The building evacuation problem with shared information

In this article, the Building Evacuation Problem with Shared Information (BEPSI) is formulated as a mixed integer linear program, where the objective is to determine the set of routes along which to send evacuees (supply) from multiple locations throughout a building (sources) to the exits (sinks) such that the total time until all evacuees reach the exits is minimized. The formulation explicitly incorporates the constraints of shared information in providing online instructions to evacuees, ensuring that evacuees departing from an intermediate or source location at a mutual point in time receive common instructions. Arc travel time and capacity, as well as supply at the nodes, are permitted to vary with time and capacity is assumed to be recaptured over time. The BEPSI is shown to be NP‐hard. An exact technique based on Benders decomposition is proposed for its solution. Computational results from numerical experiments on a real‐world network representing a four‐story building are given. Results of experiments employing Benders cuts generated in solving a given problem instance as initial cuts in addressing an updated problem instance are also provided. © 2008 Wiley Periodicals, Inc. Naval Research Logistics, 2008     

建筑工程消防验收定量评定方法研究

依据中华人民共和国公安部印发的《建筑工程消防验收评定暂行办法》,建立了建筑工程消防验收系统。依据层次分析法对分级系统中各指标层,利用专家打分法确定其权重,设定不同的等级,确定不同等级下的权重系数,从而计算出建筑工程消防验收定量评定的标准。     

电子时间引信检测仿真试验研究

为提高电子时间引信的检测能力，介绍了电子时间引信检测仿真试验，分析了仿真试验的原理，给出了检测仿真试验的试验方法。经实际检测表明，该检测仿真试验能够安全可靠地完成电子时间引信的日常检测任务。     

使用双水压传感器抗风浪干扰原理

提出了在水雷上使用双水压传感器的设想.传统水雷只使用一个水压传感器,提供的信号信息稍嫌不足,给水压引信抗风浪干扰带来了限制.通过使用两个传感器,利用海浪水压场传播时在两个传感器上的时延信息,使用抵消方法压制海浪水压信号.初步分析表明,使用双传感器可以使水压引信抵抗一定的海浪水压信号的干扰.     

群体性事件情报预警困境的博弈分析

在公安边防部门辖区内，群体性事件时有发生，成为影响辖区治安的主要因素。如何基于所掌握的情报，找出一种科学合理的情报分析方法成为边防部门亟待解决的问题。从博弈论的角度，建立模型，用数学方法进行求解，对公安边防部门与群体性事件的策动者进行博弈分析。     

人本主义教育思想的德育解读与借鉴

人本主义教育思想在教育理念、教育目标、教育过程、教育方法、教育评价等方面均对德育具有借鉴意义。德育的目标指向：培育受教育者的完美人性;实施途径：强调受教育者的直接经验;德育模式：凸显受教育者的主体地位。     

Analysis of some critical aspects in hot machining of Ti-5553 superalloy: Experimental and FE analysis

In this study, a newly developed titanium superalloy, i.e., the Ti-5553 alloy has used for hot machining. This material replaced Ti-grade-5 alloy in the application of aerospace, automobile, and biomedical sector. However, similar to Ti-grade-5 alloy, the Ti-5553 alloy has a low thermal conductivity which makes it difficult-to-cut material categories hence, high tool wear, cutting force and bad surface finish. Hot machining of Ti-5553 has been studied at different machining condition (room and hot) using Deform-2D finite element analysis. The result from the simulation test was compared with the experimental value and reduction of cutting and thrust forces was observed. The experiment was carried out with the same input parameters as simulation, and good coherence between them observed. Additionally, cutting zone temperature, effective stress, etc. for both room and elevated the temperature are also discussed.     

Cell structure of microcellular combustible object foamed by supercritical carbon dioxide

In order to solve the issue that the combustible objects for cased telescoped ammunition (CTA) didn't burn completely during the combustion process, the microcellular combustible objects were foamed with numerous cells in the micron order to improve the combustion performance by the supercritical carbon dioxide (SCCO₂) foaming technology. As the cell structure determined the combustion properties of microcellular combustible objects, the solubility of SCCO₂ dissolved into the combustible objects was obtained from the gravimetric method, and scanning electron microscope (SEM) was applied to characterize the cell structure under various process conditions of solubility, foaming temperature and foaming time. SEM images indicate that the cell diameter of microcellular combustible objects is in the level of 1 μm and the cell density is about 10¹¹ cell⋅cm⁻³. The microcellular combustible objects fabricated by the SCCO₂ foaming technology are smooth and uniform, and the high specific surface area of cell structure can lead to the significant combustion performance of microcellular combustible object for CTA in the future.     

基于ADC的炮兵激光观测仪侦察效能分析

运用了效能分析方法,针对复杂战场环境下炮兵侦察系统的效能进行分析,特别是炮兵激光观测仪,揭示其内在规律,为提高现有侦察装备的作战效能找到重要途径,也为指挥员的决策提供可靠的战略支持.在侦察系统效能分析理论的基础上,对典型的激光观测仪侦察装备进行了计算评估验证,其方法和成果可供其他武器系统效能评估时借鉴参考.     

基于博弈论的装备科研、购置、维修经费比例关系优化分析

通过不同时期国家战略部署、科研发展情况及经济承受能力对装备经费分配的影响分析,采用博弈的方法,建立了装备科研、购置和维修费之间的比例关系优化模型,给出了寻求纳什均衡点的迭代算法,并进行了仿真计算.仿真结果证明了该方法的可行性与正确性.