脉冲等离子体推力器羽流的粒子模拟

目前微小卫星正在积极地发展中,脉冲等离子体推力器是其推进系统的一个重要发展方向,为了能够将PPT成功地运用于空间,需对其羽流进行研究.将DSMC(Direct Simulation Monte-Carlo)/PIC(Particle in Cell)流体混合算法与一维MHD放电模型相结合,一体化模拟NASA Glenn PPT羽流,对不同出口偏转角的羽流场进行模拟,并与实验结果进行了比较.计算结果显示引入出口速度的偏转角提高了模型的羽流扩散能力,羽流的扩散角是影响羽流的一个主要因素.     

班主任应具备的基本素质和工作方法

班主任工作的好坏,直接影响着学校整体学生管理工作。提高班主任素质,不断探索班主任工作的新途径、新方法,才能实现班主任工作的新突破,开创班主任工作的新局面。     

The effects of model parameter deviations on the variance of a linearly filtered time series

We consider a general linear filtering operation on an autoregressive moving average (ARMA) time series. The variance of the filter output, which is an important quantity in many applications, is not known with certainty because it depends on the true ARMA parameters. We derive an expression for the sensitivity (i.e., the partial derivative) of the output variance with respect to deviations in the model parameters. The results provide insight into the robustness of many common statistical methods that are based on linear filtering and also yield approximate confidence intervals for the output variance. We discuss applications to time series forecasting, statistical process control, and automatic feedback control of industrial processes. © 2010 Wiley Periodicals, Inc. Naval Research Logistics, 2010     

一种时频混叠的欠定混合通信信号盲分离算法

针对衰减-延迟欠定混合通信信号的盲分离问题,提出了一种基于子空间最小距离的源信号估计算法,通过计算观测信号到混合矩阵列矢量张成子空间的距离,估计任意时频点同时存在的源信号数目以及当前源信号对应的混合矩阵列矢量,把欠定混合问题转化为超定问题,然后通过计算Moore-Penrose逆矩阵求解源信号,理论分析和仿真结果验证了算法的有效性。     

The building evacuation problem with shared information

In this article, the Building Evacuation Problem with Shared Information (BEPSI) is formulated as a mixed integer linear program, where the objective is to determine the set of routes along which to send evacuees (supply) from multiple locations throughout a building (sources) to the exits (sinks) such that the total time until all evacuees reach the exits is minimized. The formulation explicitly incorporates the constraints of shared information in providing online instructions to evacuees, ensuring that evacuees departing from an intermediate or source location at a mutual point in time receive common instructions. Arc travel time and capacity, as well as supply at the nodes, are permitted to vary with time and capacity is assumed to be recaptured over time. The BEPSI is shown to be NP‐hard. An exact technique based on Benders decomposition is proposed for its solution. Computational results from numerical experiments on a real‐world network representing a four‐story building are given. Results of experiments employing Benders cuts generated in solving a given problem instance as initial cuts in addressing an updated problem instance are also provided. © 2008 Wiley Periodicals, Inc. Naval Research Logistics, 2008     

考虑扩散效应圆形隧洞热弹性耦合动力响应研究

利用S-H热弹性扩散的基本理论,研究了无限弹性介质中圆形隧洞表面受随时间变化的热冲击的动力响应问题.采用直接求解方法以避免势函数的引入,利用Laplace变换技术,求解热、力、化学耦合控制方程,获得了弹性介质中温度梯度、位移、应力和化学势的积分形式解.最后,利用Laplace逆变换得到数值结果,分析了热、力、化学耦合条件下弹性介质中温度梯度、应力、位移和化学势响应的分布规律.     

Effect of wave shaper on reactive materials jet formation and its penetration performance

Wave shaper effect on formation behavior and penetration performance of reactive liner shaped charge (RLSC) are investigated by experiments and simulations. The reactive materials liner with a density of 2.3 g/cm³ is fabricated by cold pressing at a pressure of 300 MPa and sintering at a temperature of 380 °C. Experiments of the RLSC with and without wave shaper against steel plates are carried out at standoffs of 0.5, 1.0, and 1.5 CD (charge diameter), respectively. The experimental results show that the penetration depths and structural damage effects of steel plates decrease with increasing the standoff, while the penetration depths and the damage effects of RLSC without wave shaper are much greater than that with wave shaper at the same standoff. To understand the unusual experimental results, numerical simulations based on AUTODYN-2D code are conducted to discuss the wave shaper effect, including the propagation behavior of detonation wave, the velocity and temperature distribution of reactive jet, and penetration depth of reactive jet. The simulations indicate that, compared with RLSC without wave shaper, there is a higher temperature produced inside reactive jet with wave shaper. This unusual temperature rise effects are likely to be an important mechanism to cause the initiation delay time of reactive jet to decline, which results in significantly decreasing its penetration performance.     

高超声速飞行器新息滤波交互式多模型跟踪算法

研究临近空间高超声速飞行器在运动特点,针对强杂波环境下高速、高机动目标跟踪问题,提出用新息滤波减小观测噪声以修正模型概率更新过程的算法。Monte-Carlo仿真结果表明:该算法可以有效减小量测噪声对系统滤波的影响,提高滤波精度,在临近空间强杂波环境下具有较好的跟踪精度,具有一定工程实用价值。     

超音速子母弹时序抛撒分离干扰特性

为分析在时序抛撒方式下子母弹多体干扰流场特性及其对各舱段弹体气动特性的影响,基于流体控制方程与六自由度刚体运动方程,结合非结构动网格技术,分别对两种时序抛撒方式及后舱子弹单独抛撒方式下的子母弹三维非定常分离流场进行数值模拟,得到不同抛撒时序下的分离流场特性及其气动干扰特性,揭示各舱段子弹在不同分离阶段的气动干扰相互作用过程。研究结果表明:在时序抛撒分离过程中各弹体间激波不断地交错干扰,增加了流场结构的复杂性;前舱子弹的激波干扰使得后舱段子弹气动分离参数较低,分离效率较慢,尤其在短时序间隔下,后舱弹体受前舱子弹干扰较为严重,弹体的安全分离受到影响。     

分布式间歇干扰下基于SMI的GNSS空时自适应处理器性能分析

针对全球导航卫星系统接收机面临的分布式间歇干扰威胁,全面准确地分析了基于采样矩阵直接求逆方法的空时自适应处理(space-time adaptive processing, STAP)的抗干扰性能。在建立性能分析模型的基础上,根据间歇干扰造成的采样协方差矩阵不匹配情况,通过分类评估、梳理归纳、理论推导全面分析了不同情况下STAP的性能。分析结果表明在采样长度小于闪烁周期且使用预采用处理方法时,空时自适应处理器会出现漏采样,干扰抑制性能会急剧下降,漏采样出现的频率为各干扰闪烁频率之和。数值和仿真分析验证了理论分析的结果,在此基础上讨论了考虑分布式间歇干扰时STAP的优化设计。