液氧与气氧对空气加热器燃烧流场的影响分析

针对一种基于液体火箭发动机燃烧室结构的空气加热器,采用数值仿真技术研究了加热器内部喷雾燃烧、燃气掺混以及出口流场分布等参数.分析对比了采用酒精/液氧/空气与酒精/气氧/空气两种不同氧化剂物态三组元同轴直流式喷嘴所得到的燃烧流场的区别,并通过改变燃烧室特征长度,分析了两种计算工况的加热器的性能差异.结果表明,喷入氧化剂的物态对燃烧流场影响较大,采用液氧喷嘴的火焰较长,气氧喷嘴的火焰分布较宽,且相对于液氧喷嘴,气氧喷嘴的燃烧室前端回流区由于掺混较多的燃气,导致喷注面板附近燃气温度较高,面板承热压力较大.设计的加热器均可保证两种喷嘴的出口流场品质较高,在保证流场出口品质的原则上,气氧喷嘴的燃烧室特征长度可至少小于液氧喷嘴的1/4.     

飞机机翼结构损伤仿真研究

飞机结构的战伤模式及战伤程度预测对于制定战场抢修预案及改进战斗生存力设计具有重要意义。采用计算机模拟仿真技术定量分析了飞机机翼结构遭受射弹攻击后的损伤情况。通过损伤仿真讨论了3类情形,一是机翼结构受到简单的侵彻后的冲击效应;二是高速射弹攻击带有翼盒的机翼,而产生流体动力冲压效应;三是在射弹冲击模型中增加爆炸条件,研究射弹以任意角度冲击不同的位置产生的耦合效应。基于AN SY S/LS-DYNA仿真,给出了机翼结构损伤的结果,结论为战伤飞机战场抢修的快速评估提供了科学依据,也为飞机平时修理提供了参考。     

位置修正技术在航位推算中的应用

利用图解法证明了航位推算轨迹和真实轨迹相似,符合相似性原理,并通过图解法推导位置修正公式;将位置修正技术用于里程仪的初始标定,经实测数据证明标定后的航向安装偏差角、俯仰安装偏差角及里程仪刻度系数误差大幅减小;将位置修正技术与GPS结合进行GPS/DR组合导航,经Matlab仿真证明该组合导航在长距离行车可将航向误差角限制在3.6′之内;该修正技术具有较高的实际应用价值。     

水下航行器头部流噪声数值仿真与实验

选取头部线型,对航行器头部基于RNG k-ε湍流模型及FW-H声学模型进行流噪声模拟,然后对3种头部线型的航行器在不同速度下分别进行水洞实验。通过对比分析数值仿真与实验结果发现,航行器头部流噪声随着频率的增大而逐渐减小,随着速度的增大而增大。在相同速度下,与头部线型2、头部线型3相比,头部线型1流噪声较小,具有更好的降噪作用。所采用的计算方法可以比较准确地模拟航行器头部流噪声情况。     

A partial characterization of the optimal ordering/rationing policy for a periodic review system with two demand classes and backordering

We consider a finite horizon periodic review, single product inventory system with a fixed setup cost and two stochastic demand classes that differ in their backordering costs. In each period, one must decide whether and how much to order, and how much demand of the lower class should be satisfied. We show that the optimal ordering policy can be characterized as a state dependent (s,S) policy, and the rationing structure is partially obtained based on the subconvexity of the cost function. We then propose a simple heuristic rationing policy, which is easy to implement and close to optimal for intensive numerical examples. We further study the case when the first demand class is deterministic and must be satisfied immediately. We show the optimality of the state dependent (s,S) ordering policy, and obtain additional rationing structural properties. Based on these properties, the optimal ordering and rationing policy for any state can be generated by finding the optimal policy of only a finite set of states, and for each state in this set, the optimal policy is obtained simply by choosing a policy from at most two alternatives. An efficient algorithm is then proposed. © 2010 Wiley Periodicals, Inc. Naval Research Logistics, 2010     

一种运用遗传算法确定船舶航向控制模糊规则的方法

为了克服船舶航向控制模糊规则确定过程中的盲目性,引入一种与之相适应的遗传算法,以使结果成为某种意义下的最优解,从而从根本上解决这一重要问题.文中运用Matlab的C语言MEX-文件技术,将遗传算法源代码与Matlab直接结合起来,利用后者的强大建模能力,建立起完整的仿真模型.仿真结果表明,船舶的航向控制能力得到明显改善.     

0.18 μm CMOS工艺的GPS/BDS双模可重构接收机射频前端

采用低中频架构设计了一种0.18μm CMOS工艺的GPS/BDS双模可重构接收机射频前端,能在GPS L1模式或BDS B1模式下工作。通过频率自适应电路调整中频滤波器的时间常数,降低其频率不确定度;压控振荡器中加入4位开关电容阵列,以提高频率调谐范围和相位噪声性能;通过硬件复用的方式降低系统功耗。测试结果表明,在1.8 V电源电压下,功耗37.8 m W,电压增益为103 d B,GPS L1和BDS B1波段噪声系数均小于3.2 d B。     

FIPA规范的防空导弹体系Agent建模方法

针对防空导弹体系建模的复杂性,探讨研究防空导弹体系的Agent建模方法.提出了基于G/A矩阵的Agent建模方法步骤,通过分析角色之间的关系描述了Agent组织结构,给出了角色类和Agent类的统一定义,并建立了Agent结构框架和类实现模型,最后构建了基于FIPA规范的MAS综合集成框架.该方法的提出,为防空导弹体系的进一步建模提供了方法依据.     

Value management of diagnostic equipment with cancelation,no‐show,and emergency patients

Magnetic resonance imaging and other multifunctional diagnostic facilities, which are considered as scarce resources of hospitals, typically provide services to patients with different medical needs. This article examines the admission policies during the appointment management of such facilities. We consider two categories of patients: regular patients who are scheduled in advance through an appointment system and emergency patients with randomly generated demands during the workday that must be served as soon as possible. According to the actual medical needs of patients, regular patients are segmented into multiple classes with different cancelation rates, no‐show probabilities, unit value contributions, and average service times. Management makes admission decisions on whether or not to accept a service request from a regular patient during the booking horizon to improve the overall value that could be generated during the workday. The decisions should be made by considering the cancelation and no‐show behavior of booked patients as well as the emergency patients that would have to be served because any overtime service would lead to higher costs. We studied the optimal admission decision using a continuous‐time discrete‐state dynamic programming model. Identifying an optimal policy for this discrete model is analytically intractable and numerically inefficient because the state is multidimensional and infinite. We propose to study a deterministic counterpart of the problem (i.e., the fluid control problem) and to develop a time‐based fluid policy that is shown to be asymptotically optimal for large‐scale problems. Furthermore, we propose to adopt a mixed fluid policy that is developed based on the information obtained from the fluid control problem. Numerical experiments demonstrate that this improved policy works effectively for small‐scale problems. © 2016 Wiley Periodicals, Inc. Naval Research Logistics 63: 287–304, 2016     

基于DSP+FPGA的导航计算机数据采集与处理硬件设计

根据捷联惯导系统中数据采集和运算处理的要求,提出了以高性能DSP为核心,由FPGA构成主要外部输入输出接口的导航计算机硬件设计方案;设计了I/F转换电路;给出了各电路的硬件结构框图和各器件的特性、选择与应用。从硬件方面分别讲述了FPGA和DSP的工作过程和功能。利用本方案,对实现军事和工程领域中导航系统微小型化、降低系统成本和体积具有重要意义。