SG高压水室在典型循环工况下的低周疲劳评估

本文应用有限元分析了ＳＧ高压水室在典型负荷波动下的热应力,根据所计算出的峰值应力循环幅,引用低周疲劳设计曲线,对结构的低周疲劳用ＡＳＭＥ规范进行了评估,发现ＳＧ在典型载荷循环下不产生显著的低周疲劳损伤。     

利用Roothaan-Hartree-Fock 原子波函数计算的低能电子被He和Ar原子弹性散射截面

利用原子的Roothaan-Hartree-Fock波函数计算了低能e~--He和e~--Ar弹性散射截面。计算采用模型势方法,其中包括静电势、交换势和极化势。计算结果和实验吻合较好。通过把我们的计算结果和其他作者利用不同原子波函数的计算结果进行比较,讨论了不同原子波函数之间的差别对计算结果的影响。     

Effect of welding processes and consumables on fatigue crack growth behaviour of armour grade quenched and tempered steel joints

Quenched and Tempered (Q&T) steels are widely used in the construction of military vehicles due to its high strength to weight ratio and high hardness. These steels are prone to hydrogen induced cracking (HIC) in the heat affected zone (HAZ) after welding. The use of austenitic stainless steel (ASS) consumables to weld the above steel was the only available remedy because of higher solubility for hydrogen in austenitic phase. The use of stainless steel consumables for a non-stainless steel base metal is not economical. Hence, alternate consumables for welding Q&T steels and their vulnerability to HIC need to be explored. Recent studies proved that low hydrogen ferritic steel (LHF) consumables can be used to weld Q&T steels, which can give very low hydrogen levels in the weld deposits. The use of ASS and LHF consumables will lead to distinct microstructures in their respective welds. This microstructural heterogeneity will have a drastic influence in the fatigue crack growth resistance of armour grade Q&T steel welds. Hence, in this investigation an attempt has been made to study the influence of welding consumables and welding processes on fatigue crack growth behaviour of armour grade Q&T Steel joints. Shielded metal arc welding (SMAW) and Flux cored arc welding (FCAW) were used for fabrication of joints using ASS and LHF consumables. The joints fabricated by SMAW process using LHF consumable exhibited superior fatigue crack growth resistance than all other joints.     

用LIIF法测量DF/HF化学激光器喷管混合性能的数值分析

激光诱导碘荧光(LIIF)是一种很好的流场测量技术,为了验证该方法测量化学激光器流场混合性能的精度,模拟得到连续波DF HF化学激光器的HYLTE喷管冷流场,并计算了用氦碘混合气体作为氧化剂流、用氦气作为燃料流的HYLTE喷管的流场。通过比较前一流场中的氟原子和后一流场中的碘分子的摩尔百分比分布情况得知,当作为氧化剂流的氦碘混合物中碘的质量百分比在54%左右时,用LIIF法测量DF HF化学激光器喷管的混合情况具有较高的精度。     

Polarization visualization for low-irradiance regions by perceptually uniform color space

Currently,polarization visualization strategies are accomplished by mapping polarization information into a perceptually uniform color appearance model CAM02-UCS.However,the deviation of the CAM02-UCS space from the lightness prediction results in an inaccurate match between the polarization in-formation and the perceptual information.In this paper,we propose a novel polarization visualization strategy based on the perceptual uniform space Jzazbz.The polarization visualization be completed by placing the polarization information into the lightness Jz,colorfulness Cz and hue angle hz channels of the Jzazbz space.The experimental results show that the proposed method can significantly improve the lightness of the low irradiance and high polarization region,hence more polarization information can be sensed by human visual system.     

垂直发射低空超低空防空导弹杀伤区近界研究

以低空超低空防空导弹为研究对象,分析了影响其杀伤区近界的主要因素,并针对其采取垂直冷发射的特殊发射方式,应用快速姿态调转的方法,保证了导弹由姿态调转段到制导段的动态误差小。提出了有效的控制方式,进行了大量的典型弹道的数学仿真,从结果来看,这种设计可以将低空超低空防空导弹的杀伤区近界压至接近最小。     

机载多功能射频系统是21世纪防空电子对抗的新威胁

美国空军第四代战斗机F-22上的低可探测性(LO)多功能射频系统(MFRFS)AN/APG-77,以及将要为联合攻击战斗机(JSF)设计研制的机载多功能射频系统(MFRFS),主要特征是使用了先进的有源电扫阵(AESA)天线.通过对AESA的共享,F-22的MFRFS能同时执行雷达、电子战和通信功能,其超视距目标探测、识别与拦截能力,丰富多彩的电子对抗招式,以及飞机具有的低可探测性能,使之成为21世纪夺取空中优势的重要武器系统,必将给未来防空电子对抗构成严峻的挑战.     

基于粒子群优化算法的低空突防航迹规划

本文提出了运用粒子群优化算法来对飞机低空突防进行航迹规划的方法。首先,说明了飞机突防需要满足的物理限制和战术要求。其次,根据低空突防航迹规划约束多,计算复杂的特点引入粒子群优化算法,并且对其进行简要的介绍。应用粒子群优化算法对低空突防战术进行航迹规划。最后实验结果表明,该方法能够对飞机低空突防过程规划出可行的飞行航迹。     

防空导弹成本与防空导弹武器装备建设

在分析低成本防空导弹概念和需求的基础上,探讨了防空导弹武器系统的成本分解结构和对成本价格的敏感因素,研究了实现低成本的可行性、必要性及其与陆军防空装备体系建设的关系。     

柴油机排气噪声的有源控制研究

对四缸四冲程柴油机（4－85）1500r／min时的排气噪声的低频进行了分析利用声辐射理论,设计出引入次级声场的装置．对排气管与机器相连接法兰盘上的振动信号与噪声信号进行了相干函数分析．此外,利用高速信号处理芯片TMS320C25完成了一套自适应控制系统的初步设计．