陆军航空兵直升机编制分形结构的验证与分析

从陆航直升机编制和陆航体系作战的实际需求出发,利用分形理论的信息维数定义,提出了定量验证陆航直升机编制分形结构的基本方法。以两个历史时期的美军陆航部队编制为例,建立了各型直升机分布的δ-覆盖,并分别测定了相应的信息维数,对比分析了两个历史时期美军陆航旅直升机编制的优劣。结果表明,利用信息维数可以定量说明陆航直升机编制的合理程度。     

强磁场环境模拟系统线圈支架设计及力学仿真

强电磁冲击环境的核心执行机构是线圈,除保障强磁环境发生线圈的电磁特性外,还须确保线圈支架具有充足的机械特性。在完成对线圈磁电设计的基础上,根据线圈的三维结构图、材料配置、质量分布、各零部件之间连接方式以及线圈固定方式等,建立线圈支架结构整体系统有限元计算模型,对线圈支架系统进行静力、稳定性数值计算分析,并校核联接件强度,为线圈支架结构提供参考依据。对实用大型强磁冲击系统所用线圈整体的力学结构进行设计分析,应用背景较新,且仿真计算过程严格按照实际搭建尺寸进行,具有高度的一致性,为后续搭建强磁环境发生装置提供坚实基础。     

不同裂解温度对制备SiCf/Si-O-C复合材料性能研究

以聚硅氧烷为先驱体,研究先驱体转化过程中在不同的裂解温度下对制备SiCf/Si-O-C复合材料性能影响.结果表明,当裂解温度在700℃、800℃时,陶瓷基复合材料的弯曲强度分别为255.2 MPa、309.0 MPa;当裂解温度在1000℃时,陶瓷基复合材料的弯曲强度为45.3 MPa.对SiCf/Si-O-C复合材料的微观结构及载荷-位移曲线进行分析,发现界面结构是影响SiCf/Si-O-C复合材料性能的主要因素.     

SiCw/Al复合材料的强度分析

用简化应力的分析方法推导了SiCw Al复合材料的强度与SiC晶须偏轴角α的关系,并通过试验进行验证.结果表明,计算的SiCw Al复合材料强度与实测值比较接近,其误差归因于压缩变形过程中SiC晶须发生了转动和折断,改变了SiC晶须的偏轴角和平均长径比.     

水下爆炸载荷作用下受损加肋圆柱壳的剩余屈曲强度计算

研究了在水下爆炸载荷作用下受损的加肋圆柱壳的屈曲.结合DYTRAN软件和NASTRAN软件计算了水下爆炸载荷作用下受损的加肋圆柱壳的剩余屈曲强度,并且提出了一种结合上述两种软件计算加肋圆柱壳的剩余屈曲强度的方法.数值计算表明,预测结果与实验结果吻合较好.     

The effect of al particle size on thermal decomposition,mechanical strength and sensitivity of Al/ZrH2/PTFE composite

To study the thermal decomposition of Al/ZrH2/PTFE with different Al particle size as well as mechanical strength and impact sensitivity under medium and low strain rates, molding-vacuum sintering was adopted to prepare four groups of power materials and cylindrical specimens with different Al particle size. The active decomposition temperature of ZrH2 was obtained by TG-DSC, and the quasi-static me-chanics/reaction characteristics as well as the impact sensitivity of the specimen were studied respec-tively by quasi-static compression and drop-hammer test. The results show that the yield strength of the material decreased with the increase of the Al particle size, while the compressive strength, failure strain and toughness increased first and then decreased, which reached the maximum values of 116.61 MPa, 191％, and 119.9 MJ/m respectively when the Al particle size is 12—14μm because of particle size grading. The specimens with the highest strength and toughness formed circumferential open cracks and reacted partly when pressed. Those with developmental cracks formed inside did not react. It is considered that fracture of specimens first triggered initial reaction between Al and PTFE to release an amount of heat. Then ZrH2 was activated and decomposed, and participated in subsequent reaction to generate ZrC. The impact sensitivity of the specimens decreased with the increase of Al particle size.     

螺旋齿轮齿面接触应力理论计算

应用赫兹理论和齿轮啮合理论给出了螺旋齿轮齿面接触应力的计算方法和相关公式 .算例的计算结果表明螺旋齿轮齿面接触应力明显大于相近参数的圆柱斜齿轮 ,这是此类齿轮用于主传动时普遍出现齿面磨损的一个重要原因 ,因此在设计确定齿轮参数时必须校核接触应力 .     

超声波法检测火灾高温后钢筋混凝土强度

我国每年有大量钢筋混凝土结构的建筑过火,科学准确的评估火灾高温后构件和结构的残存强度,据此制定科学合理的修复加固方案对于减少火灾损失具有重要意义。简略介绍了国内外火灾高温后钢筋混凝土结构受损评估的方法,并以某工程火灾后的强度检测为实例,提出了用超声波法检测火灾高温后钢筋混凝土残存强度的可行性和检测时应注意的问题,根据对多起建筑火灾高温后钢筋混凝土构件检测波形的对比,提出了不同受损程度的钢筋混凝土构件所表现的不同特征的波形。     

Development of proxy relationships: a case study of the Lebanese Civil War

Proxy warfare is a consistent element in international warfare. However, it is unclear why proxy relationships form in cases where states have multiple options of groups to support. Existing research identifies the presence of transnational constituencies, shared interstate rivalries, and moderate relative strength of militant groups as highly influential on the development of a proxy relationship. This study examines the presence of these variables within the context of the Lebanese Civil War. The results of this demonstrate that each state places greater importance on some variables and ignores others when choosing a proxy. Additionally, this study further demonstrates the presence of new variables that are key to the development of proxy relationships.     

大口径穿甲弹用材料应用研究动态及分析

为了提高穿甲弹的威力,有效对抗新型防护装甲和防护技术,对现有提高大口径穿甲弹穿甲威力的技术途径进行了分析,得出了弹芯材料和弹托材料的力学性能是制约穿甲威力提高的关键因素。详细阐述了目前国内外在大口径穿甲弹用弹芯材料的强韧化、绝热剪切敏感性,新型复合材料弹芯的研究和轻质弹托材料的应用研究动态,并对研究中存在的问题进行了分析。最后,对我国大口径穿甲弹用材料的研究工作进行了展望。