Determination of burn‐in parameters and residual life for highly reliable products

Today, many products are designed and manufactured to function for a long period of time before they fail. Determining product reliability is a great challenge to manufacturers of highly reliable products with only a relatively short period of time available for internal life testing. In particular, it may be difficult to determine optimal burn‐in parameters and characterize the residual life distribution. A promising alternative is to use data on a quality characteristic (QC) whose degradation over time can be related to product failure. Typically, product failure corresponds to the first passage time of the degradation path beyond a critical value. If degradation paths can be modeled properly, one can predict failure time and determine the life distribution without actually observing failures. In this paper, we first use a Wiener process to describe the continuous degradation path of the quality characteristic of the product. A Wiener process allows nonconstant variance and nonzero correlation among data collected at different time points. We propose a decision rule for classifying a unit as normal or weak, and give an economic model for determining the optimal termination time and other parameters of a burn‐in test. Next, we propose a method for assessing the product's lifetime distribution of the passed units. The proposed methodologies are all based only on the product's initial observed degradation data. Finally, an example of an electronic product, namely contact image scanner (CIS), is used to illustrate the proposed procedure. © 2002 Wiley Periodicals, Inc. Naval Research Logistics, 2003     

Timely exposure of a secret project: Which activities to monitor?

A defender wants to detect as quickly as possible whether some attacker is secretly conducting a project that could harm the defender. Security services, for example, need to expose a terrorist plot in time to prevent it. The attacker, in turn, schedules his activities so as to remain undiscovered as long as possible. One pressing question for the defender is: which of the project's activities to focus intelligence efforts on? We model the situation as a zero‐sum game, establish that a late‐start schedule defines a dominant attacker strategy, and describe a dynamic program that yields a Nash equilibrium for the zero‐sum game. Through an innovative use of cooperative game theory, we measure the harm reduction thanks to each activity's intelligence effort, obtain insight into what makes intelligence effort more effective, and show how to identify opportunities for further harm reduction. We use a detailed example of a nuclear weapons development project to demonstrate how a careful trade‐off between time and ease of detection can reduce the harm significantly.     

FP GA软件测试过程及管理

船舶领域的FPGA软件测试严重滞后于应用增长的速度,部分型号甚至未将其纳入测试范畴。在研制过程中,由FPGA故障导致的修改调试已成为影响进度和增加成本的瓶颈。因此,针对FGPA软件特点及其测试的现状,对其测试过程、测试模型和过程管理进行研究,并给出完整的过程管理体系。通过采用规范化、有序化、系统化、面向工程的、面向任务的文档及配套管理手段进行正确引导、组织和实施测试活动,持续改进测试流程中各个阶段工作质量和效用,及早及时地发现和关闭开发过程中存在的缺陷,提高设计和测试的沟通效率,最终保证FPGA产品的质量,提升客户的满意度。     

改进遗传算法在防空武器目标分配中的应用研究

针对传统方法在防空武器目标分配时仅考虑双方态势优势的问题，建立了基于综合射击优势和目标威胁度的武器目标分配数学模型，并使用改进遗传算法对该模型进行了求解。该算法相比传统遗传算法主要进行了以下改进：采用排队选择和轮盘赌选择结合的选择方法，采用子代个体部分替换或不替换双亲的方法，采用了自适应变异概率等。并在Matlab环境下进行了仿真，且和传统算法进行了对比，仿真结果证明该算法改进合理，对地面防空火力分配决策研究具有一定的参考价值。     

The value statement

Frequently there exists an insufficient amount of actual data upon which to base a decision. In this paper a method is presented whereby the subjective opinions of a group of qualified persons are utilized to quantify the relative importance of a finite number of parameters or objectives. A means of testing the consistency among the judges is given which allows the decision maker to determine the validity of the opinions gathered. The application presented here is in the area of Multiple Incentive Contracting. Namely, a method is proposed to facilitate the answering of the question, “What is the value to the purchaser of an incremental change in the performance of a system?” Such a vehicle is not essential to the methodology proposed.     

Dynamic inventory control with limited capital and short‐term financing

For most firms, especially the small‐ and medium‐sized ones, the operational decisions are affected by their internal capital and ability to obtain external capital. However, the majority of the literature on dynamic inventory control ignores the firm's financial status and financing issues. An important question that arises is: what are the optimal inventory and financing policies for firms with limited internal capital and limited access to external capital? In this article, we study a dynamic inventory control problem where a capital‐constrained firm periodically purchases a product from a supplier and sells it to a market with random demands. In each period, the firm can use its own capital and/or borrow a short‐term loan to purchase the product, with the interest rate being nondecreasing in the loan size. The objective is to maximize the firm's expected terminal wealth at the end of the planning horizon. We show that the optimal inventory policy in each period is an equity‐level‐dependent base‐stock policy, where the equity level is the sum of the firm's capital level and the value of its on‐hand inventory evaluated at the purchasing cost; and the structure of the optimal policy can be characterized by four intervals of the equity level. Our results shed light on the dynamic inventory control for firms with limited capital and short‐term financing capabilities.Copyright © 2014 Wiley Periodicals, Inc. Naval Research Logistics 61: 184–201, 2014     

A model for geographically distributed combat interactions of swarming naval and air forces

This article describes the Distributed Interaction Campaign Model (DICM), an exploratory campaign analysis tool and asset allocation decision‐aid for managing geographically distributed and swarming naval and air forces. The model is capable of fast operation, while accounting for uncertainty in an opponent's plan. It is intended for use by commanders and analysts who have limited time for model runs, or a finite budget. The model is purpose‐built for the Pentagon's Office of Net Assessment, and supports analysis of the following questions: What happens when swarms of geographically distributed naval and air forces engage each other and what are the key elements of the opponents’ force to attack? Are there changes to force structure that make a force more effective, and what impacts will disruptions in enemy command and control and wide‐area surveillance have? Which insights are to be gained by fast exploratory mathematical/computational campaign analysis to augment and replace expensive and time‐consuming simulations? An illustrative example of model use is described in a simple test scenario. © 2016 Wiley Periodicals, Inc. Naval Research Logistics 63: 562–576, 2016     

基于改进Markov模型软件测试策略

针对已有软件测试Markov模型与工程实践不符的情况，通过引入软件需求覆盖率改进Markov模型。在改进的Markov模型基础上，本文以软件测试过程中测试总代价最小为控制目标，采用交叉熵方法修正测试剖面，由优化测试剖面生成测试用例序列。仿真结果表明这种方法能够有效地降低软件测试总代价，是一种有效的软件测试方法。     

Reliability growth of repairable systems

This paper considers the problem of modeling the reliability of a repairable system or device that is experiencing reliability improvement. Such a situation arises when system failure modes are gradually being corrected by a test-fix-test-fix procedure, which may include design changes. A dynamic reliability model for this process is discussed and statistical techniques are derived for estimating the model parameters and for testing the goodness-of-fit to observed data. The reliability model analyzed was first proposed as a graphical technique known as Duane plots, but can also be viewed as a nonhomogeneous Poisson process with a particular mean value function.     

Statistical equivalency and optimality of simple step‐stress accelerated test plans for the exponential distribution

Accelerated life testing (ALT) is commonly used to obtain reliability information about a product in a timely manner. Several stress loading designs have been proposed and recent research interests have emerged concerning the development of equivalent ALT plans. Step‐stress ALT (SSALT) is one of the most commonly used stress loadings because it usually shortens the test duration and reduces the number of required test units. This article considers two fundamental questions when designing a SSALT and provides formal proofs in answer to each. Namely: (1) can a simple SSALT be designed so that it is equivalent to other stress loading designs? (2) when optimizing a multilevel SSALT, does it degenerate to a simple SSALT plan? The answers to both queries, under certain reasonable model assumptions, are shown to be a qualified YES. In addition, we provide an argument to support the rationale of a common practice in designing a SSALT, that is, setting the higher stress level as high as possible in a SSALT plan. © 2012 Wiley Periodicals, Inc. Naval Research Logistics, 2013     

Evergreening and operational risk under price competition

“Evergreening” is a strategy wherein an innovative pharmaceutical firm introduces an upgrade of its current product when the patent on this product expires. The upgrade is introduced with a new patent and is designed to counter competition from generic manufacturers that seek to imitate the firm's existing product. However, this process is fraught with uncertainty because the upgrade is subject to stringent guidelines and faces approval risk. Thus, an incumbent firm has to make an upfront production capacity investment without clarity on whether the upgrade will reach the market. This uncertainty may also affect the capacity investment of a competing manufacturer who introduces a generic version of the incumbent's existing product but whose market demand depends on the success or failure of the upgrade. We analyze a game where capacity investment occurs before uncertainty resolution and firms compete on prices thereafter. Capacity considerations that arise due to demand uncertainty introduce new factors into the evergreening decision. Equilibrium analysis reveals that the upgrade's estimated approval probability needs to exceed a threshold for the incumbent to invest in evergreening. This threshold for evergreening increases as the intensity of competition in the generic market increases. If evergreening is optimal, the incumbent's capacity investment is either decreasing or nonmonotonic with respect to low end market competition depending on whether the level of product improvement in the upgrade is low or high. If the entrant faces a capacity constraint, then the probability threshold for evergreening is higher than the case where the entrant is not capacity constrained. Finally, by incorporating the risk‐return trade‐off that the incumbent faces in terms of the level of product improvement versus the upgrade success probability, we can characterize policy for a regulator. We show that the introduction of capacity considerations may maximize market coverage and/or social surplus at incremental levels of product improvement in the upgrade. This is contrary to the prevalent view of regulators who seek to curtail evergreening involving incremental product improvement. © 2016 Wiley Periodicals, Inc. Naval Research Logistics 63: 71–89, 2016     

Optimal design of accelerated life testing plans for periodical replacement with penalty

Accelerated life testing (ALT), enhanced by optimal test plans, has been widely accepted in practice as a quick approach for estimating the reliability of a product. From the estimation result, preventive maintenance schedules can be determined to ensure the performance of the product under its normal operating conditions. By default, maintenance decision‐making is regarded as the last and least rewarding step. However, sometimes the maintenance schedules, such as preventive maintenance intervals, are predetermined due to customer concerns and/or by various mandatory regulations and rules. Under such circumstances, how to accurately estimate the expenditure (e.g., on maintenance or spare parts management) associated with these maintenance requirements becomes an important issue. A viable solution is to incorporate the maintenance requirements into ALT plans. This paper provides an approach for the optimal design of ALT plans oriented by a mandatory periodical replacement schedule subject to a discounted penalty. The objective is to improve the estimation accuracy of the economic impact of this maintenance requirement. A numerical experiment is provided to demonstrate the approach in practical use. © 2008 Wiley Periodicals, Inc. Naval Research Logistics 2009     

软件测试的故障模型

故障模型是测试的基础,也是一个测试方法成熟的重要标志.软件的错误表现为2个方面:①计算结果错误;②系统"死机".导致第1类错误的故障相对来说是比较容易检测的.导致系统死机的故障其后果是严重的,这类故障由于一般其检测概率较小,也往往难以检测.死循环故障是最常见的能引起系统死机的故障,但这种故障由于其复杂性难以对其模型化,同时在许多情况下,死循环故障也比较容易暴露.对C 中几种能导致系统死机的典型故障进行了分析,这种故障的检测其意义重大,将这些典型的故障组合在一起,就构成了面向软件系统死机故障的故障模型.     

基于似然比检验的橡胶密封件加速试验机理一致性判别方法

加速退化试验广泛应用于橡胶密封件等长寿命产品的可靠性评估，试验过程中需要将高应力水平下的试验结果外推到正常应力水平。要获得准确的产品可靠性评估结果，需要保证加速应力下的退化失效机理与正常应力下的退化失效机理一致。基于似然比检验原理，提出加速退化试验机理一致性判别方法及流程。针对失效机理一致与失效机理变化两种场合，提出对数线性及非对数线性两类加速模型，并结合混合效应模型描述产品退化过程。利用似然比检验判断加速模型参数是否变化，完成失效机理一致性判别。仿真算例和应用实例表明，该方法能够有效判别橡胶密封件失效机理是否变化，并找到失效机理不变的应力水平边界。     

Israel’s Security Nexus as Strategic Restraint: The Case of Iran 2009–2013

This article examines the debates in Israel between 2009 and 2013 over Iran’s nuclear programme as a reflection of a particular type of civil–military or civil–security relationship. It analyses how key actors within that relationship – particularly those with an intelligence background – engaged with media outlets in Israel and further afield to influence domestic and international opinion over how best to contain Iran’s nuclear ambitions. In so doing, it seeks to address one fundamental question: are governments in Jerusalem any longer the final arbiters over deciding what is in the national security interests of the State of Israel?     

Comparison between constant‐stress and step‐stress accelerated life tests under Time Constraint

By running life tests at higher stress levels than normal operating conditions, accelerated life testing (ALT) quickly yields information on the lifetime distribution of a test unit. The lifetime at the design stress is then estimated through extrapolation using a regression model. In constant‐stress testing, a unit is tested at a fixed stress level until failure or the termination time point of test, whereas step‐stress testing allows the experimenter to gradually increase the stress levels at some prefixed time points during the test. In this work, the optimal k‐level constant‐stress and step‐stress ALTs are compared for the exponential failure data under complete sampling and Type‐I censoring. The objective is to quantify the advantage of using the step‐stress testing relative to the constant‐stress one. Assuming a log‐linear life–stress relationship with the cumulative exposure model for the effect of changing stress in step‐stress testing, the optimal design points are determined under C/D/A‐optimality criteria. The efficiency of step‐stress testing to constant‐stress one is then discussed in terms of the ratio of optimal objective functions based on the information matrix. © 2013 Wiley Periodicals, Inc. Naval Research Logistics 00: 000–000, 2013     

Planning gamma accelerated degradation tests with two accelerating variables

Gamma accelerated degradation tests (ADT) are widely used to assess timely lifetime information of highly reliable products with degradation paths that follow a gamma process. In the existing literature, there is interest in addressing the problem of deciding how to conduct an efficient, ADT that includes determinations of higher stress‐testing levels and their corresponding sample‐size allocations. The existing results mainly focused on the case of a single accelerating variable. However, this may not be practical when the quality characteristics of the product have slow degradation rates. To overcome this difficulty, we propose an analytical approach to address this decision‐making problem using the case of two accelerating variables. Specifically, based on the criterion of minimizing the asymptotic variance of the estimated q quantile of lifetime distribution of the product, we analytically show that the optimal stress levels and sample‐size allocations can be simultaneously obtained via a general equivalence theorem. In addition, we use a practical example to illustrate the proposed procedure.     

Production and employment scheduling in multistage production systems

A model is developed for planning optimal production and employment levels in multi-product, multistage production systems. The market requirements for each product over the planning period are given. Backorders and/or shortages are permitted. Backorders and shortages must be considered in order to determine the amount of each product's demand that should be filled, backlogged, or go unsatisfied if the production capacity is insufficient to fill all market requirements. Backorders and shortages, on the other hand, are desirable under certain dynamic market conditions.     

How durable is the nuclear weapons taboo?

The nuclear weapons taboo is considered one of the strongest norms in international politics. A prohibition against using nuclear weapons has seemingly shaped state behavior for nearly seven decades and, according to some observers, made nuclear use ‘unthinkable’ today or in the future. Although scholars have shown that nuclear aversion has affected decision-making behavior, important questions about the nuclear taboo remain unanswered. This article seeks to answer a basic question: How durable is the taboo? We develop different predictions about norm durability depending on whether the taboo is based primarily on moral logic or strategic logic. We use the comparable case of the norm against strategic bombing in the 20th century to evaluate these hypotheses. The logic and evidence presented in this paper suggest that the norm of nuclear non-use is much more fragile than most analysts understand.     

A model for step‐stress accelerated life testing

Modern technology is producing high reliability products. Life testing for such products under normal use condition takes a lot of time to obtain a reasonable number of failures. In this situation a step‐stress procedure is preferred for accelerated life testing. In this paper we assume a Weibull and Lognormal model whose scale parameter depends upon the present level as well as the age at the entry in the present stress level. On the basis of that we propose a parametric model to the life distribution for step‐stress testing and suggest a suitable design to estimate the parameters involved in the model. A simulation study has been done by the proposed model based on maximum likelihood estimation. © 2003 Wiley Periodicals, Inc. Naval Research Logistics, 2003