班主任应具备的基本素质和工作方法

班主任工作的好坏,直接影响着学校整体学生管理工作。提高班主任素质,不断探索班主任工作的新途径、新方法,才能实现班主任工作的新突破,开创班主任工作的新局面。     

碳纤维/双马来酰亚胺复合材料修复性能

为了得到碳纤维/双马来酰亚胺复合材料最佳修复效果,采用碳纤维/环氧复合材料和环氧胶膜作为修复材料,对带Φ15 mm和Φ5 mm预制孔碳纤维/双马来酰亚胺复合材料进行单面贴补、双面贴补和单面阶梯挖补修复。研究了补片长度、厚度和铺层顺序对修复效果的影响,并结合修复试样的拉伸断裂模式,优化了修复参数。结果表明:补片边缘母板中存在的应力集中和厚度方向拉伸应力是导致母板断裂的关键原因;双面贴补修复试样拉伸强度能恢复到完好试样的90%以上,单面贴补和阶梯挖补修复试样拉伸强度能恢复到完好试样的80%以上。     

高速水射流倒空弹体装药安全性研究

本文阐述了高速水射流倒空弹体装药的机理,建立了确定水射流引爆炸药的临界速度的模拟实验方法和模型,进行了高速水射流冲击炸药的安全性试验,并对试验结果进行了分析,证明在工作泵压下高速水射流倒空弹体装药安全、可靠。     

GEO导航星广播星历拟合改进算法设计

设计了倾角较小的GEO导航星的广播星历拟合算法。该方法的核心思想是在常规拟合算法的基础上对位置观测量进行合理的坐标系参考平面旋转,特别是提出针对拟合迭代初值进行相应的坐标变换,从而既可以解决轨道参数拟合的相关性问题,使轨道参数拟合快速收敛,同时又兼顾了用户接收机的计算简便化。通过仿真验证,该方法简洁有效,拟合中误差RMS在厘米量级,能够保证拟合精度。     

利用火箭深弹系统拦截鱼雷的技术改进方法探析

多功能、多用途是火箭深弹系统的主要发展方向之一。根据水面舰艇武器装备的实际,仅从拦截潜艇发射的鱼雷角度出发,对舰载火箭深弹系统拦截来袭鱼雷的可行性进行了分析。在此基础上,探讨了利用火箭深弹系统拦截鱼雷的系统选择、深弹战斗部的开发、引信选型、发射管安装及配置、火控系统的改进等关键问题,并提出了一些具体的改进方法。     

悬浮式深弹反鱼雷武器系统的有效拦截域分析

针对悬浮式深弹反鱼雷武器系统在作战使用中需对目标的可拦性进行快速判断的需求,提出了系统有效拦截域的概念,又根据系统作战流程和工作原理,将有效拦截域判断条件细化为时间域和空间域两个方面判据,进而构建了基于实战中可获取的战场态势等相关信息计算系统有效拦截域的数学模型,并具体给出了一个计算实例。研究结果可为其作战使用提供一定参考。     

Effect of wave shaper on reactive materials jet formation and its penetration performance

Wave shaper effect on formation behavior and penetration performance of reactive liner shaped charge (RLSC) are investigated by experiments and simulations. The reactive materials liner with a density of 2.3 g/cm³ is fabricated by cold pressing at a pressure of 300 MPa and sintering at a temperature of 380 °C. Experiments of the RLSC with and without wave shaper against steel plates are carried out at standoffs of 0.5, 1.0, and 1.5 CD (charge diameter), respectively. The experimental results show that the penetration depths and structural damage effects of steel plates decrease with increasing the standoff, while the penetration depths and the damage effects of RLSC without wave shaper are much greater than that with wave shaper at the same standoff. To understand the unusual experimental results, numerical simulations based on AUTODYN-2D code are conducted to discuss the wave shaper effect, including the propagation behavior of detonation wave, the velocity and temperature distribution of reactive jet, and penetration depth of reactive jet. The simulations indicate that, compared with RLSC without wave shaper, there is a higher temperature produced inside reactive jet with wave shaper. This unusual temperature rise effects are likely to be an important mechanism to cause the initiation delay time of reactive jet to decline, which results in significantly decreasing its penetration performance.     

压剪加载下炸药装药中剪切带形成与发展模型

研究了在压剪加载下炸药这类粘塑性介质中剪切带的形成与发展。提出了一种反映炸药装药中剪切带形成和发展的计算方法,并分析了剪切带发展变化特性与炸药起爆的关系     

Theoretical and numerical simulation study on jet formation and penetration of different liner structures driven by electromagnetic pressure

The use of a shaped liner driven by electromagnetic force is a new means of forming jets. To study the mechanism of jet formation driven by electromagnetic force, we considered the current skin effect and the characteristics of electromagnetic loading and established a coupling model of"Electric—Magnetic—Force"and the theoretical model of jet formation under electromagnetic force. The jet formation and penetration of conical and trumpet liners have been calculated. Then, a numerical simulation of liner collapse under electromagnetic force, jet generation, and the stretching motion were performed using an ANSYS multiphysics processor. The calculated jet velocity, jet shape, and depth of penetration were consistent with the experimental results, with a relative error of less than 10％. In addition, we calculated the jet formation of different curvature trumpet liners driven by the same loading condition and ob-tained the influence rule of the curvature of the liner on jet formation. Results show that the theoretical model and the ANSYS multiphysics numerical method can effectively calculate the jet formation of liners driven by electromagnetic force, and in a certain range, the greater the curvature of the liner is, the greater the jet velocity is.     

Investigate the effects of magnetic fields on the penetration ability of a shaped charge jet at different standoffs

The influence of a magnetic field on the stability of a shaped charge jet is experimentally investigated at standoffs of 490, 650 and 800 mm. The experimental results without and with the magnetic field are compared in terms of the shaped charge jet form, stability and penetration ability. A theoretical model based on one-dimension fluid dynamics is then developed to assess the depth of penetration of the shaped charge at those three standoffs and magnetic conditions. The results show that the penetration capability can be enhanced in more than 70% by the magnetic field. The theoretical calculations are compared with the experimental results with reasonably good correlation. In addition, the parameters introduced in the theory are discussed together with the experiments at three standoffs studied.