Machine maintenance with workload considerations

Machine maintenance is modeled in the setting of a single‐server queue. Machine deterioration corresponds to slower service rates and failure. This leads to higher congestion and an increase in customer holding costs. The decision‐maker decides when to perform maintenance, which may be done pre‐emptively; before catastrophic failures. Similar to classic maintenance control models, the information available to the decision‐maker includes the state of the server. Unlike classic models, the information also includes the number of customers in queue. Considered are both a repair model and a replacement model. In the repair model, with random replacement times, fixed costs are assumed to be constant in the server state. In the replacement model, both constant and variable fixed costs are considered. It is shown in general that the optimal maintenance policies have switching curve structure that is monotone in the server state. However, the switching curve policies for the repair model are not always monotone in the number of customers in the queue. Numerical examples and two heuristics are also presented. © 2007 Wiley Periodicals, Inc. Naval Research Logistics, 2007     

Requirements planning for modular products

The focus of this paper is on determining the requirements of different component options of a modular end‐product in an uncertain environment. We explicitly model two distinct sources of uncertainty: stochastic end‐product demand and unknown market proportions for the different product options available. Our cost minimizing model focuses on determining the optimal requirements policies for component options that meet a pre‐set service level. We show that simple common‐sense requirements policies are not generally optimal; there is a non‐linear connection between service level and component requirements that is hard to characterize without a detailed analysis. © 2006 Wiley Periodicals, Inc. Naval Research Logistics, 2006     

On parallel machine replacement problems with general replacement cost functions and stochastic deterioration

The parallel machine replacement problem consists of finding a minimum cost replacement policy for a finite population of economically interdependent machines. In this paper, we formulate a stochastic version of the problem and analyze the structure of optimal policies under general classes of replacement cost functions. We prove that for problems with arbitrary cost functions, there can be optimal policies where a machine is replaced only if all machines in worse states are replaced (Worse Cluster Replacement Rule). We then show that, for problems with replacement cost functions exhibiting nonincreasing marginal costs, there are optimal policies such that, in any stage, machines in the same state are either all kept or all replaced (No‐Splitting Rule). We also present an example that shows that economies of scale in replacement costs do not guarantee optimal policies that satisfy the No‐Splitting Rule. These results lead to the fundamental insight that replacement decisions are driven by marginal costs, and not by economies of scale as suggested in the literature. Finally, we describe how the optimal policy structure, i.e., the No‐Splitting and Worse Cluster Replacement Rules, can be used to reduce the computational effort required to obtain optimal replacement policies. © 2005 Wiley Periodicals, Inc. Naval Research Logistics, 2005     

Age replacement policies in two time scales

We develop and estimate optimal age replacement policies for devices whose age is measured in two time scales. For example, the age of a jet engine can be measured in the number of flight hours and the number of landings. Under a single‐scale age replacement policy, a device is replaced at age τ or upon failure, whichever occurs first. We show that a natural generalization to two scales is to replace nonfailed devices when their usage path crosses the boundary of a two‐dimensional region M, where M is a lower set with respect to the matrix partial order. For lifetimes measured in two scales, we consider devices that age along linear usage paths. We generalize the single‐scale long‐run average cost, estimate optimal two‐scale policies, and give an example. We note that these policies are strongly consistent estimators of the true optimal policies under mild conditions, and study small‐sample behavior using simulation. © 2003 Wiley Periodicals, Inc. Naval Research Logistics 50: 592–613, 2003.     

Warranty reserves for nonstationary sales processes

Estimation of warranty costs, in the event of product failure within the warranty period, is of importance to the manufacturer. Costs associated with replacement or repair of the product are usually drawn from a warranty reserve fund created by the manufacturer. Considering a stochastic sales process, first and second moments (and thereby the variance) are derived for the manufacturer's total discounted warranty cost of a single sale for single‐component items under four different warranty policies from a manufacturer's point of view. These servicing strategies represent a renewable free‐replacement, nonrenewable free‐replacement, renewable pro‐rata, and a nonrenewable minimal‐repair warranty plans. The results are extended to determine the mean and variance of total discounted warranty costs for the total sales over the life cycle of the product. Furthermore, using a normal approximation, warranty reserves necessary for a certain protection level, so that reserves are not completely depleted, are found. Results and their managerial implications are studied through an extensive example. © 2002 Wiley Periodicals, Inc. Naval Research Logistics 49: 499–513, 2002; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/nav.10023     

A branch and bound algorithm for computing optimal replacement policies in consecutive k‐out‐of‐n‐systems

This paper presents a branch and bound algorithm for computing optimal replacement policies in a discrete‐time, infinite‐horizon, dynamic programming model of a binary coherent system with n statistically independent components, and then specializes the algorithm to consecutive k‐out‐of‐n systems. The objective is to minimize the long‐run expected average undiscounted cost per period. (Costs arise when the system fails and when failed components are replaced.) An earlier paper established the optimality of following a critical component policy (CCP), i.e., a policy specified by a critical component set and the rule: Replace a component if and only if it is failed and in the critical component set. Computing an optimal CCP is a optimization problem with n binary variables and a nonlinear objective function. Our branch and bound algorithm for solving this problem has memory storage requirement O(n) for consecutive k‐out‐of‐n systems. Extensive computational experiments on such systems involving over 350,000 test problems with n ranging from 10 to 150 find this algorithm to be effective when n ≤ 40 or k is near n. © 2002 Wiley Periodicals, Inc. Naval Research Logistics 49: 288–302, 2002; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/nav.10017     

A cost-benefit analysis of military aircraft replacement policies

This paper describes a method of solving aircraft service life problems. The particular application concerns aircraft in the Naval Advanced Jet Training Command. The method of solution is comparative present value analysis of alternative replacement policies. The likely risks of estimation errors are reflected in the comparisons of present values. Differences are noted in the benefits associated with each policy, but external to Naval Aviation. Since the values of these benefits can be determined only at a higher level of decision-making, the result of the study is not a conclusive selection among policies, but a schedule of present values on the basis of which, together with values of the external benefits, a decision can be reached. This paper discusses replacement policies for aircraft used in the Naval Advanced Jet Pilot Training mission. Taking engineering technology and the training syllabus as given, four feasible plans for introducing replacement aircraft into service are evaluated in terms of the present values of differential costs associated with the plans and in terms of the likely errors in cost estimates used in calculation of the present values. The trade-off between present value of costs and planning flexibility is emphasized in choosing a recommended time pattern of aircraft replacement. The specific aircraft mixes considered are the TF–9J/TAF–9J and the TA–4F/A–4B. The first is the currently employed mix; the second is the proposed replacement. The problem is to select an optimal time-pattern of replacement of F–9's by A–4's, given technological differences favoring the A–4 and increasing costs of maintaining squadrons of F–9's. Replacements by aircraft types other than the A–4 are considered impractical. Four feasible plans for introducing A–4's through a 5-year period are evaluated in terms of current best estimates of the related costs of the plans and in terms of the flexibility of modifying each plan given future better information concerning the relevant costs. The method of analysis is comparative present value of expected costs.     

Optimal and asymptotically optimal policies for assemble‐to‐order n‐ and W‐systems

We consider two specially structured assemble‐to‐order (ATO) systems—the N‐ and W‐systems—under continuous review, stochastic demand, and nonidentical component replenishment leadtimes. Using a hybrid approach that combines sample‐path analysis, linear programming, and the tower property of conditional expectation, we characterize the optimal component replenishment policy and common‐component allocation rule, present comparative statics of the optimal policy parameters, and show that some commonly used heuristic policies can lead to significant optimality loss. The optimality results require certain symmetry in the cost parameters. In the absence of this symmetry, we show that, for systems with high demand volume, the asymptotically optimal policy has essentially the same structure; otherwise, the optimal policies have no clear structure. For these latter systems, we develop heuristic policies and show their effectiveness. © 2016 Wiley Periodicals, Inc. Naval Research Logistics 62: 617–645, 2015     

Optimal maintenance policies for serial,multi‐machine systems with non‐instantaneous repairs

We study optimal age‐replacement policies for machines in series with non‐instantaneous repair times by formulating two nonlinear programs: one that minimizes total cost‐rate subject to a steady‐state throughput requirement and another that maximizes steady‐state throughput subject to a cost‐rate budget constraint. Under reasonable assumptions, the single‐machine cost‐optimal and throughput‐optimal solutions are unique and orderable, and the multi‐machine optimal solutions have appealing structure. Furthermore, we establish equivalence between the two formulations and provide an illustrative numerical example. © 2006 Wiley Periodicals, Inc. Naval Research Logistics, 2006     

A bivariate optimal replacement policy for a cold standby repairable system with repair priority

In this article, an optimal replacement policy for a cold standby repairable system consisting of two dissimilar components with repair priority is studied. Assume that both Components 1 and 2, after repair, are not as good as new, and the main component (Component 1) has repair priority. Both the sequence of working times and that of the components'repair times are generated by geometric processes. We consider a bivariate replacement policy (T,N) in which the system is replaced when either cumulative working time of Component 1 reaches T, or the number of failures of Component 1 reaches N, whichever occurs first. The problem is to determine the optimal replacement policy (T,N)* such that the long run average loss per unit time (or simply the average loss rate) of the system is minimized. An explicit expression of this rate is derived, and then optimal policy (T,N)* can be numerically determined through a two‐dimensional‐search procedure. A numerical example is given to illustrate the model's applicability and procedure, and to illustrate some properties of the optimal solution. We also show that if replacements are made solely on the basis of the number of failures N, or solely on the basis of the cumulative working time T, the former class of policies performs better than the latter, albeit only under some mild conditions. © 2010 Wiley Periodicals, Inc. Naval Research Logistics, 2010     

Optimal replacement of continuously degrading systems in partially observed environments

Motivated by wind energy applications, we consider the problem of optimally replacing a stochastically degrading component that resides and operates in a partially observable environment. The component's rate of degradation is modulated by the stochastic environment process, and the component fails when it is accumulated degradation first reaches a fixed threshold. Assuming periodic inspection of the component, the objective is to minimize the long‐run average cost per unit time of performing preventive and reactive replacements for two distinct cases. The first case examines instantaneous replacements and fixed costs, while the second considers time‐consuming replacements and revenue losses accrued during periods of unavailability. Formulated and solved are mixed state space, partially observable Markov decision process models, both of which reveal the optimality of environment‐dependent threshold policies with respect to the component's cumulative degradation level. Additionally, it is shown that for each degradation value, a threshold policy with respect to the environment belief state is optimal if the environment alternates between two states. The threshold policies are illustrated by way of numerical examples using both synthetic and real wind turbine data. © 2015 Wiley Periodicals, Inc. Naval Research Logistics 62: 395–415, 2015     

Technical note: Reexamination of all‐or‐none inspection policies in a supply chain with endogenous product quality

This note studies the optimal inspection policies in a supply chain in which a manufacturer purchases components from a supplier but has no direct control of component quality. The manufacturer uses an inspection policy and a damage cost sharing contract to encourage the supplier to improve the component quality. We find that all‐or‐none inspection policies are optimal for the manufacturer if the supplier's share of the damage cost is larger than a threshold; otherwise, the manufacturer should inspect a fraction of a batch. © 2008 Wiley Periodicals, Inc. Naval Research Logistics, 2008     

Bounding the optimal burn‐in time for a system with two types of failure

Burn‐in is a widely used method to improve the quality of products or systems after they have been produced. In this paper, we consider the problem of determining bounds to the optimal burn‐in time and optimal replacement policy maximizing the steady state availability of a repairable system. It is assumed that two types of system failures may occur: One is Type I failure (minor failure), which can be removed by a minimal repair, and the other is Type II failure (catastrophic failure), which can be removed only by a complete repair. Assuming that the underlying lifetime distribution of the system has a bathtub‐shaped failure rate function, upper and lower bounds for the optimal burn‐in time are provided. Furthermore, some other applications of optimal burn‐in are also considered. © 2004 Wiley Periodicals, Inc. Naval Research Logistics, 2004     

Optimal FCFS allocation rules for periodic‐review assemble‐to‐order systems

In Assemble‐To‐Order (ATO) systems, situations may arise in which customer demand must be backlogged due to a shortage of some components, leaving available stock of other components unused. Such unused component stock is called remnant stock. Remnant stock is a consequence of both component ordering decisions and decisions regarding allocation of components to end‐product demand. In this article, we examine periodic‐review ATO systems under linear holding and backlogging costs with a component installation stock policy and a First‐Come‐First‐Served (FCFS) allocation policy. We show that the FCFS allocation policy decouples the problem of optimal component allocation over time into deterministic period‐by‐period optimal component allocation problems. We denote the optimal allocation of components to end‐product demand as multimatching. We solve the multi‐matching problem by an iterative algorithm. In addition, an approximation scheme for the joint replenishment and allocation optimization problem with both upper and lower bounds is proposed. Numerical experiments for base‐stock component replenishment policies show that under optimal base‐stock policies and optimal allocation, remnant stock holding costs must be taken into account. Finally, joint optimization incorporating optimal FCFS component allocation is valuable because it provides a benchmark against which heuristic methods can be compared. © 2015 Wiley Periodicals, Inc. Naval Research Logistics 62: 158–169, 2015     

Cost analysis of warranty policies

This article analyzes two general warranty policies involving an initial free replacement period, followed by a pro rata period. We examine the short-run total costs and longrun average costs under these policies. Formulas for both consumer costs and manufacturer profits under warranty are derived. We also study the expected number of purchases over the product life cycle under both policies. Bounds for the expected total costs and expected number of purchases are obtained for the case where the failure distribution of the item is new better than used.     

The parallel replacement problem with demand and capital budgeting constraints

A generalized parallel replacement problem is considered with both fixed and variable replacement costs, capital budgeting, and demand constraints. The demand constraints specify that a number of assets, which may vary over time, are required each period over a finite horizon. A deterministic, integer programming formulation is presented as replacement decisions must be integer. However, the linear programming relaxation is shown to have integer extreme points if the economies of scale binary variables are fixed. This allows for the efficient computation of large parallel replacement problems as only a limited number of 0–1 variables are required. Examples are presented to provide insight into replacement rules, such as the “no‐splitting‐rule” from previous research, under various demand scenarios. © 2000 John Wiley & Sons, Inc. Naval Research Logistics 47: 40–56, 2000     

Bounds on optimal cost for a replacement problem with partial observations

This paper characterizes the structure of optimal strategies for a replacement problem for two special cases of observation quality. It is shown that when the state of the system is either completely observed or completely unobserved at every decision epoch by the controller, reasonable assumptions are sufficient for the existence of optimal replacement strategies composed of policies having a generalized, control-limit form. These structural results are of particular interest since the optimal cost functions for the two special cases represent bounds on the optimal cost function for the general partially observed case, significant computational simplification can result for the two special cases due to their optimal strategy structure, and optimal strategies possessing a control-limit structure do not necessarily exist for the general partially observed case.     

Repairable consecutive‐k‐out‐of‐n: F system with Markov dependence

In this article, a model for a repairable consecutive‐k‐out‐of‐n: F system with Markov dependence is studied. A binary vector is used to represent the system state. The failure rate of a component in the system depends on the state of the preceding component. The failure risk of a system state is then introduced. On the basis of the failure risk, a priority repair rule is adopted. Then the transition density matrix can be determined, and the analysis of the system reliability can be conducted accordingly. One example each of a linear and a circular system is then studied in detail to explain the model and methodology developed in this paper. © 2000 John Wiley & Sons, Inc. Naval Research Logistics 47: 18–39, 2000     

Parametric inference for component distributions from lifetimes of systems with dependent components

In system reliability analysis, for an n ‐component system, the estimation of the performance of the components in the system is not straightforward in practice, especially when the components are dependent. Here, by assuming the n components in the system to be identically distributed with a common distribution belonging to a scale‐family and the dependence structure between the components being known, we discuss the estimation of the lifetime distributions of the components in the system based on the lifetimes of systems with the same structure. We develop a general framework for inference on the scale parameter of the component lifetime distribution. Specifically, the method of moments estimator (MME) and the maximum likelihood estimator (MLE) are derived for the scale parameter, and the conditions for the existence of the MLE are also discussed. The asymptotic confidence intervals for the scale parameter are also developed based on the MME and the MLE. General simulation procedures for the system lifetime under this model are described. Finally, some examples of two‐ and three‐component systems are presented to illustrate all the inferential procedures developed here. © 2012 Wiley Periodicals, Inc. Naval Research Logistics, 2012     

Return policy: Hassle‐free or your money‐back guarantee?

This article compares the profitability of two pervasively adopted return policies—money‐back guarantee and hassle‐free policies. In our model, a seller sells to consumers with heterogeneous valuations and hassle costs. Products are subject to quality risk, and product misfit can only be observed post‐purchase. While the hassle‐free policy is cost advantageous from the seller's viewpoint, a money‐back guarantee allows the seller to fine‐tune the consumer hassle on returning the product. Thus, when the two return policies lead to the same consumer behaviors, the hassle‐free policy dominates. Conversely, a money‐back guarantee can be more profitable even if on average, high‐valuation consumers experience a lower hassle cost than the low‐valuation ones. The optimal hassle cost can be higher when product quality gets improved; thus, it is not necessarily a perfect proxy or signal of the seller's quality. We further allow the seller to adopt a mixture of these policies, and identify the concrete operating regimes within which these return policies are optimal among more flexible policies. © 2014 Wiley Periodicals, Inc. Naval Research Logistics 61: 403–417, 2014