SiC纤维表面CVD SiC涂层对其单丝强度的影响

采用化学气相沉积(CVD, Chemical Vapor Deposition)工艺在KD-I型SiC纤维表面制备了SiC涂层,选择2h、4h、6h和8h四个时间点研究了沉积时间对纤维性能的影响.结果表明:具有CVD SiC涂层的SiC纤维较无涂层的纤维来说强度有所下降;在所研究的沉积时间范围内,随着沉积时间的增加,涂层的厚度有所增加,涂层由不连续的岛状转变为连续层状,纤维的单丝强度出现了先升后降的趋势.     

碳纤维/双马来酰亚胺复合材料修复性能

为了得到碳纤维/双马来酰亚胺复合材料最佳修复效果,采用碳纤维/环氧复合材料和环氧胶膜作为修复材料,对带Φ15 mm和Φ5 mm预制孔碳纤维/双马来酰亚胺复合材料进行单面贴补、双面贴补和单面阶梯挖补修复。研究了补片长度、厚度和铺层顺序对修复效果的影响,并结合修复试样的拉伸断裂模式,优化了修复参数。结果表明:补片边缘母板中存在的应力集中和厚度方向拉伸应力是导致母板断裂的关键原因;双面贴补修复试样拉伸强度能恢复到完好试样的90%以上,单面贴补和阶梯挖补修复试样拉伸强度能恢复到完好试样的80%以上。     

石英/双酚E型氰酸酯复合材料的制备与性能

采用实验方法研究双酚E型氰酸酯树脂的黏度和固化特性,揭示催化剂对双酚E型氰酸酯树脂固化特性的影响规律;采用树脂传递模塑和真空导入模塑工艺制备石英纤维/双酚E型氰酸酯复合材料,并考察其力学性能。结果表明,双酚E型氰酸酯树脂室温至90℃范围内的黏度小于300 m Pa·s,凝胶时间大于10 h,起始固化温度、固化温度和终止固化温度分别为186±5℃,235±5℃和286±5℃;固化特征温度随着催化剂含量的增加而降低,直至催化剂饱和,其饱和范围为0.02%~0.03%,可使双酚E型氰酸酯树脂体系的固化温度降低约60℃,从而避免爆聚,实现液相法成型其复合材料;真空导入模塑工艺制备的石英纤维/双酚E型氰酸酯复合材料的力学性能明显优于树脂传递模塑制备试样。     

The effects of model parameter deviations on the variance of a linearly filtered time series

We consider a general linear filtering operation on an autoregressive moving average (ARMA) time series. The variance of the filter output, which is an important quantity in many applications, is not known with certainty because it depends on the true ARMA parameters. We derive an expression for the sensitivity (i.e., the partial derivative) of the output variance with respect to deviations in the model parameters. The results provide insight into the robustness of many common statistical methods that are based on linear filtering and also yield approximate confidence intervals for the output variance. We discuss applications to time series forecasting, statistical process control, and automatic feedback control of industrial processes. © 2010 Wiley Periodicals, Inc. Naval Research Logistics, 2010     

The building evacuation problem with shared information

In this article, the Building Evacuation Problem with Shared Information (BEPSI) is formulated as a mixed integer linear program, where the objective is to determine the set of routes along which to send evacuees (supply) from multiple locations throughout a building (sources) to the exits (sinks) such that the total time until all evacuees reach the exits is minimized. The formulation explicitly incorporates the constraints of shared information in providing online instructions to evacuees, ensuring that evacuees departing from an intermediate or source location at a mutual point in time receive common instructions. Arc travel time and capacity, as well as supply at the nodes, are permitted to vary with time and capacity is assumed to be recaptured over time. The BEPSI is shown to be NP‐hard. An exact technique based on Benders decomposition is proposed for its solution. Computational results from numerical experiments on a real‐world network representing a four‐story building are given. Results of experiments employing Benders cuts generated in solving a given problem instance as initial cuts in addressing an updated problem instance are also provided. © 2008 Wiley Periodicals, Inc. Naval Research Logistics, 2008     

增强材料芳纶纤维在减振降噪橡胶制品中的应用

论述了橡胶制品用骨架材料芳纶纤维的发展、结构及其性能,并结合橡胶减振消声制品的发展,阐述了芳纶纤维在该类产品中的潜在应用前景.     

坦克装甲车辆火控技术的现状及发展

对坦克火控系统的技术现状和发展前景进行了较为详尽的论述,并指出了当前国内火控发展中面临的主要技术难题及解决办法.     

Fabrication of AA7005/TiB2-B4C surface composite by friction stir processing: Evaluation of ballistic behaviour

The present work aims to enhance the ballistic resistance of AA7005 alloy by incorporating the TiB₂ and B₄C ceramic reinforcement particles. Surface composites with different weight fractions of TiB₂ and B₄C particles were processed by friction stir processing. Micro-hardness and depth of penetration tests were carried out to evaluate the ballistic properties of the surface composites. The surface hardness of the composite was found to be nearly 70 HV higher than base alloy. The depth of penetration of the steel projectile was 20–26 mm in the composites as compared to 37 mm in the base alloy. Ballistic mass efficiency factor of the surface composite was found to be 1.6 times higher than base alloy. This is mainly attributed to the dispersion strengthening from the reinforcement particles.     

TiO_2/ACF复合光催化材料的制备及性能

用适宜载体将粉体材料固定是提高光催化材料稳定性的关键。采用溶胶-凝胶法,以钛酸丁酯为原料,选取活性炭纤维(ACF)为载体,制备了TiO2/ACF复合光催化材料。利用X射线衍射仪(XRD)、热分析仪(DSC-TG)和扫描电子显微镜(SEM)等测试技术对复合光催化材料的结构进行了表征分析。在紫外光照射下,通过对甲醛气体的光催化降解,考察了煅烧温度、煅烧时间、负载次数和负载时间等不同制备条件对复合光催化材料结构和性能的影响,结果表明:当煅烧温度为400℃,煅烧时间为2h,负载3次,负载时间为6min制备的TiO2/ACF光催化性能最佳。     

碳纤维混凝土抗冻性能试验研究

为了增强高昼夜温差地区营房屋面和墙体的抗裂性能,提高营房安全性、舒适性及使用寿命,利用快速冻融法对碳纤维混凝土进行了300次冻融循环试验,并测量其相对动弹性模量和质量损失情况。结果显示:普通混凝土在150次冻融循环试验后试件破坏严重,平均质量损失了0.695 kg,损失率为6.9%;碳纤维混凝土在300次冻融循环试验后外形仍保持较好的完整性,平均质量损失了0.514 kg,损失率为5.19%,相对动弹性模量最多下降了34%,其中体积分数为1%的碳纤维混凝土平均质量损失仅为0.398 kg,损失率为4.05%,相对动弹性模量下降了31%。试验表明碳纤维可以改善混凝土的抗冻性能,适用于高昼夜温差地区建筑。