Effect of wave shaper on reactive materials jet formation and its penetration performance

Wave shaper effect on formation behavior and penetration performance of reactive liner shaped charge (RLSC) are investigated by experiments and simulations. The reactive materials liner with a density of 2.3 g/cm³ is fabricated by cold pressing at a pressure of 300 MPa and sintering at a temperature of 380 °C. Experiments of the RLSC with and without wave shaper against steel plates are carried out at standoffs of 0.5, 1.0, and 1.5 CD (charge diameter), respectively. The experimental results show that the penetration depths and structural damage effects of steel plates decrease with increasing the standoff, while the penetration depths and the damage effects of RLSC without wave shaper are much greater than that with wave shaper at the same standoff. To understand the unusual experimental results, numerical simulations based on AUTODYN-2D code are conducted to discuss the wave shaper effect, including the propagation behavior of detonation wave, the velocity and temperature distribution of reactive jet, and penetration depth of reactive jet. The simulations indicate that, compared with RLSC without wave shaper, there is a higher temperature produced inside reactive jet with wave shaper. This unusual temperature rise effects are likely to be an important mechanism to cause the initiation delay time of reactive jet to decline, which results in significantly decreasing its penetration performance.     

如何运用交际教学法活跃语法教学

英语语法教学要根据教材内容补充真实的语言材料,保证输入材料的趣味性。在课堂教学中,围绕一个语言现象设计出各种真实的交际情景,从而避免单调乏味的语法讲解;设计丰富多彩的课堂活动,加强社会交际型练习,活跃课堂气氛,提高学生运用语法知识进行交际的能力;对于学生在课堂活动中出现的错误,应掌握适当的时机,及时纠错,在课堂上建立一种无拘无束的轻松愉快的学习环境。     

基于级库存的维修器材整合供应策略研究

针对传统器材供应模式效率低的问题,借助供应链管理的思想提出了多需求点整合供应模式,并建立了基于级库存策略的整合优化模型,对成本各组成部分分析求解,得到了最优总成本对应的策略参数,其中总成本考虑了供应中心补货成本、库存持有成本、供应成本和供应延迟成本．最后通过算例与直接供应策略进行了比较,证明了整合供应策略的有效性．     

高硬再制造表面强化层的加热切削研究

应用高性能硬质合金、陶瓷刀具和CBN刀具对常温条件下难以加工的高硬堆焊材料进行加热切削试验。试验结果表明：尽管加热条件下冲击效应降低,但CBN刀具仍然破损严重;陶瓷刀具虽然也无法实现理想的切削,但切削过程中刀具破损模式从崩碎式失效转变为磨损失效;3种刀具中高性能硬质合金应用效果最佳,其最佳参数条件下,一个切削里程后刀面VB值仅为0．3mm,试验过程中,刀具磨损随表面加热温度、切削速度、切削深度的提高而增大,但随进给量取值的增大而减小,其中切削速度对刀具VB值的影响最大,而进给量和削切深度对刀具VB值的影响较小。综合分析还表明：试验中刀具磨损速率仍然受刀具红硬性极限的限制。     

Chain damage effects of multi-spaced plates by reactive jet impact

Chain damage is a new phenomenon that occurs when a reactive jet impacts and penetrates multi-spaced plates.The reactive jet produces mechanical perforations on the spaced plates by its kinetic energy(KE),and then results in unusual chain rupturing effects and excessive structural damage on the spaced plates by its deflagration reaction.In the present study,the chain damage behavior is initially demonstrated by experiments.The reactive liners,composed of 26 wt％Al and 74 wt％PTFE,are fabricated through a pressing and sintering process.Three reactive liner thicknesses of 0.08 CD,0.10 CD and 0.12 CD(charge diameter)are chosen to carry out the chain damage experiments.The results show a chain rupturing phenomenon caused by reactive jet.The constant reaction delay time and the different penetration velocities of reactive jets from liners with different thicknesses result in the variation of the deflagration position,which consequently determines the number of ruptured plates behind the armor.Then,the finite-element code AUTODYN-3D has been used to simulate the kinetic energy only-induced rupturing effects on plates,based on the mechanism of behind armor debris(BAD).The significant discrepancies between simulations and experiments indicate that one enhanced damage mechanism,the behind armor blast(BAB),has acted on the ruptured plates.Finally,a theoretical model is used to consider the BAB-induced enhancement,and the analysis shows that the rupturing area on aluminum plates depends strongly upon the KE only-induced pre-perforations,the mass of reactive materials,and the thickness of plates.     

Nitro-tetrazole based high performing explosives: Recent overview of synthesis and energetic properties

Heterocyclic skeleton (Azoles) and different energetic groups containing high performing explosives are highly emerged in recent years to meet the challenging requirements of energetic materials in both military and civilian applications with improved performance. For this purpose tetrazole (Azole) is identified as an attractive heterocyclic backbone with energetic functional groups nitro (-NO₂), nitrato (-ONO₂), nitrimino (-NNO₂), and nitramino (–NH–NO₂) to replace the traditionally used high performing explosives. The tetrazole based compounds having these energetic functional groups demonstrated advanced energetic performance (detonation velocity and pressure), densities, and heat of formation (HOF) and became a potential replacement of traditional energetic compounds such as RDX. This review presents a summary of the recently reported nitro-tetrazole energetic compounds containing poly-nitro, di/mono-nitro, nitrato/nitramino/nitrimino, bridged/bis/di tetrazole and nitro functional groups, describing their preparation methods, advance energetic properties, and further applications as high-performing explosives, especially those reported in the last decade. This review aims to provide a fresh concept for designing nitro-tetrazole based high performing explosives together with major challenges and perspectives.     

Improvement of VIS and IR camouflage properties by impregnating cotton fabric with PVB/IF-WS2

In order to examine the possibility to improve its camouflage properties standard cotton fabric with camouflage print was impregnated with poly(vinyl butyral), PVB and fullerene-like nanoparticles of tungsten disulfide, PVB/IF-WS₂. FTIR analysis excluded any possible chemical interaction of IF-WS₂ with PVB and the fabric. The camouflage behavior of the impregnated fabric has been examined firstly in the VIS part of the spectrum. Diffuse reflection, specular gloss and color coordinates were measured for three different shades (black, brown and dark green). Thermal imaging was applied to examine the camouflage abilities of this impregnation in IR part of the spectrum. The obtained results show that PVB/IF-WS₂ impregnation system induced enhacement of the materials camouflage properties, i.e. that IF-WS₂ have a positive effect on spectrophotometric characteristics of the fabric.     

Study on energy release characteristics of reactive material casings under explosive loading

Reactive Materials (RMs), a new material with structural and energy release characteristics under shock-induced chemical reactions, are promising in extensive applications in national defense and military fields. They can increase the lethality of warheads due to their dual functionality. This paper focuses on the energy release characteristics of RM casings prepared by alloy melting and casting process under explosive loading. Explosion experiments of RM and conventional 2A12 aluminum alloy casings were conducted in free field to capture the explosive fireballs, temperature distribution, peak overpressure of the air shock wave and the fracture morphology of fragments of reactive material (RM) warhead casings by using high-speed camera, infrared thermal imager temperature and peak overpressure testing and scanning electron microscope. Results showed that an increase of both the fireball temperature and air shock wave were observed in all RM casings compared to conventional 2A12 aluminum ally casings. The RM casings can improve the peak overpressure of the air shock wave under explosion loading, though the results are different with different charge ratios. According to the energy release characteristics of the RM, increasing the thickness of RM casings will increase the peak overpressure of the near-field air shock wave, while reducing the thickness will increase the peak overpressure of the far-field air shock wave.     

低压终端线路无功补偿技术

随着经济发展,低压终端线路,特别是住宅负荷中,无功需求急剧增加。基于这一现状,提出了低压终端线路无功补偿问题。分析探讨了终端无功补偿设备与传统补偿设备的差异及应具的技术和特色,构划了系统总体设计方案,明确了该装置开发研究中应关注的主要问题及处理措施,指出开发专门终端无功补偿的必要性和紧迫性,为低压终端线路补偿装置的研制奠定了基础。