钢筋混凝土楼板耐火当量时间研究

从隔热性方面研究钢筋混凝土楼板的耐火极限，以室内火灾轰燃后的房间热平衡和热传导理论为基础，以钢筋混凝土楼板火灾中背火面的最高温度相等为原则，用计算机数值分析方法计算出楼板的隔火当量时间，并用最小二乘法回归出当量时间关于火灾荷栽密度和开口因子的计算公式，结果可使设计方法得到简化，为性能化耐火设计提供一定的参考。     

Experimental investigation on dynamic response and damage models of circular RC columns subjected to underwater explosions

Reinforced concrete (RC) columns are widely used as supporting structures for high-piled wharfs. The study of damage model of a RC column due to underwater explosion is a critical issue to assess the wharf’s antiknock security. In this study, the dynamic response and damage model of circular RC columns subjected to underwater explosions were investigated by means of scaled-down experiment models. Experiments were carried out in a 10.0 m diameter tank with the water depth of 2.25 m, under different explosive quantities (0.025 kg–1.6 kg), stand-off distances (0.0 m–7.0 m), and detonation depths (0.25 m–2.0 m). The shock wave load and dynamic response of experiment models were measured by configuring sensors of pressure, acceleration, strain, and displacement. Then, the load distribution characteristics, time history of test data, and damage models related to present conditions were obtained and discussed. Three damage models, including bending failure, bending-shear failure and punching failure, were identified. In addition, the experience model of shock wave loads on the surface of a RC column was proposed for engineering application.     

Responses of HFR-LWC beams under close-range blast loadings accompanying membrane action

The load-carrying capacities and failure patterns of reinforced concrete components can be significantly changed by membrane effects. However, limited work has been carried out to investigate the blast resistance of Hybrid Fiber Reinforced Lightweight Aggregate Concrete (HFR-LWC) members accompanying membrane action. This paper presents a theoretical approach to quantitatively depicting the membrane behavior and its contribution on the behavior of HFR-LWC beams under close-range blast loadings, and the suitability of the proposed model is validated by a series of field tests. An improved Single-Degree-of-Freedom (SDOF) model was employed to describe the dynamic responses of beam-like members under blast loadings accompanying membrane action, where the mass-load coefficient is determined according to the nonuniformly distributed load induced by close-range explosion, and the membrane action is characterized by an in-plane (longitudinal) force and a resisting moment. The elasto-plastic and recovery responses of HFR-LWC beams under the combined action of blast load and membrane force were analyzed by the promoted model. A specially built end-constrain clamp was developed to provide membrane action for the beam member when they are subjected to blast load simultaneously. It is demonstrated that the analytical displacement-time histories are in good agreement with experimental results before peak deflections and that the improved SDOF model is an acceptable tool for predicting the behavior of HFR-LWC beams under blast loadings accompanying membrane action.     

地铁火灾应急预案的制定

介绍地铁火灾发生时的几个主要的特点以及其巨大的危害性,引出了地铁火灾应急预案制定模式的重要性。通过对已有的资料进行研究、分析,同时结合实际,对地铁火灾应急预案制定时所包含的主要内容进行了科学的完善,得出了一个完整的预案制定模式。     

基于马尔可夫更新过程的装甲装备使用可用度模型

针对在装甲装备使用可用度评估中,采用统计评估法存在统计周期长和不能用于研制阶段的缺点,利用马尔可夫更新过程,建立了考虑工作时间、修复性维修时间、延误时间和预防性维修时间的装甲装备的稳态可用度模型,并进行了示例应用。该模型可以在装备研制阶段,根据装备各项时间参数的分布,来估计装甲装备的使用可用度,可为装备设计、装备维修间隔期规划等提供理论和方法指导。     

Optimal control policies in service systems with limited information on the downstream stage

Existing models in multistage service systems assume full information on the state of downstream stages. In this paper, we investigate how much the lack of such information impacts jobs' waiting time in a two‐stage system with two types of jobs at the first stage. The goal is to find the optimal control policy for the server at the first stage to switch between type‐1 and type‐2 jobs, while minimizing the long‐run average number of jobs in the system. We identify control policies and corresponding conditions under which having no or partial information, the system can still capture the most benefit of having full information.     

基于可用度的电子设备告警系统检查策略研究

针对电子设备告警系统故障具有隐蔽性的特点,考虑检查不完善的因素,运用延迟时间概念,以系统期望可用度最大为优化目标,建立了电子设备隐蔽功能故障检查优化模型。提出了优化检查间隔期的算法,并通过实际案例验证了模型的有效性。     

基于粒子群算法的宽带真延时平面阵列方向图综合

针对大阵元间距平面阵列方向图综合问题,提出基于粒子群算法的宽带真延时平面阵列方向图综合方法。该方法根据真延时条件下阵列方向图主瓣和栅瓣指向的特点,采用宽带真延时抑制阵列方向图的栅瓣；利用粒子群优化算法优化阵列结构,得到具有较高主副瓣比的平面阵列方向图。通过对8×8的矩形平面阵进行仿真,验证了所提方法的有效性,在此基础上,还仿真研究了该方法对栅瓣的抑制性能与信号带宽之间的关系。     

某型自行火炮传动系统延迟时间维修建模实例研究

对某型自行火炮底盘传动系统维修保障现状和维修数据进行分析,引入延迟时间概念及其维修建模方法,建立延迟时间维修优化模型,提出主客观数据相结合的贝叶斯参数估计方法。考虑到设备的客观数据不足的情况,首先利用主观数据进行参数估计,在此基础上,再通过逐步完善的客观数据进行参数修正。最后,在一些满足实际情况的假定条件下,运用建立的延迟时间费用模型对检测周期进行了优化分析。     

DSP实现低信噪比条件下点目标检测与跟踪

针对嵌入式实时图像处理系统中 ,复杂背景低信噪比条件下红外运动点目标检测及跟踪所采用的处理算法 ,包括基于空域低通滤波的多图像平均法和自适应阈值分割法以及基于目标运动时空连续性目标运动轨迹拟合及目标运动轨迹参数预测算法 ,进行基于二维数组组合方式存储结构的算法复杂度估计 ,并将上述算法在TI公司的TMS32 0C6 2 0 1EVM板上进行实时性能评测 ,说明上述算法在基于具有软件流水性能的TMS32 0C6x系列DSP嵌入式实时图像处理系统中实现的可行性。