导弹的干扰效果.通过试验对其中的一些结论进行了实验验证,结果表明计算结果能够与实验数据较好吻合.     

Signal‐to‐interference‐plus‐noise ratio estimation for wireless communication systems: Methods and analysis

The Signal‐to‐Interference‐plus‐Noise Ratio (SINR) is an important metric of wireless communication link quality. SINR estimates have several important applications. These include optimizing the transmit power level for a target quality of service, assisting with handoff decisions and dynamically adapting the data rate for wireless Internet applications. Accurate SINR estimation provides for both a more efficient system and a higher user‐perceived quality of service. In this paper, we develop new SINR estimators and compare their mean squared error (MSE) performance. We show that our new estimators dominate estimators that have previously appeared in the literature with respect to MSE. The sequence of transmitted bits in wireless communication systems consists of both pilot bits (which are known both to the transmitter and receiver) and user bits (which are known only by the transmitter). The SINR estimators we consider alternatively depend exclusively on pilot bits, exclusively on user bits, or simultaneously use both pilot and user bits. In addition, we consider estimators that utilize smoothing and feedback mechanisms. Smoothed estimators are motivated by the fact that the interference component of the SINR changes relatively slowly with time, typically with the addition or departure of a user to the system. Feedback estimators are motivated by the fact that receivers typically decode bits correctly with a very high probability, and therefore user bits can be thought of as quasipilot bits. For each estimator discussed, we derive an exact or approximate formula for its MSE. Satterthwaite approximations, noncentral F distributions (singly and doubly) and distribution theory of quadratic forms are the key statistical tools used in developing the MSE formulas. In the case of approximate MSE formulas, we validate their accuracy using simulation techniques. The approximate MSE formulas, of interest in their own right for comparing the quality of the estimators, are also used for optimally combining estimators. In particular, we derive optimal weights for linearly combining an estimator based on pilot bits with an estimator based on user bits. The optimal weights depend on the MSE of the two estimators being combined, and thus the accurate approximate MSE formulas can conveniently be used. The optimal weights also depend on the unknown SINR, and therefore need to be estimated in order to construct a useable combined estimator. The impact on the MSE of the combined estimator due to estimating the weights is examined. © 2004 Wiley Periodicals, Inc. Naval Research Logistics, 2004     

旋成体跨音速脉动压力环境分析与预测

脉动压力是进行结构响应分析和力学环境研究的重要依据。利用平均流场的数值模拟方法与基于实验的工程预测模型相结合的技术途径,对跨音速下旋成体的表面脉动压力环境进行了分析与预测,给出了旋成体在不同攻角、不同马赫数条件下表面脉动压力系数分布以及脉动压力功率谱分布曲线,并且与实验结果作了比较分析,得出结论基本一致。     

Failure profiles of coherent systems

In this paper we first introduce and study the notion of failure profiles which is based on the concepts of paths and cuts in system reliability. The relationship of failure profiles to two notions of component importance is highlighted, and an expression for the density function of the lifetime of a coherent system, with independent and not necessarily identical component lifetimes, is derived. We then demonstrate the way that failure profiles can be used to establish likelihood ratio orderings of lifetimes of two systems. Finally we use failure profiles to obtain bounds, in the likelihood ratio sense, on the lifetimes of coherent systems with independent and not necessarily identical component lifetimes. The bounds are relatively easy to compute and use. © 2004 Wiley Periodicals, Inc. Naval Research Logistics, 2004     

光纤激光水听器的PGC实时全数字解调系统

概述了基于麦克尔逊干涉仪的光纤激光水听器的相位载波零差法(PGC)调制解调原理,通过数学推导及仿真,分析了调制信号和混频信号的频差是导致全数字化解调结果错误的主要因素之一。针对该诱导因素提供了可行的解决方案,并实现了基于DSP的1 MHz采样频率下使用PGC方法的全数字实时解调系统。对低频水声波段800Hz水声信号进行解调,实验结果表明:解调信号波形良好。     

高灵敏度GPS软件接收机捕获算法

针对传统方法难以实现室内环境下GPS信号的捕获以及传统弱信号捕获算法的一系列弊端,介绍了一种新的捕获算法。由于数据段通过“先累加后相关”的方式进行相干积分可以减少运算量,以此方法改进的半位捕获法进行数据段选择可以避免导航数据位翻转,并且改进后的差分相干积分能够减小非相干积分造成的“平方损失”和改善信噪比,融合上述优点,提出了一种新的算法,为高灵敏度GPS软件接收机的实现提供了保证。仿真结果表明,此算法极大的提高了接收机的捕获性能,并且能够快速捕获到载噪比低至25dB/Hz的微弱信号。     

信息熵和判断矩阵的专家聚类赋权法

为了降低专家聚类赋权过程中由排序向量引起的不确定性和判断矩阵引起的矛盾性,提高权值分配的精确性,提出了基于信息熵和判断矩阵相结合的专家聚类赋权法。该方法采用聚类分析原理,对排序向量进行分类,根据分类结果、信息熵值和一致性比率确定专家权重系数。实例分析表明:基于信息熵和判断矩阵相结合的专家聚类赋权法在具体应用中得到的结果离期望值更近,说明该算法有效可行。     

防御技术的新发展和新问题

讨论了在体系对抗条件下,导弹防御系统所碰到的新问题和面临这些问题应当研究的新技术。这些新技术不仅包括精确化、小型化和武器网络化,而且也包括目标识别、光电对抗和对抗效费比等。     

星载双基地SAR系统模糊性

针对星载双基地SAR由双基地几何关系引入的新问题,提出了计算其模糊比的新方法和近似分解方法。利用此方法通过仿真计算对星载双基地SAR模糊性变化规律做了进一步研究。结果表明,因接收天线的面积限制,与其伴随飞行的大卫星SAR相比,模糊性问题更为严重,但变化规律基本一致。比较而言,由于小卫星天线尺寸在高度上更接近大卫星天线,在距离模糊比上相对大卫星SAR抬高得不多,而在方位模糊比上抬高较大。