基于自适应变异粒子群算法的火力分配方法研究

针对最优火力分配的特点,分析了火力分配优化问题的数学模型,设计了一种求解该类问题的自适应变异粒子群算法（Adaptive Mutation Particle Swarm Optimization, AMPSO）。该算法采用十进制编码方法和基于数值运算的个体更新方法;为平衡算法的局部搜索能力和全局收敛性能,设计了一种关键参数自适应调整方法;为增强种群在进化后期的多样性,提出了一种变异策略。仿真结果表明,所提AMPSO算法具有良好的寻优性能,是优化火力分配的一种有效算法。     

多目标多火力通道云调度策略研究

在水面舰艇面对多目标饱和攻击时,对多火力通道的最佳调度是水面舰艇自防御武器系统火力分配的关键问题。本文采用云模型方法将多目标威胁判断与反导武器系统多火力通道状态相匹配,通过实时评估目标威胁等级、武器系统抗击时间和最佳抗击距离等因素,提出一种兼顾目标和火力通道实时状态的新调度策略——云调度策略,有效降低舰艇损伤程度,提高反导武器系统抗击效率和抗击质量。仿真证明,此策略可提高整体反导防御效能。     

A critical look at the U.S. deceased‐donor organ procurement and utilization system

The U.S. system for procuring and utilizing deceased‐donor organs for transplantation has been studied and written about in many articles. The purpose of this paper is to examine the interactions between the elements that comprise this system, and point out improvement opportunities that may be affected through operations research/management techniques. The authors demonstrate the need for developing data‐driven and analytic tools. In fact, data is used to generate hypotheses and support claims throughout the paper. The paper also points out the need to fully leverage data that is available to researchers, and to seek data that is currently not deposited in a centralized archive.     

激光辐照下45#钢板响应特性

采取实验和数值模拟相结合的方法对激光辐照45#钢板的响应特性进行研究。基于连续光纤激光发射系统,开展钢板的激光辐照实验,得到温度场分布及靶板的烧蚀穿孔特性;基于ANSYS建立靶板有限元模型,模拟激光辐照下靶板的热响应过程,得到了靶板厚度、激光功率和光斑直径等因素对靶板温度分布及靶板穿孔特性的影响规律。     

"M/M/1"在单火力单元射击多目标火力分配中的应用

在单服务台排队系统理论的基础上,建立了单火力单元对多个目标射击的系统仿真模型,对此模型进行了分析,给出了模型的适用范围,并通过在计算机上仿真运行实例,验证了该仿真模型的正确性.该方法是一种有益的尝试与探索,对局部作战指挥决策有一定的参考价值.     

聚碳硅烷的高温高压合成与减压蒸馏

采用高温高压法合成了聚碳硅烷(PCS),通过改变合成条件与减压蒸馏温度的方法对PCS分子量及其分布进行调控。研究表明,改变PCS的反应温度、反应时间,可以基本控制PCS的分子量及其分布范围。随着反应温度的提高,反应时间的延长,PCS的分子量逐渐增大,分子量分布变宽。当合成温度高于450℃,反应时间大于6h时,或温度高于460℃,反应时间大于4h时,PCS中出现高分子量部分。随着反应条件的强化,高分子量部分逐渐增加,甚至出现超高分子量部分。提高减压蒸馏温度,可以有效降低PCS的低分子含量,提高分子量,降低分散系数。减压蒸馏温度每提高50℃,PCS的低分子含量约降低8%,重均分子量约提高1000,分散系数平均降低约0.3。     

弹炮结合防空武器系统火力分配模型

火力分配是弹炮结合武器系统射击指挥中的重要环节。论文针对弹炮结合武器系统中防空导弹分系统和高炮分系统战术技术性能与作战特点,在具体分析火力分配考虑的主要因素——防空导弹分系统和高炮分系统的杀伤区与毁伤概率的基础上,确立了相应的火力优化分配原则,构建了实用的临近航路和过航点处火力分配模型,通过仿真表明该模型实时性好,能满足实际应用需要,对进一步研究提供了有益的参考。     

Experimental investigation on dynamic response and damage models of circular RC columns subjected to underwater explosions

Reinforced concrete (RC) columns are widely used as supporting structures for high-piled wharfs. The study of damage model of a RC column due to underwater explosion is a critical issue to assess the wharf’s antiknock security. In this study, the dynamic response and damage model of circular RC columns subjected to underwater explosions were investigated by means of scaled-down experiment models. Experiments were carried out in a 10.0 m diameter tank with the water depth of 2.25 m, under different explosive quantities (0.025 kg–1.6 kg), stand-off distances (0.0 m–7.0 m), and detonation depths (0.25 m–2.0 m). The shock wave load and dynamic response of experiment models were measured by configuring sensors of pressure, acceleration, strain, and displacement. Then, the load distribution characteristics, time history of test data, and damage models related to present conditions were obtained and discussed. Three damage models, including bending failure, bending-shear failure and punching failure, were identified. In addition, the experience model of shock wave loads on the surface of a RC column was proposed for engineering application.     

Investigation on the spatial distribution characteristics of behind-armor debris formed by the perforation of EFP through steel target

The behind-armor debris (BAD) formed by the perforation of an EFP is the main damage factor for the secondary destruction to the behind-armor components. Aiming at investigating the BAD caused by EFP, flash X-ray radiography combined with an experimental witness plate test method was used, and the FEM-SPH adaptive conversion algorithm in LS-DYNA software was employed to model the perforation process. The simulation results of the debris cloud shape and number of debris were in good agreement with the flash X-ray radiographs and perforated holes on the witness plate, respectively. Three-dimensional numerical simulations of EFP's penetration under various impact conditions were conducted. The results show that, an ellipsoidal debris cloud, with the major-to-minor axis radio (a/b) smaller than that caused by shaped charge jets, was formed behind the target. With the increase of target thickness (h) and decrease of impact velocity (v₀) and obliquity (θ), the value of a/b decreases. The number of debris ejected from target is significantly higher than that from EFP. Based on the statistical analysis of the spatial distribution of the BAD, An engineering calculation model was established considering the influence of h, v₀ and θ. The model can with reasonable accuracy predict the quantity and velocity distribution characteristics of BAD formed by EFP.     

Effect of tool rotational speed on the particle distribution in friction stir welding of AA6092/17.5 SiCp-T6 composite plates and its consequences on the mechanical property of the joint

This study investigates the effect of tool rotational speed (TRS) on particle distribution in nugget zone (NZ) through quantitative approach and its consequences on the mechanical property of friction stir welded joints of AA6092/17.5 SiC_p-T6 composite. 6 mm thick plates are welded at a constant tool tilt angle of 2° and tool traverse speed of 1 mm/s by varying the TRS at 1000 rpm, 1500 rpm and 2000 rpm with a taper pin profiled tool. Microstructure analysis shows large quantity of uniformly shaped smaller size SiC particle with lower average particle area which are homogeneously distributed in the NZ. The fragmentation of bigger size particles has been observed because of abrading action of the hard tool and resulting shearing effect and severe stress generation due to the rotation of tool. The particles occupy maximum area in the matrix compared to that of the base material (BM) due to the redistribution of broken particles as an effect of TRS. The migration of particles towards the TMAZ-NZ transition zone has been also encountered at higher TRS (2000 rpm). The microhardness analysis depicts variation in average hardness from top to bottom of the NZ, minimum for 1500 rpm and maximum for 2000 rpm. The impact strength at 1000 rpm and 1500 rpm remains close to that of BM (21.6 J) while 2000 rpm shows the accountable reduction. The maximum joint efficiency has been achieved at 1500 rpm (84%) and minimum at 1000 rpm (68%) under tensile loading. Fractographic analysis shows mixed mode of failure for BM, 1000 rpm and 1500 rpm, whereas 2000 rpm shows the brittle mode of failure.