Instant transportation solutions

This paper presents direct noniterative methods for solving such known problems as shoploading and aggregate scheduling. There is given a simple optimal rule for the shop-loading problem which is quite surprising. The crucial point in solving this problem is what not to assign rather than what to assign. The development of those methods was possible since the discussed problems can be converted into a special transportation model where the given cost coefficients c_ij assume a form cij = ui + uj.     

On a sequential rule for estimating the location parameter of an exponential distribution

Let us assume that observations are obtained at random and sequentially from a population with density function In this paper we consider a sequential rule for estimating μ when σ is unknown corresponding to the following class of cost functions In this paper we consider a sequential rule for estimating μ when σ is unknown corresponding to the following class of cost functions Where δ(X_I,…,X_N) is a suitable estimator of μ based on the random sample (X₁,…, X_N), N is a stopping variable, and A and p are given constants. To study the performance of the rule it is compared with corresponding “optimum fixed sample procedures” with known σ by comparing expected sample sizes and expected costs. It is shown that the rule is “asymptotically efficient” when absolute loss (p=-1) is used whereas the one based on squared error (p = 2) is not. A table is provided to show that in small samples similar conclusions are also true.     

Scheduling maintenance and semiresumable jobs on a single machine

The majority of scheduling literature assumes that the machines are available at all times. In this paper, we study single machine scheduling problems where the machine maintenance must be performed within certain intervals and hence the machine is not available during the maintenance periods. We also assume that if a job is not processed to completion before the machine is stopped for maintenance, an additional setup is necessary when the processing is resumed. Our purpose is to schedule the maintenance and jobs to minimize some performance measures. The objective functions that we consider are minimizing the total weighted job completion times and minimizing the maximum lateness. In both cases, maintenance must be performed within a fixed period T, and the time for the maintenance is a decision variable. In this paper, we study two scenarios concerning the planning horizon. First, we show that, when the planning horizon is long in relation to T, the problem with either objective function is NP-complete, and we present pseudopolynomial time dynamic programming algorithms for both objective functions. In the second scenario, the planning horizon is short in relation to T. However, part of the period T may have elapsed before we schedule any jobs in this planning horizon, and the remaining time before the maintenance is shorter than the current planning horizon. Hence we must schedule one maintenance in this planning horizon. We show that the problem of minimizing the total weighted completion times in this scenario is NP-complete, while the shortest processing time (SPT) rule and the earliest due date (EDD) rule are optimal for the total completion time problem and the maximum lateness problem respectively. © 1999 John Wiley & Sons, Inc. Naval Research Logistics 46: 845–863, 1999     

Scheduling with earliest start and due date constraints

We consider the scheduling of n tasks on a single resource. Each task becomes available for processing at time a_i, must be completed by time b_i, and requires d_i time units for processing. The aim is to find a schedule that minimizes the elapsed time to complete all jobs. We present solution algorithms for this problem when job splitting is permitted and when job splitting is not permitted. Then we consider several scheduling situations which arise in practice where these models may apply.     

Scheduling with earliest start and due date constraints on multiple machines

We consider the scheduling of n jobs on m identical machines when the jobs become available for processing at ready times a_i, a_i, ? 0, require d_i time units for processing and must be completed by times b_i for i = 1, 2, … n. The objective chosen is that of minimizing the total elapsed time to complete all jobs subject to the ready time and due date constraints, preemption is not allowed. We present a multi-stage solution algorithm for this problem that is based on an implicit enumeration procedure and also uses the labelling type algorithm which solves the problem when preemption is allowed.     

Deterministic and stochastic scheduling with teamwork tasks

We study a class of new scheduling problems which involve types of teamwork tasks. Each teamwork task consists of several components, and requires a team of processors to complete, with each team member to process a particular component of the task. Once the processor completes its work on the task, it will be available immediately to work on the next task regardless of whether the other components of the last task have been completed or not. Thus, the processors in a team neither have to start, nor have to finish, at the same time as they process a task. A task is completed only when all of its components have been processed. The problem is to find an optimal schedule to process all tasks, under a given objective measure. We consider both deterministic and stochastic models. For the deterministic model, we find that the optimal schedule exhibits the pattern that all processors must adopt the same sequence to process the tasks, even under a general objective function GC = F(f₁(C₁), f₂(C₂), … , f_n(C_n)), where f_i(C_i) is a general, nondecreasing function of the completion time C_i of task i. We show that the optimal sequence to minimize the maximum cost MC = max f_i(C_i) can be derived by a simple rule if there exists an order f₁(t) ≤ … ≤ f_n(t) for all t between the functions {f_i(t)}. We further show that the optimal sequence to minimize the total cost TC = ∑ f_i(C_i) can be constructed by a dynamic programming algorithm. For the stochastic model, we study three optimization criteria: (A) almost sure minimization; (B) stochastic ordering; and (C) expected cost minimization. For criterion (A), we show that the results for the corresponding deterministic model can be easily generalized. However, stochastic problems with criteria (B) and (C) become quite difficult. Conditions under which the optimal solutions can be found for these two criteria are derived. © 2004 Wiley Periodicals, Inc. Naval Research Logistics, 2004     

Parallel machine scheduling with eligibility constraints: A composite dispatching rule to minimize total weighted tardiness

We study a parallel machine scheduling problem, where a job j can only be processed on a specific subset of machines M_j, and the M_j subsets of the n jobs are nested. We develop a two‐phase heuristic for minimizing the total weighted tardiness subject to the machine eligibility constraints. In the first phase, we compute the factors and statistics that characterize a problem instance. In the second phase, we propose a new composite dispatching rule, the Apparent Tardiness Cost with Flexibility considerations (ATCF) rule, which is governed by several scaling parameters of which the values are determined by the factors obtained in the first phase. The ATCF rule is a generalization of the well‐known ATC rule which is very widely used in practice. We further discuss how to improve the dispatching rule using some simple but powerful properties without requiring additional computation time, and the improvement is quite satisfactory. We apply the Sequential Uniform Design Method to design our experiments and conduct an extensive computational study, and we perform tests on the performance of the ATCF rule using a real data set from a large hospital in China. We further compare its performance with that of the classical ATC rule. We also compare the schedules improved by the ATCF rule with what we believe are Near Optimal schedules generated by a general search procedure. The computational results show that especially with a low due date tightness, the ATCF rule performs significantly better than the well‐known ATC rule generating much improved schedules that are close to the Near Optimal schedules. © 2017 Wiley Periodicals, Inc. Naval Research Logistics 64: 249–267, 2017     

Stochastic control of queueing systems

Suppose that the state of a queueing system is described by a Markov process { Y_t, t ≥ 0}, and the profit from operating it up to a time t is given by the function f(Y_t). We operate the system up to a time T, where the random variable T is a stopping time for the process Yt. Optimal stochastic control is achieved by choosing the stopping time T that maximizes Ef(Y_T) over a given class of stopping times. In this paper a theory of stochastic control is developed for a single server queue with Poisson arrivals and general service times.     

Scheduling data transmission under an {si; o} policy

This paper discusses scheduling of data transmission when data can only be transmitted in one direction at a time. A common policy used is the so-called alternating priority policy. In this paper we select a more general class of policies named the {S_i; O} policy. We show how to determine the optimal parameters of the {S_i; O} policy for given system parameters. We also give a simple example to show that {S_i; O} policy is, in fact, better then alternating priority policy.     

A single-machine scheduling problem with random processing times

We consider the problem of scheduling n jobs with random processing times on a single machine in order to minimize the expected variance of the completion times. We prove a number of results, including one to the effect that the optimal schedule must be V shaped when the jobs have identical means or variances or have exponential processing times.     

Multiple-attribute decision making with partial information: The comparative hypervolume criterion

A new approach is presented for analyzing multiple-attribute decision problems in which the set of actions is finite and the utility function is additive. The problem can be resolved if the decision makers (or group of decision makers) specifies a set of nonnegative weights for the various attributes or criteria, but we here assume that the decision maker(s) cannot provide a numerical value for each such weight. Ordinal information about these weights is therefore obtained from the decision maker(s), and this information is translated into a set of linear constraints which restrict the values of the weights. These constraints are then used to construct a polytope W of feasible weight vectors, and the subsets H_i (polytopes) of W over which each action a_i has the greatest utility are determined. With the Comparative Hypervolume Criterion we calculate for each action the ratio of the hypervolume of H_i to the hypervolume of W and suggest the choice of an action with the largest such ratio. Justification of this choice criterion is given, and a computational method for accurately approximating the hypervolume ratios is described. A simple example is provided to evaluate the efficiency of a computer code developed to implement the method.     

Optimal pricing and scheduling control of product shipping

In this article, we seek to understand how a capacity‐constrained seller optimally prices and schedules product shipping to customers who are heterogeneous on willingness to pay (WTP) and willingness to wait (WTW). The capacity‐constrained seller does not observe each customer's WTP and WTW and knows only the aggregate distributions of WTP and WTW. The seller's problem is modeled as an M/M/N_s queueing model with multiclass customers and multidimensional information screening. We contribute to the literature by providing an optimal and efficient algorithm. Furthermore, we numerically find that customers with a larger waiting cost enjoys a higher scheduling priority, but customers with higher valuation do not necessarily get a higher scheduling priority. © 2015 Wiley Periodicals, Inc. Naval Research Logistics 62: 215–227, 2015     

Mathematical aspects of the 3 × n job-shop sequencing problem

The paper discusses mathematical properties of the well-known Bellman-Johnson 3 × n sequencing problem. Optimal rules for some special cases are developed. For the case min B_i ≥ maxA_j we find an optimal sequence of the 2 × n problem for machines B and C and move one item to the front of the sequence to minimize (7); when min B_i ≥ max C_j we solve a 2 × n problem for machines A and B and move one item to the end of the optimal sequence so as to minimize (9). There is also given a sufficient optimality condition for a solution obtained by Johnson's approximate method. This explains why this method so often produces an optimal solution.     

Some limiting distributions associated with sequences of multinomial trials

A series of independent trials is considered in which one of k ≥ 2 mutually exclusive and exhaustive outcomes occurs at each trial. The series terminates when m outcomes of any one type have occurred. The limiting distribution (as m → ∞) of the number of trials performed until termination is found with particular attention to the situation where a Dirichlet distribution is assigned to the k vector of probabilities for each outcome. Applications to series of races involving k runners and to spares problems in reliability modeling are discussed. The problem of selecting a stopping rule so that the probability of the series terminating on outcome i is k^?1 (i.e., a “fair” competition) is also studied. Two generalizations of the original asymptotic problem are addressed.     

Flowshop/no-idle or no-wait scheduling to minimize the sum of completion times

This paper deals with flowshop/sum of completion times scheduling problems, working under a “no-idle” or a “no-wait” constraint, the former prescribes for the machines to work continuously without idle intervals and the latter for the jobs to be processed continuously without waiting times between consecutive machines. Under either of the constraints the problem is unary NP-Complete for two machines. We prove some properties of the optimal schedule for n/2/F, no-idle/σC_i. For n/m/P, no-idle/σC_i, and n/m/P, no-wait/σC_i, with an increasing or decreasing series of dominating machines, we prove theorems that are the basis for polynomial bounded algorithms. All theorems are demonstrated numerically.     

Scheduling a maintenance activity on parallel identical machines

We study a problem of scheduling a maintenance activity on parallel identical machines, under the assumption that all the machines must be maintained simultaneously. One example for this setting is a situation where the entire system must be stopped for maintenance because of a required electricity shut‐down. The objective is minimum flow‐time. The problem is shown to be NP‐hard, and moreover impossible to approximate unless P = NP. We introduce a pseudo‐polynomial dynamic programming algorithm, and show how to convert it into a bicriteria FPTAS for this problem. We also present an efficient heuristic and a lower bound. Our numerical tests indicate that the heuristic provides in most cases very close‐to‐optimal schedules. © 2008 Wiley Periodicals, Inc. Naval Research Logistics 2009     

Basic scheduling problems with raw material constraints

One of the achievements of scheduling theory is its contribution to practical applications in industrial settings. In particular, taking finiteness of the available production capacity explicitly into account, has been a major improvement of standard practice. Availability of raw materials, however, which is another important constraint in practice, has been largely disregarded in scheduling theory. This paper considers basic models for scheduling problems in contemporary manufacturing settings where raw material availability is of critical importance. We explore single scheduling machine problems, mostly with unit or all equal processing times, and L_max and C_max objectives. We present polynomial time algorithms, complexity and approximation results, and computational experiments. © 2005 Wiley Periodicals, Inc. Naval Research Logistics, 2005.     

Search and the introduction of improved technologies

Modeling R&D as standard sequential search, we consider a monopolist who can implement a sequence of technological discoveries during the technology search process: he earns revenue on his installed technology while he engages in R&D to find improved technology. What is not standard is that he has a finite number of opportunities to introduce improved technology. We show that his optimal policy is characterized by thresholds ξ_i(x): introduce the newly found technology if and only if it exceeds ξ_i(x) when x is the state of the currently installed technology and i is the number of remaining introductions allowed. We also analyze a nonstationary learning‐by‐doing model in which the monopolist's experience in implementing new technologies imparts increased capability in generating new technologies. Because this nonstationary model is not in the class of monotone stopping problems, a number of surprising results hold and several seemingly obvious properties of the stationary model no longer hold. © 2011 Wiley Periodicals, Inc. Naval Research Logistics, 2011     

An optimum t-test for the scale parameter of an extreme-value distribution

A Student's t-test proposed by Ogawa is considered for the hypothesis Ho: σ=σo against the alternative hypothesis H₁: σ ≠ σo, where σ is the scale parameter of the Extremevalue distribution of smallest values with known location parameter μ. The test is based on a few sample quantiles chosen from a large sample so as to give asymptotically maximum power to the test when the number of sample quantiles is fixed. A table which facilitates the computation of the test statistic is given. Several schemes for determining the ranks of the sample quantiles by the optimal spacings are compared and the effect of the bias of the estimate of σ on the test is investigated through a Monte Carlo study.     

A note on randomly evolving hazard rate functions

Let τ be a finite stopping time with random hazard rate function (λ_t:t ≥ 0). We prove that στ λ_t dt is exponentially distributed with mean 1.