基于随机森林的重要性测度指标体系

重要性测度分析可以找出重要特征变量,从而降低输入空间的维数,节约运算成本。基于随机森林重要性测度的分析原理,探寻随机森林的重要性测度指标与基于方差的全局灵敏度指标之间的联系,得到求解方差灵敏度主指标S_i及其总指标S_i~T的新途径。建立基于随机森林的单变量、组变量重要性测度指标,并明确具体的求解过程,完善基于随机森林的重要性测度指标体系。通过算例验证了所提基于随机森林的重要性测度指标体系的有效性及其与方差灵敏度指标之间关系的正确性。     

Research on design and firing performance of Si-based detonator

For the chip integration of MEMS (micro-electromechanical system) safety and arming device, a miniature detonator needs to be developed to reduce the weight and volume of explosive train. A Si-based micro-detonator is designed and fabricated, which meets the requirement of MEMS safety and arming device. The firing sensitivity of micro-detonator is tested according to GJB/z377A-94 sensitivity test methods: Langlie. The function time of micro-detonator is measured using wire probe and photoelectric transducer. The result shows the average firing voltage is 6.4 V when the discharge capacitance of firing electro-circuit is 33 μF. And the average function time is 5.48 μs. The firing energy actually utilized by Si-based micro-detonator is explored.     

参数化建模的螺栓法兰连接刚度分析

为分析几何参数对螺栓法兰连接刚度的影响,用MSC.Patran软件的二次开发工具PCL(Patran Command Language)建立了螺栓法兰连接的参数化模型。研究了螺栓法兰连接刚度随连接结构几何参数的变化规律并进行了灵敏度分析。经分析可知,连接结构刚度对开孔位置比例参数最敏感,其次是上法兰厚度。当上部段长度大于某一数值时,连接结构刚度对上部段长度参数不敏感,这一结论能为连接结构动力学简化建模提供一定理论参考。     

晶体管自差收发机优化设计的数学模型

依据自差收发机灵敏度的计算公式,在满足技术要求所规定的辐射功率和电源噪声传输系数条件下,把自差收发机的灵敏度作为目标函数,对自差收发机的电路参数作为设计变量,对自差收发机进行了优化设计,得出自差机优化设计的数学模型。     

应变率和绝热软化对空腔膨胀影响的数值模拟

采用数值模拟的方法研究金属材料球形空腔膨胀的空腔面径向应力与膨胀速度关系.理想弹塑性模型和幂次硬化模型的模拟结果与理论解吻合得非常好,验证了该方法的有效性.在此基础上研究了应变率和绝热软化效应对空腔面径向力和膨胀速度的影响.结果表明,综合考虑应变率和热效应的侵深预测结果与试验值吻合得很好,只考虑应变率而不计热效应会高估...     

基于Nastran优化的某导弹结构模型修正

为了对某型号导弹结构建立合理的有限元全弹模型,基于Nastran的灵敏度分析及优化功能,首先对初始导弹模型设计参数进行了灵敏度分析,并确定优化设计的设计变量,然后以模态试验结果为优化目标,对其进行动力学优化,得到修正模型.结果表明,修正后模型的计算结果与试验结果偏差有很大程度的改进,符合了工程的使用需要.     

Preparation and property of CL-20/BAMO-THF energetic nanocomposites

A sol-gel freezing-drying method was utilized to prepare energetic nanocomposites based on 2, 4, 6, 8, 10, 12-hexanitro-2, 4, 6, 8, 10, 12-hexaazaisowurtzitane (CL-20) with 3, 3-Bis (azidomethyl) oxetane-tetrahydrofuran copolymer (BAMO-THF) as energetic gel matrix. Scanning electron microscopy (SEM), X-ray diffraction (XRD), Raman, Fourier-transform infrared spectroscopy (FT-IR) and differential thermal analyser (DTA) were utilized to characterize the structure and property of the resultant energetic nanocomposites. Compared with raw CL-20, the average particle sizes of CL-20 in CL-20/BAMO-THF energetic nanocomposites were decreased to nano scale and the morphologies of CL-20 were also changed from prismatic to spherical. FT-IR detection revealed that CL-20 particles were recrystallized in BAMO-THF gel matrix during the freezing-drying process. The thermal decomposition behaviors of the energetic nanocomposites were investigated as well. The thermolysis process of CL-20/BAMO-THF nanocomposites was enhanced and the activation energy was lower compared with that of raw CL-20, indicating that CL-20/BAMO-THF nanocomposites showed high thermolysis activity. The impact sensitivity tests indicated that CL-20/BAMO-THF energetic nanocomposites presented low sensitivity performance.     

ATIE:一种自适应的可调域间出口选择算法

TIE算法能对域间出口的选择进行调节,但是该算法的参数计算过于复杂,并且出口选择的调节并不能随负载的变化而变化,因此提出了一种自适应的可调域间出口选择算法ATIE,该算法能够满足流量工程和网络健壮性要求,并通过参数T的改变随当前负载的变化而变化.实验表明,ATIE算法能够在控制剖面敏感性和随负载变化的流量工程自适应性上达到合理的折衷.     

零压式高空气球球形设计与参数敏感性分析

高空气球能够为临近空间科学实验提供可靠的平台，其形状直接关系到气球制作及飞行的全过程。提出将多段打靶法与序列二次规划法结合，对零压气球完全膨胀和部分膨胀状态下的球形进行求解，并运用有限元方法对球形进行稳定性及应力应变分析，验证了所推导球形的正确性。在此基础上，对影响气球形状的关键参数进行灵敏度分析及相关运用，从定量的角度得到气球载荷、飞行高度及昼夜温差对气球形状的影响规律。     

光电稳定机构指向误差建模与敏感度分析

光电稳定机构在武器装备的侦察、瞄准设备中应用广泛,其光轴指向误差直接影响着目标探测、识别的准确性.在加工和装配过程中难以避免的机构几何误差是指向误差的重要来源.基于多体系统运动学理论的误差建模方法,以两轴式稳定机构为例,建立了基于几何误差的指向误差模型.并通过误差模型的概率分析和误差敏感度的构建,比较了各项几何误差的影响程度.此方法既可在设计阶段用于指向误差的评估和几何误差的分配,也可在调试阶段用于几何误差标定.