On the bivariate negative binomial distribution of mitchell and paulson

The bivariate negative binomial distribution of Mitchell and Paulson [17] for the case b = c = 0 is shown to be equivalent to the accident proneness model of Edwards and Gurland [4] and Subrahmaniam [19,20]. The diagonal series expansion of its joint probability function is then derived. Two other formulations of this distribution are also considered: (i) as a mixture model, which showed how it arises as the discrete analogue to the Wicksell-Kibble bivariate gamma distribution, and (ii) as a consequence of the linear birth-and-death process with immigration.     

考虑外场差异的步进加速寿命数据可靠性评估方法

针对寿命服从双参数Weibull分布的机电产品,进行单应力、定时转换的步进加速寿命试验,研究加速寿命试验数据下的可靠性评估问题。考虑到外场多应力环境与实验室单一应力环境之间的差异性,构建基于修正系数的分布参数计算模型;开展步进加速寿命试验过程的统计分析,建立各应力下的累计分布函数关系;构建极大似然函数,运用数值迭代法,求解未知参数估计;结合某型机电产品进行仿真方案设计,采用Monte Carlo仿真方法产生样本数据,通过对比分析说明所提出的模型评估精度更高。     

Determination of burn‐in parameters and residual life for highly reliable products

Today, many products are designed and manufactured to function for a long period of time before they fail. Determining product reliability is a great challenge to manufacturers of highly reliable products with only a relatively short period of time available for internal life testing. In particular, it may be difficult to determine optimal burn‐in parameters and characterize the residual life distribution. A promising alternative is to use data on a quality characteristic (QC) whose degradation over time can be related to product failure. Typically, product failure corresponds to the first passage time of the degradation path beyond a critical value. If degradation paths can be modeled properly, one can predict failure time and determine the life distribution without actually observing failures. In this paper, we first use a Wiener process to describe the continuous degradation path of the quality characteristic of the product. A Wiener process allows nonconstant variance and nonzero correlation among data collected at different time points. We propose a decision rule for classifying a unit as normal or weak, and give an economic model for determining the optimal termination time and other parameters of a burn‐in test. Next, we propose a method for assessing the product's lifetime distribution of the passed units. The proposed methodologies are all based only on the product's initial observed degradation data. Finally, an example of an electronic product, namely contact image scanner (CIS), is used to illustrate the proposed procedure. © 2002 Wiley Periodicals, Inc. Naval Research Logistics, 2003     

Signature based analysis of m‐Consecutive‐k‐out‐of‐n: F systems with exchangeable components

In this article, we study reliability properties of m‐consecutive‐k‐out‐of‐n: F systems with exchangeable components. We deduce exact formulae and recurrence relations for the signature of the system. Closed form expressions for the survival function and the lifetime distribution as a mixture of the distribution of order statistics are established as well. These representations facilitate the computation of several reliability characteristics of the system for a given exchangeable joint distribution or survival function. Finally, we provide signature‐based stochastic ordering results for the system's lifetime and investigate the IFR preservation property under the formulation of m‐consecutive‐k‐out‐of‐n: F systems. © 2011 Wiley Periodicals, Inc. Naval Research Logistics, 2011     

Optimal inventory policies in contagious demand models

In the past, contagious distributions have been successfully applied in bacteriology, entomology, and accident statistics. This paper applies the notion of contagious distributions in the inventory control of new products and seasonal or style goods, which have an lying “true contagion” for their demands, namely, the influence of past demands on occurrence of demands. A contagious distribution is derived by assuming a nonstationary Poisson process where the demand rate at any instant depends on the past demands to that instant. Using this contagious distribution, an inventory model is developed seasonal goods and new product lines. Optimal order policies as a function of the initial level and the review period are derived.     

A cost analysis of sampling inspection under Military Standard 105D

Military Standard 105D has been almost universally adopted by government and private consumers for the lot-by-lot sampling inspection of product which may be inspected on a dichotomoun basis The plan specifies, for each lot size, a random sample size and set of acceptance numbers (maximum allowable number of defectives in each sample). The acceptance numbers are based upon the binomial distribution and depend upon the quality required by the purchaser. Where several consecutive lots are submitted, a shift to less severe (“reduced”) inspection or more severe (“tightened”) inspection is specified when the ongoing quality is very high or low. Further experience permits a return to normal sampling from either of these states This paper examines the long range costs of such a sampling scheme. The three inspection types are considered as three distinct Markov chains, with periodic transitions from chain to chain. The expected sample size and the expected proportion of rejected product are determined as a function of the two parameters under control of the manufacturer, lot size and product quality. Some numerical examples are given which illustrate how to compute the overall cost of sampling inspection. Suggestions are made concerning the choice of parameters to minimize this cost.     

Estimating failure time distribution and its parameters based on intermediate data from a Wiener degradation model

Instead of measuring a Wiener degradation or performance process at predetermined time points to track degradation or performance of a product for estimating its lifetime, we propose to obtain the first‐passage times of the process over certain nonfailure thresholds. Based on only these intermediate data, we obtain the uniformly minimum variance unbiased estimator and uniformly most accurate confidence interval for the mean lifetime. For estimating the lifetime distribution function, we propose a modified maximum likelihood estimator and a new estimator and prove that, by increasing the sample size of the intermediate data, these estimators and the above‐mentioned estimator of the mean lifetime can achieve the same levels of accuracy as the estimators assuming one has failure times. Thus, our method of using only intermediate data is useful for highly reliable products when their failure times are difficult to obtain. Furthermore, we show that the proposed new estimator of the lifetime distribution function is more accurate than the standard and modified maximum likelihood estimators. We also obtain approximate confidence intervals for the lifetime distribution function and its percentiles. Finally, we use light‐emitting diodes as an example to illustrate our method and demonstrate how to validate the Wiener assumption during the testing. © 2008 Wiley Periodicals, Inc. Naval Research Logistics, 2008     

A note on adaptive boiler tube pulling

This paper develops an adaptive algorithm for determining boiler tube pulling strategies by postulating a Beta prior on the probability that an individual tube is defective. This prior is updated according to Bayes' Rule as a result of the sample obtained during the tube pulling process.     

相似分布特性准则下的高斯混合项聚类-合并算法

针对高斯混合模型估计非高斯系统时高斯混合项呈指数级增长问题，提出一种基于相似分布特性准则的聚类-合并方法。通过分析高斯混合项的分布特性，基于扩展积分均方误差代价函数搜索最优置信范围，并对混合项进行高斯聚类，进而获得具有不同分布特性的高斯簇。为防止高斯簇间对高斯子项的重复利用，引入局部最近邻思想对交叉高斯项进行重新分配。采用并行多元素合并方法对高斯簇中的混合项进行合并，在保证无偏性基础上减少下一时刻混合项数量。仿真结果表明，改进算法在保证跟踪精度的同时还可有效提高算法效率。     

多窗口谱图分析的低截获概率雷达信号识别

在当前复杂的战场环境中,低截获概率雷达信号因其具有大时宽带宽积、强干扰性能、高分辨率和低截获性特点得到了广泛应用,传统的雷达侦察手段很难对其进行有效识别.在低截获概率雷达典型调制分析的基础之上,研究基于人工智能的雷达信号分类识别方法.从低截获概率雷达信号时频特征入手,提出基于多窗口时频谱图分析方法.该算法采用Hermi...     

维护条件下产品寿命分布规律分析

为了掌握维护条件下产品寿命分布规律,进一步解释其失效特性,从维护条件下产品性能状态变化角度出发,结合累积失效理论,利用复合Poisson过程建立了可靠性模型,得到了该条件下产品在线寿命分布模型。在此基础上,建立了维护条件下产品总体寿命分布模型,并利用偏度-峰度系数和贴近度分析,对维护条件下产品在线寿命分布和总体寿命分布规律进行了数值计算,解释了工程产品在线往往具有集中失效,而总体又具有随机失效的特性。以水泵转子为研究对象,通过数值分析,较好地描述了其定期维护条件下的可靠度和寿命分布,进一步验证了模型的可行性。     

An adaptive dynamic programming algorithm for a stochastic multiproduct batch dispatch problem

We address the problem of dispatching a vehicle with different product classes. There is a common dispatch cost, but holding costs that vary by product class. The problem exhibits multidimensional state, outcome and action spaces, and as a result is computationally intractable using either discrete dynamic programming methods, or even as a deterministic integer program. We prove a key structural property for the decision function, and exploit this property in the development of continuous value function approximations that form the basis of an approximate dispatch rule. Comparisons on single product‐class problems, where optimal solutions are available, demonstrate solutions that are within a few percent of optimal. The algorithm is then applied to a problem with 100 product classes, and comparisons against a carefully tuned myopic heuristic demonstrate significant improvements. © 2003 Wiley Periodicals, Inc. Naval Research Logistics 50: 742–769, 2003.     

AN ALGORITHM FOR THE SEGREGATED STORAGE PROBLEM

The segregated storage problem involves the optimal distribution of products among compartments with the restriction that only one product may be stored in each compartment. The storage capacity of each compartment, the storage demand for each product, and the linear cost of storing one unit of a product in a given compartment are specified. The problem is reformulated as a large set-packing problem, and a column generation scheme is devised to solve the associated linear programming problem. In case of fractional solutions, a branch and bound procedure is utilized. Computational results are presented.     

Warranty policies and burn-in

Warranty is an important factor for consumer durable products in the marketplace. However, the warranty cost may drastically reduce profitability. Burn in is a common procedure to improve the quality of products after they have been produced, but it is also costly. By taking both the burn-in procedure and warranty policy into consideration, several cost functions can be formulated and optimized. Assuming that the failure-rate function of the product has a bathtub shape, it is shown that the optimal burn-in times that minimize the considered cost functions never exceed the first change point of the failure-rate function. The continuous dependence of the optimal burn-in times on the model parameters and the underlying distribution is also established. © 1997 John Wiley & Sons, Inc. Naval Research Logistics 44: 199–209, 1997     

T型分支坑道对油气爆炸传播特性的影响

为研究T型分支坑道对油气爆炸传播特性的影响,通过对比实验,测定了相同初始条件下T型分支坑道和直坑道中油气混合物爆炸的火焰传播速度和爆炸波超压值。利用高速摄影仪,记录了火焰传播至T型分支坑道时的火焰阵面变化情况,并对T型分支坑道中油气混合物爆炸的传播情况进行了理论分析。结果表明：T型分支坑道对油气混合物爆炸的影响可以视为面积突扩和障碍物扰动双重作用的影响;火焰经过支坑道时,火焰阵面发生扭曲并产生皱褶,表面积增大导致火焰传播速度增大;T型分支坑道处,大量反射波和绕射波进入波后反应区,加强了气流湍流强度,并推动已燃气体回传,迅速提高了燃烧反应速度和能量释放率,起到了增大火焰传播速度和爆炸波超压值的作用。     

关于Smarandache序列Pd（n）和qd（n）的均值估计

对任意正整数n,Pd（n）定义为n的所有正因子的乘积,gd（n）定义为n的所有小于n的正因子的乘积。若n=p1^a1p2^a2…px^as是n的标准分解式,算数函数Ω（n）=a1＋a2＋…＋as。用解析的方法研究关于Smarandache序列Pd（n）、qd（n）与Q（n）的混合均值,并给出两个较好的渐近公式。     

Pairwise model discrimination with applications in lifetime distributions and degradation processes

Reliability data obtained from life tests and degradation tests have been extensively used for purposes such as estimating product reliability and predicting warranty costs. When there is more than one candidate model, an important task is to discriminate between the models. In the literature, the model discrimination was often treated as a hypothesis test and a pairwise model discrimination procedure was carried out. Because the null distribution of the test statistic is unavailable in most cases, the large sample approximation and the bootstrap were frequently used to find the acceptance region of the test. Although these two methods are asymptotically accurate, their performance in terms of size and power is not satisfactory in small sample size. To enhance the small‐sample performance, we propose a new method to approximate the null distribution, which builds on the idea of generalized pivots. Conventionally, the generalized pivots were often used for interval estimation of a certain parameter or function of parameters in presence of nuisance parameters. In this study, we further extend the idea of generalized pivots to find the acceptance region of the model discrimination test. Through extensive simulations, we show that the proposed method performs better than the existing methods in discriminating between two lifetime distributions or two degradation models over a wide range of sample sizes. Two real examples are used to illustrate the proposed methods.     

加速寿命试验下复合失效产品的可靠性评估

产品往往受随机失效和耗损失效两种模式的双重影响,通过构建复合寿命分布模型来表征这类产品失效规律。在加速寿命试验下,基于极大似然估计构造了该类产品寿命参数估计的数值算法;为了验证该寿命分布是否真服从假定的复合分布,构建了常应力等效失效数据的柯尔莫哥诺夫分布检验法;最后,以电连接器这一典型产品为例进行了工程仿真试验并进行数据评估,从而验证了评估方法的正确性。     

Approximate dynamic programming methods for an inventory allocation problem under uncertainty

We propose two approximate dynamic programming methods to optimize the distribution operations of a company manufacturing a certain product at multiple production plants and shipping it to different customer locations for sale. We begin by formulating the problem as a dynamic program. Our first approximate dynamic programming method uses a linear approximation of the value function and computes the parameters of this approximation by using the linear programming representation of the dynamic program. Our second method relaxes the constraints that link the decisions for different production plants. Consequently, the dynamic program decomposes by the production plants. Computational experiments show that the proposed methods are computationally attractive, and in particular, the second method performs significantly better than standard benchmarks. © 2006 Wiley Periodicals, Inc. Naval Research Logistics, 2006