飞机机翼结构损伤仿真研究

飞机结构的战伤模式及战伤程度预测对于制定战场抢修预案及改进战斗生存力设计具有重要意义。采用计算机模拟仿真技术定量分析了飞机机翼结构遭受射弹攻击后的损伤情况。通过损伤仿真讨论了3类情形,一是机翼结构受到简单的侵彻后的冲击效应;二是高速射弹攻击带有翼盒的机翼,而产生流体动力冲压效应;三是在射弹冲击模型中增加爆炸条件,研究射弹以任意角度冲击不同的位置产生的耦合效应。基于AN SY S/LS-DYNA仿真,给出了机翼结构损伤的结果,结论为战伤飞机战场抢修的快速评估提供了科学依据,也为飞机平时修理提供了参考。     

Damage modeling of ballistic penetration and impact behavior of concrete panel under low and high velocities

This work presents a numerical simulation of ballistic penetration and high velocity impact behavior of plain and reinforced concrete panels. This paper is divided into two parts. The first part consists of numerical modeling of reinforced concrete panel penetrated with a spherical projectile using concrete damage plasticity (CDP) model, while the second part focuses on the comparison of CDP model and Johnson-Holmquist-2 (JH-2) damage model and their ability to describe the behavior of concrete panel under impact loads. The first and second concrete panels have dimensions of 1500 mm × 1500 mm × 150 mm and 675 mm × 675 mm × 200 mm, respectively, and are meshed using 8-node hexahedron solid elements. The impact object used in the first part is a spherical projectile of 150 mm diameter, while in the second part steel projectile of a length of 152 mm is modeled as rigid element. Failure and scabbing characteristics are studied in the first part. In the second part, the com-parison results are presented as damage contours, kinetic energy of projectile and internal energy of the concrete. The results revealed a severe fracture of the panel and high kinetic energy of the projectile using CDP model comparing to the JH-2 model. In addition, the internal energy of concrete using CDP model was found to be less comparing to the JH-2 model.     

Damage mechanics and energy absorption capabilities of naturalfiber reinforced elastomeric based bio composite for sacrificial structural applications

The present study deals with the experimental, finite element (FE) and analytical assessment of low ballistic impact response of proposedflexible'green' composite make use of naturally available jute and rubber as the constituents of the composite with stacking sequences namely jute/rubber/jute (JRJ), jute/rubber/rubber/jute (JRRJ) and jute/rubber/jute/rubber/jute (JRJRJ). Ballistic impact tests were carried out by firing a conical projectile using a gas gun apparatus at lower range of ballistic impact regime. The ballistic impact response of the proposed flexible composites are assesses based on energy absorption and damage mechanism. Results revealed that inclusion of natural rubber aids in better energy ab-sorption and mitigating the failure of the proposed composite. Among the three different stacking se-quences of flexible composites considered, JRJRJ provides better ballistic performance compared to its counterparts. The damage study reveals that the main mechanism of failure involved in flexible com-posites is matrix tearing as opposed to matrix cracking in stiff composites indicating that the proposedflexible composites are free from catastrophic failure. Results obtained from experimental, FE and analytical approach pertaining to energy absorption and damage mechanism agree well with each other. The proposed flexible composites due to their exhibited energy absorption capabilities and damage mechanism are best suited as claddings for structural application subjected to impact with an aim of protecting the main structural component from being failed catastrophically.     

Damage behavior of the KKV direct hit against fluid-filled submunition payload

The damage effects of fluid-filled submunition payload impacted by the kinetic kill vehicle (KKV) are investigated by simulations and ground-based experiments. Numerical simulations showed that the damage level and number of submunitions were significantly influenced by the diameter of the KKV compared with its length. Based on that, a high velocity penetrator formed by shaped charge explosion was used to simulate the direct hit experiment of a KKV impacting submunition payload. Experimental results demonstrated that the damage modes of submunitions mainly included the slight damage, perforation and total smash, showing a good agreement with the simulations. To understand the multiple damage modes of submunitions, the damage behavior of the submunitions in direct hit process were analyzed based on the AUTODYN-3D code. Numerical results presented that increased KKV diameter can increase the crater diameter and expand the damage volume, which will achieve a higher direct hit lethality. Further analysis indicated that there were other mechanical behaviors can enhance the damage to submunitions not lying in the KKV flight path, such as secondary debris kill, neighboring submunitions collision with each other, and high-speed fluid injection effect.     

Analysis on damage characteristics and detonation performance of solid rocket engine charge subjected to jet

To further explore the damage characteristics and impact response of the shaped charge to the solid rocket engine (SRE) in storage or transportation, protective armor was designed and the shelled charges model (SCM)/SRE with protective armor impacting by shaped charge tests were conducted. Air overpressures at 5 locations and axial acceleration caused by the explosion were measured, and the experimental results were compared with two air overpressure curves of propellant detonation obtained by related scholars. Afterwards, the finite element software AUTODYN was used to simulate the SCM impacted process and SRE detonation results. The penetration process and the formation cause of damage were analyzed. The detonation performance of TNT, reference propellant, and the propellant used in this experiment was compared. The axial acceleration caused by the explosion was also analyzed. By comprehensive comparison, the energy released by the detonation of this propellant is larger, and the HMX or Al particles contained in this propellant are more than the reference propellant, with a TNT equivalent of 1.168–1.196. Finally, advanced protection armor suggestions were proposed based on the theory of woven fabric rubber composite armor (WFRCA).     

玻璃纤维增强复合材料的损伤分析

本文对玻璃纤维增强复合材料层合板进行了拉、剪多向应力本构关系的实验研究,成功地用软x射线照相观察到材料内部微裂纹沿纤维方向近似均匀分布,并沿裂纹面扩展至破坏的损伤形貌,同时结合声发射技术等监测其扩展规律。在此基础上建立了基于微观机制的微裂纹损伤模型,预测材料的损伤非线性本构关系和破坏,以及实验观察到的一些复合材料特有的损伤现象,理论预测结果与实验值吻合。     

Influence of thickness and projectile shape on penetration resistance of the compliant composite

The present study deals with development of conceptual proof for jute rubber basedflexible composite block to completely arrest the projectile impacting the target at high velocity impact of 400 m/s through numerical simulation approach using finite element (FE) method. The proposed flexible composite blocks of repeating jute/rubber/jute (JRJ) units are modelled with varying thickness from 30 mm to 120 mm in increments of 30 mm and impacted by flat (F), ogival (O) and hemispherical (HS) shaped projectiles. All the considered projectiles are impacted with proposed flexible composite blocks of different thicknesses and the penetration behaviour of the projectile in each case is studied. The penetration depth of the projectile in case of partially penetrated cases are considered and the effect of thickness and projectile shape on percentage of penetration depth is statistically analyzed using Tagu-chi's design of experiments (DOE). Results reveal that the though proposedflexible composite block with thickness of 90 mm is just sufficient to arrest the complete penetration of the projectile, considering the safety issues, it is recommended to use theflexible composite with thickness of 120 mm. The nature of damage caused by the projectile in the flexible composite is also studied. Statistical studies show that thickness of the block plays a prominent role in determining the damage resistance of the flexible composite.     

不可预见作战下排弹抢修力量编配分析

在资源有限的情况下,综合考虑某一区域不同机场之间的相互关系,从整体的角度合理分配排弹抢修资源,可以大幅提升区域内军队机场阵地的战场排弹抢修能力。本文通过建立数学模型,从整体的角度出发,分析区域内各机场的排弹抢修资源分配问题：首先,针对不可预见作战带来的新挑战,提出了新的机场排弹抢修作业流程,引出排弹抢修力量分配所面临的几个现实问题;其次,为解决提出的问题,建立计算排弹抢修时间的数学模型;最后,利用建立的模型依次对上述问题进行分析,并给出排弹抢修资源编配与力量建设的建议。本研究认为,军事机场排弹抢修力量应根据机场特点,合理分配排弹抢修资源;要以机场排弹抢修力量为主导,以外部支援力量为辅助,提升机场自身排弹抢修能力;可通过建设排弹抢修物资仓库和设置排弹抢修支援小组,提升多机场联动的排弹抢修能力。     

Improving the damage potential of W-Zr reactive structure material under extreme loading condition

Projectiles made of reactive structure materials(RSM)can damage the target with not only kinetic but also chemical energy,but the enhanced damage potential of RSM may become compromised if extreme loading condition disintegrates the projectile before the target is reached.In this work,a ductile coating of Ni was introduced to a tungsten-zirconium(W-Zr)alloy,a typical brittle RSM,to preserve the damage potential of the projectile.Detonation driving tests were carried out with X-ray photography and gun-powder deflagration driving tests were carried out with high-speed photography for the coated and uncoated RSM samples,respectively.The craters on the witness target were analyzed by scanning electron microscopy and X-ray diffraction.The Ni coating was found to effectively preserve the damage potential of the W-Zr alloy under extreme loading conditions,whereas the uncoated sample fractured and ignited before impacting the target in both detonation and deflagration driving.The crack propa-gation between the reactively brittle core and the ductile coating was analyzed based on the crack arrest theory to mechanistically demonstrate how the coating improves the structural integrity and preserves the damage potential of the projectile.Specifically,the Ni coating envelops the W-Zr core until the coated sphere penetrates the target,and the coating is then eroded and worn to release the reactive core for the projectile to damage the target more intensively.     

金属泡沫复合材料夹芯结构的压痕响应实验

金属泡沫夹芯结构是近年来新出现的一种明显具有结构和功能一体化特点的新型轻质材料,它在临近空间飞行器、航海及汽车等领域有着广阔的应用前景。以以纤维增强复合材料面板、闭孔泡沫铝芯子为特征的复合材料夹芯结构为研究对象,对其在球形压头作用下的压痕响应、损伤模式、变形机制和失效机理进行理论分析和实验研究。研究发现,泡沫铝复合材料夹芯结构的压痕响应是夹芯结构的各个组成部分的响应、相互作用以及压头属性的综合作用结果。泡沫铝复合材料夹芯结构在球压头作用下的损伤模式为基体开裂、纤维断裂、层间分层、泡沫铝的屈服及剪切断裂五种失效模式。